Message-ID: <20171115074816.GA30662@spreadtrum.com>
Date:   Wed, 15 Nov 2017 15:48:16 +0800
From:   Eric Long <eric.long@...eadtrum.com>
To:     Guenter Roeck <linux@...ck-us.net>, <eric.long@...eadtrum.com>
CC:     Wim Van Sebroeck <wim@...ana.be>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, <baolin.wang@...aro.org>,
        <linux-watchdog@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 2/2] watchdog: Add Spreadtrum watchdog driver

Hi,

Thanks for Guenter's review and detail comments.
Please help to apply this patch if there is no any other comments.

Best regards,
Eric Long

On Fri, Nov 10, 2017 at 01:00:32PM -0800, Guenter Roeck wrote:
> On Mon, Nov 06, 2017 at 10:46:28AM +0800, Eric Long wrote:
> > This patch adds the watchdog driver for Spreadtrum SC9860 platform.
> > 
> > Signed-off-by: Eric Long <eric.long@...eadtrum.com>
> 
> Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> 
> > ---
> > Changes since v5:
> >  - Modify the "irq" type as int type.
> >  - Delete unused api sprd_wdt_is_running().
> > 
> > Changes since v4:
> >  - Remove sprd_wdt_remove().
> >  - Add devm_add_action() for sprd_wdt_disable().
> > 
> > Changes since v3:
> >  - Update Kconfig SPRD_WATCHDOG help messages.
> >  - Correct the wrong spell words.
> >  - Rename SPRD_WDT_CNT_HIGH_VALUE as SPRD_WDT_CNT_HIGH_SHIFT.
> >  - Remove unused macor.
> >  - Update sprd_wdt_set_pretimeout() api.
> >  - Add wdt->wdd.timeout default value.
> >  - Use devm_watchdog_register_device() to register wdt device.
> >  - If module does not support NOWAYOUT, disable wdt when remove this driver.
> >  - Call sprd_wdt_disable() every wdt suspend.
> > 
> > Changes since v2:
> >  - Rename all the macors, add SPRD tag at the head of the macro names.
> >  - Rename SPRD_WDT_CLK as SPRD_WTC_CNT_STEP.
> >  - Remove the code which check timeout value at the wrong place.
> >  - Add min/max timeout value limit.
> >  - Remove set WDOG_HW_RUNNING status at sprd_wdt_enable().
> >  - Add timeout/pretimeout judgment when set them.
> >  - Support WATCHDOG_NOWAYOUT status.
> > 
> > Changes since v1:
> >  - Use pretimeout instead of own implementation.
> >  - Fix timeout loop when loading timeout values.
> >  - use the infrastructure to read and set "timeout-sec" property.
> >  - Add conditions when start or stop watchdog.
> >  - Change the position of enabling watchdog.
> >  - Other optimization.
> > ---
> >  drivers/watchdog/Kconfig    |   8 +
> >  drivers/watchdog/Makefile   |   1 +
> >  drivers/watchdog/sprd_wdt.c | 399 ++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 408 insertions(+)
> >  create mode 100644 drivers/watchdog/sprd_wdt.c
> > 
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index c722cbf..3367a8c 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -787,6 +787,14 @@ config UNIPHIER_WATCHDOG
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called uniphier_wdt.
> >  
> > +config SPRD_WATCHDOG
> > +	tristate "Spreadtrum watchdog support"
> > +	depends on ARCH_SPRD || COMPILE_TEST
> > +	select WATCHDOG_CORE
> > +	help
> > +	  Say Y here to include watchdog timer supported
> > +	  by Spreadtrum system.
> > +
> >  # AVR32 Architecture
> >  
> >  config AT32AP700X_WDT
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index 56adf9f..187cca2 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -87,6 +87,7 @@ obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
> >  obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
> >  obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
> >  obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
> > +obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
> >  
> >  # AVR32 Architecture
> >  obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> > diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c
> > new file mode 100644
> > index 0000000..a8b280f
> > --- /dev/null
> > +++ b/drivers/watchdog/sprd_wdt.c
> > @@ -0,0 +1,399 @@
> > +/*
> > + * Spreadtrum watchdog driver
> > + * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> > + * General Public License for more details.
