[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AM3PR04MB12515DB71B8ACF7422A20244E9280@AM3PR04MB1251.eurprd04.prod.outlook.com>
Date: Tue, 14 Nov 2017 08:00:00 +0000
From: Yinbo Zhu <yinbo.zhu@....com>
To: Shawn Guo <shawnguo@...nel.org>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"Catalin Marinas )" <catalin.marinas@....com>,
"Will Deacon )" <will.deacon@....com>,
Harninder Rai <harninder.rai@....com>,
Raghav Dogra <raghav.dogra@....com>,
Ashish Kumar <ashish.kumar@....com>,
Andy Tang <andy.tang@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] arm64: dts: ls1088a: Add USB support
-----Original Message-----
From: Yinbo Zhu
Sent: Tuesday, October 24, 2017 5:15 PM
To: Shawn Guo <shawnguo@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>; Catalin Marinas ) <catalin.marinas@....com>; Will Deacon ) <will.deacon@....com>; Harninder Rai <harninder.rai@....com>; Raghav Dogra <raghav.dogra@....com>; Ashish Kumar <ashish.kumar@....com>; Andy Tang <andy.tang@....com>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@...r.kernel.org>; linux-arm-kernel@...ts.infradead.org; open list <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] arm64: dts: ls1088a: Add USB support
-----Original Message-----
From: Shawn Guo [mailto:shawnguo@...nel.org]
Sent: Friday, September 22, 2017 2:55 PM
To: Yinbo Zhu <yinbo.zhu@....com>
Cc: Rob Herring <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>; Catalin Marinas ) <catalin.marinas@....com>; Will Deacon ) <will.deacon@....com>; Harninder Rai <harninder.rai@....com>; Raghav Dogra <raghav.dogra@....com>; Ashish Kumar <ashish.kumar@....com>; Andy Tang <andy.tang@....com>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@...r.kernel.org>; linux-arm-kernel@...ts.infradead.org; open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ls1088a: Add USB support
On Wed, Sep 13, 2017 at 05:10:09PM +0800, yinbo.zhu@....com wrote:
> From: "yinbo.zhu" <yinbo.zhu@....com>
>
> Fix the issue that usb is not detected on ls1088ardb
>It's not really about fixing issue but adding support.
The patch had been tested on upstream 4.14 code, it can fix the issue.
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@....com>
> Signed-off-by: Ran Wang <ran.wang_1@....com>
> ---
>You should better have a version history here to tell what's changed between version.
>I will add a version history on next v3 patch
Hi,
I had modified the code as v4 version,
https://patchwork.kernel.org/patch/10027393/
please check.
Thanks,
BRs
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb72de93..6c3c3bc4b681 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
>Please sort these labeled nodes alphabetically.
>Shawn
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index c144d06a6e33..c23fede8cf5d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -359,6 +359,26 @@
> status = "disabled";
> };
>
> + usb0: usb3@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + usb1: usb3@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> sata: sata@...0000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.14.1
>
Powered by blists - more mailing lists