| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1511256206-1587-11-git-send-email-mgautam@codeaurora.org>
Date: Tue, 21 Nov 2017 14:53:20 +0530
From: Manu Gautam <mgautam@...eaurora.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
Manu Gautam <mgautam@...eaurora.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Varadarajan Narayanan <varada@...eaurora.org>,
Wei Yongjun <weiyongjun1@...wei.com>,
Fengguang Wu <fengguang.wu@...el.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v3 10/16] phy: qcom-qmp: Move register offsets to header file
New revision (v3) of QMP PHY uses different offsets
for almost all of the registers. Hence, move these
definitions to header file so that updated offsets
can be added for QMP v3.
Signed-off-by: Manu Gautam <mgautam@...eaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 119 +------------------------------
drivers/phy/qualcomm/phy-qcom-qmp.h | 137 ++++++++++++++++++++++++++++++++++++
2 files changed, 138 insertions(+), 118 deletions(-)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 263cf50..15a734f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -31,124 +31,7 @@
#include <dt-bindings/phy/phy.h>
-/* QMP PHY QSERDES COM registers */
-#define QSERDES_COM_BG_TIMER 0x00c
-#define QSERDES_COM_SSC_EN_CENTER 0x010
-#define QSERDES_COM_SSC_ADJ_PER1 0x014
-#define QSERDES_COM_SSC_ADJ_PER2 0x018
-#define QSERDES_COM_SSC_PER1 0x01c
-#define QSERDES_COM_SSC_PER2 0x020
-#define QSERDES_COM_SSC_STEP_SIZE1 0x024
-#define QSERDES_COM_SSC_STEP_SIZE2 0x028
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034
-#define QSERDES_COM_CLK_ENABLE1 0x038
-#define QSERDES_COM_SYS_CLK_CTRL 0x03c
-#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040
-#define QSERDES_COM_PLL_IVCO 0x048
-#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c
-#define QSERDES_COM_LOCK_CMP2_MODE0 0x050
-#define QSERDES_COM_LOCK_CMP3_MODE0 0x054
-#define QSERDES_COM_LOCK_CMP1_MODE1 0x058
-#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c
-#define QSERDES_COM_LOCK_CMP3_MODE1 0x060
-#define QSERDES_COM_BG_TRIM 0x070
-#define QSERDES_COM_CLK_EP_DIV 0x074
-#define QSERDES_COM_CP_CTRL_MODE0 0x078
-#define QSERDES_COM_CP_CTRL_MODE1 0x07c
-#define QSERDES_COM_PLL_RCTRL_MODE0 0x084
-#define QSERDES_COM_PLL_RCTRL_MODE1 0x088
-#define QSERDES_COM_PLL_CCTRL_MODE0 0x090
-#define QSERDES_COM_PLL_CCTRL_MODE1 0x094
-#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
-#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac
-#define QSERDES_COM_RESETSM_CNTRL 0x0b4
-#define QSERDES_COM_RESTRIM_CTRL 0x0bc
-#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4
-#define QSERDES_COM_LOCK_CMP_EN 0x0c8
-#define QSERDES_COM_LOCK_CMP_CFG 0x0cc
-#define QSERDES_COM_DEC_START_MODE0 0x0d0
-#define QSERDES_COM_DEC_START_MODE1 0x0d4
-#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc
-#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0
-#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4
-#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8
-#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec
-#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114
-#define QSERDES_COM_VCO_TUNE_CTRL 0x124
-#define QSERDES_COM_VCO_TUNE_MAP 0x128
-#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c
-#define QSERDES_COM_VCO_TUNE2_MODE0 0x130
-#define QSERDES_COM_VCO_TUNE1_MODE1 0x134
-#define QSERDES_COM_VCO_TUNE2_MODE1 0x138
-#define QSERDES_COM_VCO_TUNE_TIMER1 0x144
-#define QSERDES_COM_VCO_TUNE_TIMER2 0x148
-#define QSERDES_COM_BG_CTRL 0x170
-#define QSERDES_COM_CLK_SELECT 0x174