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/watchdog.h>
> > +
> > +#define SPRD_WDT_LOAD_LOW		0x0
> > +#define SPRD_WDT_LOAD_HIGH		0x4
> > +#define SPRD_WDT_CTRL			0x8
> > +#define SPRD_WDT_INT_CLR		0xc
> > +#define SPRD_WDT_INT_RAW		0x10
> > +#define SPRD_WDT_INT_MSK		0x14
> > +#define SPRD_WDT_CNT_LOW		0x18
> > +#define SPRD_WDT_CNT_HIGH		0x1c
> > +#define SPRD_WDT_LOCK			0x20
> > +#define SPRD_WDT_IRQ_LOAD_LOW		0x2c
> > +#define SPRD_WDT_IRQ_LOAD_HIGH		0x30
> > +
> > +/* WDT_CTRL */
> > +#define SPRD_WDT_INT_EN_BIT		BIT(0)
> > +#define SPRD_WDT_CNT_EN_BIT		BIT(1)
> > +#define SPRD_WDT_NEW_VER_EN		BIT(2)
> > +#define SPRD_WDT_RST_EN_BIT		BIT(3)
> > +
> > +/* WDT_INT_CLR */
> > +#define SPRD_WDT_INT_CLEAR_BIT		BIT(0)
> > +#define SPRD_WDT_RST_CLEAR_BIT		BIT(3)
> > +
> > +/* WDT_INT_RAW */
> > +#define SPRD_WDT_INT_RAW_BIT		BIT(0)
> > +#define SPRD_WDT_RST_RAW_BIT		BIT(3)
> > +#define SPRD_WDT_LD_BUSY_BIT		BIT(4)
> > +
> > +/* 1s equal to 32768 counter steps */
> > +#define SPRD_WDT_CNT_STEP		32768
> > +
> > +#define SPRD_WDT_UNLOCK_KEY		0xe551
> > +#define SPRD_WDT_MIN_TIMEOUT		3
> > +#define SPRD_WDT_MAX_TIMEOUT		60
> > +
> > +#define SPRD_WDT_CNT_HIGH_SHIFT		16
> > +#define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
> > +#define SPRD_WDT_LOAD_TIMEOUT		1000
> > +
> > +struct sprd_wdt {
> > +	void __iomem *base;
> > +	struct watchdog_device wdd;
> > +	struct clk *enable;
> > +	struct clk *rtc_enable;
> > +	int irq;
> > +};
> > +
> > +static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd)
> > +{
> > +	return container_of(wdd, struct sprd_wdt, wdd);
> > +}
> > +
> > +static inline void sprd_wdt_lock(void __iomem *addr)
> > +{
> > +	writel_relaxed(0x0, addr + SPRD_WDT_LOCK);
> > +}
> > +
> > +static inline void sprd_wdt_unlock(void __iomem *addr)
> > +{
> > +	writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK);
> > +}
> > +
> > +static irqreturn_t sprd_wdt_isr(int irq, void *dev_id)
> > +{
> > +	struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR);
> > +	sprd_wdt_lock(wdt->base);
> > +	watchdog_notify_pretimeout(&wdt->wdd);
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt)
> > +{
> > +	u32 val;
> > +
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) <<
> > +		SPRD_WDT_CNT_HIGH_SHIFT;
> > +	val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) &
> > +		SPRD_WDT_LOW_VALUE_MASK;
> > +
> > +	return val;
> > +}
> > +
> > +static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
> > +			       u32 pretimeout)
> > +{
> > +	u32 val, delay_cnt = 0;
> > +	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
> > +	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> > +		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
> > +	writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK),
> > +		       wdt->base + SPRD_WDT_LOAD_LOW);
> > +	writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
> > +			SPRD_WDT_LOW_VALUE_MASK,
> > +		       wdt->base + SPRD_WDT_IRQ_LOAD_HIGH);
> > +	writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK,
> > +		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
> > +	sprd_wdt_lock(wdt->base);
> > +
> > +	/*
> > +	 * Waiting the load value operation done,
> > +	 * it needs two or three RTC clock cycles.
> > +	 */
> > +	do {
> > +		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
> > +		if (!(val & SPRD_WDT_LD_BUSY_BIT))
> > +			break;
> > +
> > +		cpu_relax();
> > +	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
> > +
> > +	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
> > +		return -EBUSY;
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_enable(struct sprd_wdt *wdt)
> > +{
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(wdt->enable);
> > +	if (ret)
> > +		return ret;
> > +	ret = clk_prepare_enable(wdt->rtc_enable);
> > +	if (ret)
> > +		return ret;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val |= SPRD_WDT_NEW_VER_EN;
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	return 0;
> > +}
> > +
> > +static void sprd_wdt_disable(void *_data)
> > +{
> > +	struct sprd_wdt *wdt = _data;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +
> > +	clk_disable_unprepare(wdt->rtc_enable);
> > +	clk_disable_unprepare(wdt->enable);
> > +}
> > +
> > +static int sprd_wdt_start(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +	int ret;
> > +
> > +	ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout);
> > +	if (ret)
> > +		return ret;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT;
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	set_bit(WDOG_HW_RUNNING, &wdd->status);
> > +
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_stop(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +
> > +	sprd_wdt_unlock(wdt->base);
> > +	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
> > +	val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT |
> > +		SPRD_WDT_INT_EN_BIT);
> > +	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
> > +	sprd_wdt_lock(wdt->base);
> > +	return 0;
> > +}
> > +
> > +static int sprd_wdt_set_timeout(struct watchdog_device *wdd,
> > +				u32 timeout)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +
