early console in setup code Probing EDD (edd=off to disable)... ok early console in extract_kernel input_data: 0x00000000048dd276 input_len: 0x0000000001a9cacb output: 0x0000000001000000 output_len: 0x0000000004a10ec0 kernel_total_size: 0x00000000053a9000 booted via startup_32() Physical KASLR using RDTSC... Virtual KASLR using RDTSC... Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel. [ 0.000000] Linux version 4.14.0-12891-gc8a0739 (kbuild@athens) (gcc version 6.4.0 20171026 (Debian 6.4.0-9)) #14 SMP Mon Nov 20 16:41:36 CST 2017 [ 0.000000] Command line: ip=::::vm-lkp-wsx03-yocto-x86_64-18::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-yocto-x86_64-18/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-c8a0739b185d11d6e2ca7ad9f5835841d1cfc765-20171120-97995-o5usht-0.yaml ARCH=x86_64 kconfig=x86_64-allyesdebian branch=linus/master commit=c8a0739b185d11d6e2ca7ad9f5835841d1cfc765 BOOT_IMAGE=/pkg/linux/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/vmlinuz-4.14.0-12891-gc8a0739 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=norma [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffde000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3ffde max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Memory KASLR using RDTSC... [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [ffffffffff000a90] [ 0.000000] mpc: f6aa0-f6b78 [ 0.000000] Base memory trampoline at [ffff8e4440099000] 99000 size 24576 [ 0.000000] BRK [0x2a37e000, 0x2a37efff] PGTABLE [ 0.000000] BRK [0x2a37f000, 0x2a37ffff] PGTABLE [ 0.000000] BRK [0x2a380000, 0x2a380fff] PGTABLE [ 0.000000] BRK [0x2a381000, 0x2a381fff] PGTABLE [ 0.000000] BRK [0x2a382000, 0x2a382fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3f814000-0x3ffcffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000003FFE15CE 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000003FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000003FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000003FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000003FFE151E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000003FFE1596 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fd000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffddfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3ffda000-0x3ffddfff] [ 0.000000] kvm-clock: cpu 0, msr 0:3ffd1001, primary cpu clock [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 5424868816 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003ffddfff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffddfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffddfff] [ 0.000000] On node 0 totalpages: 262012 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3528 pages used for memmap [ 0.000000] DMA32 zone: 258014 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000) [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 488 pages/cpu @ffff8e447f400000 s1959968 r8192 d30688 u2097152 [ 0.000000] pcpu-alloc: s1959968 r8192 d30688 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 3f40dd80 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258407 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: ip=::::vm-lkp-wsx03-yocto-x86_64-18::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-yocto-x86_64-18/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-c8a0739b185d11d6e2ca7ad9f5835841d1cfc765-20171120-97995-o5usht-0.yaml ARCH=x86_64 kconfig=x86_64-allyesdebian branch=linus/master commit=c8a0739b185d11d6e2ca7ad9f5835841d1cfc765 BOOT_IMAGE=/pkg/linux/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/vmlinuz-4.14.0-12891-gc8a0739 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vg [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 938000K/1048048K available (32256K kernel code, 5016K rwdata, 15168K rodata, 4772K init, 16660K bss, 110048K reserved, 0K cma-reserved) [ 0.000000] ftrace: allocating 135554 entries in 530 pages [ 0.004000] Running RCU self tests [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU event tracing is enabled. [ 0.004000] RCU lockdep checking is enabled. [ 0.004000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. [ 0.004000] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.004000] NR_IRQS: 33024, nr_irqs: 256, preallocated irqs: 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] bootconsole [earlyser0] disabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004000] ... MAX_LOCK_DEPTH: 48 [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004000] ... CLASSHASH_SIZE: 4096 [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.004000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.004000] ... CHAINHASH_SIZE: 32768 [ 0.004000] memory used by lock dependency info: 7903 kB [ 0.004000] per task-struct memory footprint: 3072 bytes [ 0.004000] ------------------------ [ 0.004000] | Locking API testsuite: [ 0.004000] ---------------------------------------------------------------------------- [ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] A-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] double unlock: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] initialize held: ok | ok | ok | ok | ok | ok | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] recursive read-lock: | ok | | ok | [ 0.004000] recursive read-lock #2: | ok | | ok | [ 0.004000] mixed read-write-lock: | ok | | ok | [ 0.004000] mixed write-read-lock: | ok | | ok | [ 0.004000] mixed read-lock/lock-write ABBA: |FAILED| | ok | [ 0.004000] mixed read-lock/lock-read ABBA: | ok | | ok | [ 0.004000] mixed write-lock/lock-write ABBA: | ok | | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.004000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.004000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.004000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.004000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.004000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.004000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.004000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.004000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.004000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.004000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.004000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.004000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.004000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.004000] hard-irq