lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <03bd1216-7578-2640-dcc2-afaa7bf85854@codeaurora.org>
Date:   Tue, 14 Nov 2017 16:26:42 +0530
From:   Sricharan R <sricharan@...eaurora.org>
To:     bjorn.andersson@...aro.org, ohad@...ery.com, robh+dt@...nel.org,
        mark.rutland@....com, andy.gross@...aro.org,
        david.brown@...aro.org, linux-remoteproc@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org
Subject: Re: [PATCH v5 5/6] remoteproc: qcom: Add support for q6v5-wcss pil



On 11/14/2017 4:23 PM, Sricharan R wrote:
> IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan
> (Lithium) IP. An mdt type single image format is used for the
> firmware. So the mdt_load function can be directly used to load
> the firmware. Also add the relevant resets required for this core.
> 
> Acked-by: Rob Herring <robh@...nel.org>

Infact should have said,
	Acked-by: Rob Herring <robh@...nel.org> (DT bindings)

Regards,
  Sricharan

> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |  7 ++-
>  drivers/remoteproc/Kconfig                         |  1 +
>  drivers/remoteproc/qcom_q6v5_pil.c                 | 53 +++++++++++++++++++++-
>  3 files changed, 59 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 00d3d58..d52d05e 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -11,6 +11,7 @@ on the Qualcomm Hexagon core.
>  		    "qcom,msm8916-mss-pil",
>  		    "qcom,msm8974-mss-pil"
>  		    "qcom,msm8996-mss-pil"
> +		    "qcom,ipq8074-wcss-pil"
>  
>  - reg:
>  	Usage: required
> @@ -49,11 +50,15 @@ on the Qualcomm Hexagon core.
>  	Usage: required
>  	Value type: <phandle>
>  	Definition: reference to the reset-controller for the modem sub-system
> +		    reference to the list of 3 reset-controllers for the
> +		    wcss sub-system
>  
>  - reset-names:
>  	Usage: required
>  	Value type: <stringlist>
> -	Definition: must be "mss_restart"
> +	Definition: must be "mss_restart" for the modem sub-system
> +	Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
> +		    for the wcss syb-system
>  
>  - cx-supply:
>  - mss-supply:
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index bf04479..e7e9979 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -113,6 +113,7 @@ config QCOM_Q6V5_PIL
>  	select MFD_SYSCON
>  	select QCOM_RPROC_COMMON
>  	select QCOM_SCM
> +	select QCOM_MDT_LOADER
>  	help
>  	  Say y here to support the Qualcomm Peripherial Image Loader for the
>  	  Hexagon V5 based remote processors.
> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
> index 75ff02d..3c401ff 100644
> --- a/drivers/remoteproc/qcom_q6v5_pil.c
> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
> @@ -129,6 +129,9 @@ struct q6v5 {
>  	u32 halt_nc;
>  
>  	struct reset_control *mss_restart;
> +	struct reset_control *wcss_aon_reset;
> +	struct reset_control *wcss_reset;
> +	struct reset_control *wcss_q6_reset;
>  
>  	struct qcom_smem_state *state;
>  	unsigned stop_bit;
> @@ -181,6 +184,7 @@ enum {
>  	MSS_MSM8916,
>  	MSS_MSM8974,
>  	MSS_MSM8996,
> +	WCSS_IPQ8074,
>  };
>  
>  static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
> @@ -354,6 +358,21 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
>  	return 0;
>  }
>  
> +static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
> +{
> +	struct q6v5 *qproc = rproc->priv;
> +
> +	return qcom_mdt_load_no_init(qproc->dev, fw, rproc->firmware,
> +				     0, qproc->mba_region, qproc->mba_phys,
> +				     qproc->mba_size);
> +}
> +
> +static const struct rproc_fw_ops q6v5_wcss_fw_ops = {
> +	.find_rsc_table = q6v5_find_rsc_table,
> +	.load = q6v5_wcss_load,
> +	.get_boot_addr = rproc_elf_get_boot_addr,
> +};
> +
>  static const struct rproc_fw_ops q6v5_fw_ops = {
>  	.find_rsc_table = q6v5_find_rsc_table,
>  	.load = q6v5_load,
> @@ -1057,6 +1076,26 @@ static int q6v5_init_clocks(struct device *dev, struct clk **clks,
>  	return i;
>  }
>  
> +static int q6v5_wcss_init_reset(struct q6v5 *qproc)
> +{
> +	qproc->wcss_aon_reset = devm_reset_control_get(qproc->dev,
> +						       "wcss_aon_reset");
> +	if (IS_ERR(qproc->wcss_aon_reset))
> +		return PTR_ERR(qproc->wcss_aon_reset);
> +
> +	qproc->wcss_reset = devm_reset_control_get(qproc->dev,
> +						   "wcss_reset");
> +	if (IS_ERR(qproc->wcss_reset))
> +		return PTR_ERR(qproc->wcss_reset);
> +
> +	qproc->wcss_q6_reset = devm_reset_control_get(qproc->dev,
> +						      "wcss_q6_reset");
> +	if (IS_ERR(qproc->wcss_q6_reset))
> +		return PTR_ERR(qproc->wcss_q6_reset);
> +
> +	return 0;
> +}
> +
>  static int q6v5_init_reset(struct q6v5 *qproc)
>  {
>  	qproc->mss_restart = devm_reset_control_get_exclusive(qproc->dev,
> @@ -1116,6 +1155,9 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
>  		return -EBUSY;
>  	}
>  
> +	if (qproc->version == WCSS_IPQ8074)
> +		return 0;
> +
>  	child = of_get_child_by_name(qproc->dev->of_node, "mpss");
>  	node = of_parse_phandle(child, "memory-region", 0);
>  	ret = of_address_to_resource(node, 0, &r);
> @@ -1159,6 +1201,7 @@ static int q6v5_probe(struct platform_device *pdev)
>  	qproc = (struct q6v5 *)rproc->priv;
>  	qproc->dev = &pdev->dev;
>  	qproc->rproc = rproc;
> +	qproc->version = desc->version;
>  	platform_set_drvdata(pdev, qproc);
>  
>  	init_completion(&qproc->start_done);
> @@ -1208,7 +1251,6 @@ static int q6v5_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto free_rproc;
>  
> -	qproc->version = desc->version;
>  	qproc->need_mem_protection = desc->need_mem_protection;
>  	ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
>  	if (ret < 0)
> @@ -1358,11 +1400,20 @@ static int q6v5_remove(struct platform_device *pdev)
>  	.ops = &q6v5_ops,
>  };
>  
> +static const struct rproc_hexagon_res ipq8074_wcss = {
> +	.hexagon_mba_image = "IPQ8074/q6_fw.mdt",
> +	.need_mem_protection = false,
> +	.version = WCSS_IPQ8074,
> +	.init_reset = q6v5_wcss_init_reset,
> +	.fw_ops = &q6v5_wcss_fw_ops,
> +};
> +
>  static const struct of_device_id q6v5_of_match[] = {
>  	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
>  	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
>  	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
>  	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> +	{ .compatible = "qcom,ipq8074-wcss-pil", .data = &ipq8074_wcss},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, q6v5_of_match);
> 

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