> > +	if (timeout == wdd->timeout)
> > +		return 0;
> > +
> > +	wdd->timeout = timeout;
> > +
> > +	return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout);
> > +}
> > +
> > +static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd,
> > +				   u32 new_pretimeout)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +
> > +	if (new_pretimeout < wdd->min_timeout)
> > +		return -EINVAL;
> > +
> > +	wdd->pretimeout = new_pretimeout;
> > +
> > +	return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout);
> > +}
> > +
> > +static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd)
> > +{
> > +	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
> > +	u32 val;
> > +
> > +	val = sprd_wdt_get_cnt_value(wdt);
> > +	val = val / SPRD_WDT_CNT_STEP;
> > +
> > +	return val;
> > +}
> > +
> > +static const struct watchdog_ops sprd_wdt_ops = {
> > +	.owner = THIS_MODULE,
> > +	.start = sprd_wdt_start,
> > +	.stop = sprd_wdt_stop,
> > +	.set_timeout = sprd_wdt_set_timeout,
> > +	.set_pretimeout = sprd_wdt_set_pretimeout,
> > +	.get_timeleft = sprd_wdt_get_timeleft,
> > +};
> > +
> > +static const struct watchdog_info sprd_wdt_info = {
> > +	.options = WDIOF_SETTIMEOUT |
> > +		   WDIOF_PRETIMEOUT |
> > +		   WDIOF_MAGICCLOSE |
> > +		   WDIOF_KEEPALIVEPING,
> > +	.identity = "Spreadtrum Watchdog Timer",
> > +};
> > +
> > +static int sprd_wdt_probe(struct platform_device *pdev)
> > +{
> > +	struct resource *wdt_res;
> > +	struct sprd_wdt *wdt;
> > +	int ret;
> > +
> > +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> > +	if (!wdt)
> > +		return -ENOMEM;
> > +
> > +	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
> > +	if (IS_ERR(wdt->base)) {
> > +		dev_err(&pdev->dev, "failed to map memory resource\n");
> > +		return PTR_ERR(wdt->base);
> > +	}
> > +
> > +	wdt->enable = devm_clk_get(&pdev->dev, "enable");
> > +	if (IS_ERR(wdt->enable)) {
> > +		dev_err(&pdev->dev, "can't get the enable clock\n");
> > +		return PTR_ERR(wdt->enable);
> > +	}
> > +
> > +	wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable");
> > +	if (IS_ERR(wdt->rtc_enable)) {
> > +		dev_err(&pdev->dev, "can't get the rtc enable clock\n");
> > +		return PTR_ERR(wdt->rtc_enable);
> > +	}
> > +
> > +	wdt->irq = platform_get_irq(pdev, 0);
> > +	if (wdt->irq < 0) {
> > +		dev_err(&pdev->dev, "failed to get IRQ resource\n");
> > +		return wdt->irq;
> > +	}
> > +
> > +	ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr,
> > +			       IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "failed to register irq\n");
> > +		return ret;
> > +	}
> > +
> > +	wdt->wdd.info = &sprd_wdt_info;
> > +	wdt->wdd.ops = &sprd_wdt_ops;
> > +	wdt->wdd.parent = &pdev->dev;
> > +	wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT;
> > +	wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT;
> > +	wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT;
> > +
> > +	ret = sprd_wdt_enable(wdt);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "failed to enable wdt\n");
> > +		return ret;
> > +	}
> > +	ret = devm_add_action(&pdev->dev, sprd_wdt_disable, wdt);
> > +	if (ret) {
> > +		sprd_wdt_disable(wdt);
> > +		dev_err(&pdev->dev, "Failed to add wdt disable action\n");
> > +		return ret;
> > +	}
> > +
> > +	watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT);
> > +	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
> > +
> > +	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
> > +	if (ret) {
> > +		sprd_wdt_disable(wdt);
> > +		dev_err(&pdev->dev, "failed to register watchdog\n");
> > +		return ret;
> > +	}
> > +	platform_set_drvdata(pdev, wdt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)
> > +{
> > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> > +
> > +	if (watchdog_active(wdd))
> > +		sprd_wdt_stop(&wdt->wdd);
> > +	sprd_wdt_disable(wdt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
> > +{
> > +	struct watchdog_device *wdd = dev_get_drvdata(dev);
> > +	struct sprd_wdt *wdt = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	ret = sprd_wdt_enable(wdt);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (watchdog_active(wdd)) {
> > +		ret = sprd_wdt_start(&wdt->wdd);
> > +		if (ret) {
> > +			sprd_wdt_disable(wdt);
> > +			return ret;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops sprd_wdt_pm_ops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend,
> > +				sprd_wdt_pm_resume)
> > +};
> > +
> > +static const struct of_device_id sprd_wdt_match_table[] = {
> > +	{ .compatible = "sprd,sp9860-wdt", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, sprd_wdt_match_table);
> > +
> > +static struct platform_driver sprd_watchdog_driver = {
> > +	.probe	= sprd_wdt_probe,
> > +	.driver	= {
> > +		.name = "sprd-wdt",
> > +		.of_match_table = sprd_wdt_match_table,
> > +		.pm = &sprd_wdt_pm_ops,
> > +	},
> > +};
> > +module_platform_driver(sprd_watchdog_driver);
> > +
> > +MODULE_AUTHOR("Eric Long <eric.long@...eadtrum.com>");
> > +MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver");
> > +MODULE_LICENSE("GPL v2");
> > -- 
> > 1.9.1
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists