linux-kernel - Re: [PATCH V1 1/4] qcom: spmi-wled: Add support for qcom wled driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 17 Nov 2017 15:22:32 +0530
From:   kgunda@...eaurora.org
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, Lee Jones <lee.jones@...aro.org>,
        Daniel Thompson <daniel.thompson@...aro.org>,
        Jingoo Han <jingoohan1@...il.com>,
        Richard Purdie <rpurdie@...ys.net>,
        Jacek Anaszewski <jacek.anaszewski@...il.com>,
        Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
        linux-arm-msm-owner@...r.kernel.org
Subject: Re: [PATCH V1 1/4] qcom: spmi-wled: Add support for qcom wled driver

On 2017-11-17 12:26, Bjorn Andersson wrote:
> On Thu 16 Nov 22:36 PST 2017, kgunda@...eaurora.org wrote:
> 
>> On 2017-11-16 22:25, Bjorn Andersson wrote:
>> > On Thu 16 Nov 04:18 PST 2017, Kiran Gunda wrote:
>> >
>> > > WLED driver provides the interface to the display driver to
>> > > adjust the brightness of the display backlight.
>> > >
>> >
>> > Hi Kiran,
>> >
>> > This driver has a lot in common with the already upstream pm8941-wled.c,
>> > because it's just a new revision of the same block.
>> >
>> > Please extend the existing driver rather than providing a new one
>> > (and yes, renaming the file is okay).
>> >
>> > Regards,
>> > Bjorn
>> 
>> Hi Bjorn,
>> 
>> Yes this driver design is similar to pm8941, however the WLED HW block
>> has undergone quite a few changes in analog and digital from PM8941 to
>> PM8998.
> 
> I can see that, looking at the documentation.
> 
>> Few of them include splitting one module into wled-ctrl and wled-sink
>> peripherals, changes in the register offsets and the bit
>> interpretation.
> 
> This is typical and something we need to handle in all these drivers, 
> to
> avoid having one driver per platform.
> 
>> Hence we concluded that it was better to have a new driver to support
>> this new gen WELD module and decouple it from the pm8941.
> 
> Okay, I can see how it's easier to not have to case about anything but
> pmi8998 in this driver, but where do you add the support for other WLED
> versions? What about PMI8994? Will there not be similar differences
> (registers that has moved around) in the future?
> 
>> Also, going forward this driver will support AMOLED AVDD rail (not
>> supported by pm8941) touching a few more registers/configuration and
>> newer PMICs.
> 
> Is this a feature that was introduced in PMI8998? Will this support not
> be dependent on the pmic version?
> 
>> So spinning off a new driver would make it cleaner and easier to
>> extend further.
>> 
> 
> It's for sure easier at this point in time, but your argumentation
> implies that PMI8998+1 should go into it's own driver as well.
> 
> I suspect that if you're going to reuse this driver for future PMIC
> versions you will have to deal with register layout differences and new
> feature set, and as such I'm not convinced that a new driver is needed.
> 
> 
> Can you give any concrete examples of where it is not possible or
> undesirable to maintain the pm8941 support in the same driver?
> 
> Regards,
> Bjorn

Hi Bjorn,

Thanks for the inputs! Following are the reasons to go for the new 
driver
and this driver can support 5 PMICs.

1.Majority of  register, offsets and config values don’t match  up  
between
  PMI8998 and PM8941
2.Feature such as – SC protection handling in SW cannot be done for 8941 
as
there is no SC event/irq, AMOELD AVDD cannot supported by PM8941
3.Feature such as – string auto-calibration even if common will have to 
use
different offsets/registers in the same SW logic
4.PMI8998, PMI8994, PMI8950 and PM660 all of them have this same WLED 
module
(and register map) with very minor changes unlike 8941.

Thanks,
Kiran


> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-arm-msm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html