-#define QSERDES_COM_HSCLK_SEL 0x178
-#define QSERDES_COM_CORECLK_DIV 0x184
-#define QSERDES_COM_CORE_CLK_EN 0x18c
-#define QSERDES_COM_C_READY_STATUS 0x190
-#define QSERDES_COM_CMN_CONFIG 0x194
-#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c
-#define QSERDES_COM_DEBUG_BUS0 0x1a0
-#define QSERDES_COM_DEBUG_BUS1 0x1a4
-#define QSERDES_COM_DEBUG_BUS2 0x1a8
-#define QSERDES_COM_DEBUG_BUS3 0x1ac
-#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0
-#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc
-
-/* QMP PHY TX registers */
-#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054
-#define QSERDES_TX_DEBUG_BUS_SEL 0x064
-#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
-#define QSERDES_TX_LANE_MODE 0x094
-#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac
-
-/* QMP PHY RX registers */
-#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010
-#define QSERDES_RX_UCDR_SO_GAIN 0x01c
-#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040
-#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048
-#define QSERDES_RX_RX_TERM_BW 0x090
-#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4
-#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8
-#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc
-#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0
-#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108
-#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c
-#define QSERDES_RX_SIGDET_ENABLES 0x110
-#define QSERDES_RX_SIGDET_CNTRL 0x114
-#define QSERDES_RX_SIGDET_LVL 0x118
-#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c
-#define QSERDES_RX_RX_BAND 0x120
-#define QSERDES_RX_RX_INTERFACE_MODE 0x12c
-
-/* QMP PHY PCS registers */
-#define QPHY_POWER_DOWN_CONTROL 0x04
-#define QPHY_TXDEEMPH_M6DB_V0 0x24
-#define QPHY_TXDEEMPH_M3P5DB_V0 0x28
-#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54
-#define QPHY_RX_IDLE_DTCT_CNTRL 0x58
-#define QPHY_POWER_STATE_CONFIG1 0x60
-#define QPHY_POWER_STATE_CONFIG2 0x64
-#define QPHY_POWER_STATE_CONFIG4 0x6c
-#define QPHY_LOCK_DETECT_CONFIG1 0x80
-#define QPHY_LOCK_DETECT_CONFIG2 0x84
-#define QPHY_LOCK_DETECT_CONFIG3 0x88
-#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0
-#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4
-#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8
-#define QPHY_OSC_DTCT_ACTIONS 0x1AC
-#define QPHY_RX_SIGDET_LVL 0x1D8
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
-#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
+#include "phy-qcom-qmp.h"
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
new file mode 100644
index 0000000..d930ca7
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2017, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef QCOM_PHY_QMP_H_
+#define QCOM_PHY_QMP_H_
+
+/* Only for QMP V2 PHY - QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER 0x00c
+#define QSERDES_COM_SSC_EN_CENTER 0x010
+#define QSERDES_COM_SSC_ADJ_PER1 0x014
+#define QSERDES_COM_SSC_ADJ_PER2 0x018
+#define QSERDES_COM_SSC_PER1 0x01c
+#define QSERDES_COM_SSC_PER2 0x020
+#define QSERDES_COM_SSC_STEP_SIZE1 0x024
+#define QSERDES_COM_SSC_STEP_SIZE2 0x028
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034
+#define QSERDES_COM_CLK_ENABLE1 0x038
+#define QSERDES_COM_SYS_CLK_CTRL 0x03c
+#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040
+#define QSERDES_COM_PLL_IVCO 0x048
+#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c
+#define QSERDES_COM_LOCK_CMP2_MODE0 0x050
+#define QSERDES_COM_LOCK_CMP3_MODE0 0x054
+#define QSERDES_COM_LOCK_CMP1_MODE1 0x058
+#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c
+#define QSERDES_COM_LOCK_CMP3_MODE1 0x060
+#define QSERDES_COM_BG_TRIM 0x070
+#define QSERDES_COM_CLK_EP_DIV 0x074
+#define QSERDES_COM_CP_CTRL_MODE0 0x078
+#define QSERDES_COM_CP_CTRL_MODE1 0x07c
+#define QSERDES_COM_PLL_RCTRL_MODE0 0x084
+#define QSERDES_COM_PLL_RCTRL_MODE1 0x088
+#define QSERDES_COM_PLL_CCTRL_MODE0 0x090
+#define QSERDES_COM_PLL_CCTRL_MODE1 0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
+#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac
+#define QSERDES_COM_RESETSM_CNTRL 0x0b4
+#define QSERDES_COM_RESTRIM_CTRL 0x0bc
+#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4
+#define QSERDES_COM_LOCK_CMP_EN 0x0c8
+#define QSERDES_COM_LOCK_CMP_CFG 0x0cc
+#define QSERDES_COM_DEC_START_MODE0 0x0d0
+#define QSERDES_COM_DEC_START_MODE1 0x0d4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc
+#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4
+#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8
+#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec
+#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114
+#define QSERDES_COM_VCO_TUNE_CTRL 0x124
+#define QSERDES_COM_VCO_TUNE_MAP 0x128
+#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c
+#define QSERDES_COM_VCO_TUNE2_MODE0 0x130
+#define QSERDES_COM_VCO_TUNE1_MODE1 0x134
+#define QSERDES_COM_VCO_TUNE2_MODE1 0x138
+#define QSERDES_COM_VCO_TUNE_TIMER1 0x144
+#define QSERDES_COM_VCO_TUNE_TIMER2 0x148
+#define QSERDES_COM_BG_CTRL 0x170
+#define QSERDES_COM_CLK_SELECT 0x174
+#define QSERDES_COM_HSCLK_SEL 0x178
+#define QSERDES_COM_CORECLK_DIV 0x184
+#define QSERDES_COM_CORE_CLK_EN 0x18c
+#define QSERDES_COM_C_READY_STATUS 0x190
+#define QSERDES_COM_CMN_CONFIG 0x194
+#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c
+#define QSERDES_COM_DEBUG_BUS0 0x1a0
+#define QSERDES_COM_DEBUG_BUS1 0x1a4
+#define QSERDES_COM_DEBUG_BUS2 0x1a8
+#define QSERDES_COM_DEBUG_BUS3 0x1ac
+#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0
+#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc
+
+/* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054
+#define QSERDES_TX_DEBUG_BUS_SEL 0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
+#define QSERDES_TX_LANE_MODE 0x094
+#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac
+
+/* Only for QMP V2 PHY - RX registers */
+#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010
+#define QSERDES_RX_UCDR_SO_GAIN 0x01c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048
+#define QSERDES_RX_RX_TERM_BW 0x090
+#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c
+#define QSERDES_RX_SIGDET_ENABLES 0x110
+#define QSERDES_RX_SIGDET_CNTRL 0x114
+#define QSERDES_RX_SIGDET_LVL 0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c
+#define QSERDES_RX_RX_BAND 0x120
+#define QSERDES_RX_RX_INTERFACE_MODE 0x12c
+
+/* Only for QMP V2 PHY - PCS registers */
+#define QPHY_POWER_DOWN_CONTROL 0x04
+#define QPHY_TXDEEMPH_M6DB_V0 0x24
+#define QPHY_TXDEEMPH_M3P5DB_V0 0x28
+#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54
+#define QPHY_RX_IDLE_DTCT_CNTRL 0x58
+#define QPHY_POWER_STATE_CONFIG1 0x60
+#define QPHY_POWER_STATE_CONFIG2 0x64
+#define QPHY_POWER_STATE_CONFIG4 0x6c
+#define QPHY_LOCK_DETECT_CONFIG1 0x80
+#define QPHY_LOCK_DETECT_CONFIG2 0x84
+#define QPHY_LOCK_DETECT_CONFIG3 0x88
+#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0
+#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8
+#define QPHY_OSC_DTCT_ACTIONS 0x1AC
+#define QPHY_RX_SIGDET_LVL 0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists