[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171120133222.27771-13-niklas.cassel@axis.com>
Date: Mon, 20 Nov 2017 14:32:15 +0100
From: Niklas Cassel <niklas.cassel@...s.com>
To: Niklas Cassel <niklass@...s.com>,
Jesper Nilsson <jespern@...s.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-arm-kernel@...s.com, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v5 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions
Split artpec6_pcie_establish_link() into smaller functions
to better match other drivers such as dra7xx and imx6.
This is also done to prepare for endpoint mode support.
Signed-off-by: Niklas Cassel <niklas.cassel@...s.com>
---
drivers/pci/dwc/pcie-artpec6.c | 55 ++++++++++++++++++++++--------------------
1 file changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 18075e0fab80..b2783b475c2a 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -34,8 +34,6 @@ struct artpec6_pcie {
/* PCIe Port Logic registers (memory-mapped) */
#define PL_OFFSET 0x700
-#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
/* ARTPEC-6 specific registers */
#define PCIECFG 0x18
@@ -80,18 +78,23 @@ static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
}
-static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
+static int artpec6_pcie_establish_link(struct dw_pcie *pci)
{
- struct dw_pcie *pci = artpec6_pcie->pci;
- struct pcie_port *pp = &pci->pp;
+ struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
u32 val;
- unsigned int retries;
- /* Hold DW core in reset */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val |= PCIECFG_CORE_RESET_REQ;
+ val |= PCIECFG_LTSSM_ENABLE;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+ return 0;
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;
+ unsigned int retries;
+
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */
PCIECFG_MODE_TX_DRV_EN |
@@ -131,30 +134,25 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
val = readl(artpec6_pcie->phy_base + PHY_STATUS);
retries--;
} while (retries && !(val & PHY_COSPLLLOCK));
+}
+
+static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;
- /* Take DW core out of reset */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val &= ~PCIECFG_CORE_RESET_REQ;
+ val |= PCIECFG_CORE_RESET_REQ;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
- usleep_range(100, 200);
+}
- /* setup root complex */
- dw_pcie_setup_rc(pp);
+static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+ u32 val;
- /* assert LTSSM enable */
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val |= PCIECFG_LTSSM_ENABLE;
+ val &= ~PCIECFG_CORE_RESET_REQ;
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
-
- /* check if the link is up or not */
- if (!dw_pcie_wait_for_link(pci))
- return 0;
-
- dev_dbg(pci->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
-
- return -ETIMEDOUT;
+ usleep_range(100, 200);
}
static void artpec6_pcie_enable_interrupts(struct artpec6_pcie *artpec6_pcie)
@@ -171,7 +169,12 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
- artpec6_pcie_establish_link(artpec6_pcie);
+ artpec6_pcie_assert_core_reset(artpec6_pcie);
+ artpec6_pcie_init_phy(artpec6_pcie);
+ artpec6_pcie_deassert_core_reset(artpec6_pcie);
+ dw_pcie_setup_rc(pp);
+ artpec6_pcie_establish_link(pci);
+ dw_pcie_wait_for_link(pci);
artpec6_pcie_enable_interrupts(artpec6_pcie);
return 0;
--
2.14.2
Powered by blists - more mailing lists