read-recursion/123: ok | [ 0.004000] soft-irq read-recursion/123: ok | [ 0.004000] hard-irq read-recursion/132: ok | [ 0.004000] soft-irq read-recursion/132: ok | [ 0.004000] hard-irq read-recursion/213: ok | [ 0.004000] soft-irq read-recursion/213: ok | [ 0.004000] hard-irq read-recursion/231: ok | [ 0.004000] soft-irq read-recursion/231: ok | [ 0.004000] hard-irq read-recursion/312: ok | [ 0.004000] soft-irq read-recursion/312: ok | [ 0.004000] hard-irq read-recursion/321: ok | [ 0.004000] soft-irq read-recursion/321: ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] | Wound/wait tests | [ 0.004000] --------------------- [ 0.004000] ww api failures: ok | ok | ok | [ 0.004000] ww contexts mixing: ok | ok | [ 0.004000] finishing ww context: ok | ok | ok | ok | [ 0.004000] locking mismatches: ok | ok | ok | [ 0.004000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.004000] spinlock nest unlocked: ok | [ 0.004000] ----------------------------------------------------- [ 0.004000] |block | try |context| [ 0.004000] ----------------------------------------------------- [ 0.004000] context: ok | ok | ok | [ 0.004000] try: ok | ok | ok | [ 0.004000] block: ok | ok | ok | [ 0.004000] spinlock: ok | ok | ok | [ 0.004000] ------------------------------------------------------- [ 0.004000] Good, all 261 testcases passed! | [ 0.004000] --------------------------------- [ 0.004000] ACPI: Core revision 20170831 [ 0.004000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.004000] hpet clockevent registered [ 0.004314] APIC: Switch to symmetric I/O mode setup [ 0.013263] x2apic enabled [ 0.016041] Switched APIC routing to physical x2apic. [ 0.020167] enabled ExtINT on CPU#0 [ 0.033006] ENABLING IO-APIC IRQs [ 0.036259] init IO_APIC IRQs [ 0.040129] apic 0 pin 0 not connected [ 0.044485] IOAPIC[0]: Set routing entry (0-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:0) [ 0.048352] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-5 -> 0xef -> IRQ 5 Mode:1 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-10 -> 0xef -> IRQ 10 Mode:1 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-11 -> 0xef -> IRQ 11 Mode:1 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:0) [ 0.052000] IOAPIC[0]: Set routing entry (0-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:0) [ 0.052000] apic 0 pin 16 not connected [ 0.052000] apic 0 pin 17 not connected [ 0.052000] apic 0 pin 18 not connected [ 0.052000] apic 0 pin 19 not connected [ 0.052000] apic 0 pin 20 not connected [ 0.052000] apic 0 pin 21 not connected [ 0.052000] apic 0 pin 22 not connected [ 0.052000] apic 0 pin 23 not connected [ 0.052000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.052000] tsc: Detected 2260.998 MHz processor [ 0.052095] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=9043992) [ 0.056066] pid_max: default: 32768 minimum: 301 [ 0.067047] Security Framework initialized [ 0.068092] AppArmor: AppArmor disabled by boot time parameter [ 0.077556] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.088300] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.092395] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.096140] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.113464] CPU: Physical Processor ID: 0 [ 0.116155] mce: CPU supports 10 MCE banks [ 0.120425] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.124087] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.128037] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.275632] Freeing SMP alternatives memory: 72K [ 0.297814] smpboot: Max logical packages: 1 [ 0.300321] TSC deadline timer enabled [ 0.304000] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1) [ 0.310522] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.314397] Hierarchical SRCU implementation. [ 0.321207] NMI watchdog: Perf event create on CPU 0 failed with -2 [ 0.324097] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.331920] smp: Bringing up secondary CPUs ... [ 0.332168] smp: Brought up 1 node, 1 CPU [ 0.336204] ---------------- [ 0.340066] | NMI testsuite: [ 0.344065] -------------------- [ 0.348067] remote IPI: ok | [ 0.352087] local IPI: ok | [ 0.356098] -------------------- [ 0.360073] Good, all 2 testcases passed! | [ 0.364068] --------------------------------- [ 0.368069] smpboot: Total of 1 processors activated (4521.99 BogoMIPS) [ 0.381132] devtmpfs: initialized [ 0.387018] x86/mm: Memory block size: 128MB [ 0.470011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.472317] futex hash table entries: 256 (order: 3, 32768 bytes) [ 0.479959] xor: measuring software checksum speed [ 0.520066] prefetch64-sse: 1873.000 MB/sec [ 0.564098] generic_sse: 1663.000 MB/sec [ 0.568102] xor: using function: prefetch64-sse (1873.000 MB/sec) [ 0.591173] NET: Registered protocol family 16 [ 0.625202] audit: initializing netlink subsys (disabled) [ 0.636451] audit: type=2000 audit(1511167877.437:1): state=initialized audit_enabled=0 res=1 [ 0.648165] cpuidle: using governor ladder [ 0.652125] cpuidle: using governor menu [ 0.682789] ACPI: bus type PCI registered [ 0.684089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.690357] dca service started, version 1.12.1 [ 0.693295] PCI: Using configuration type 1 for base access [ 1.921416] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.016075] raid6: sse2x1 gen() 664 MB/s [ 2.088131] raid6: sse2x1 xor() 540 MB/s [ 2.160099] raid6: sse2x2 gen() 773 MB/s [ 2.232127] raid6: sse2x2 xor() 427 MB/s [ 2.304090] raid6: sse2x4 gen() 1114 MB/s [ 2.376099] raid6: sse2x4 xor() 749 MB/s [ 2.380123] raid6: using algorithm sse2x4 gen() 1114 MB/s [ 2.384134] raid6: .... xor() 749 MB/s, rmw enabled [ 2.388099] raid6: using ssse3x2 recovery algorithm [ 2.396322] ACPI: Added _OSI(Module Device) [ 2.400102] ACPI: Added _OSI(Processor Device) [ 2.404102] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.408125] ACPI: Added _OSI(Processor Aggregator Device) [ 2.465687] ACPI: Interpreter enabled [ 2.468611] ACPI: (supports S0 S3 S4 S5) [ 2.472071] ACPI: Using IOAPIC for interrupt routing [ 2.476996] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.488000] ACPI: Enabled 2 GPEs in block 00 to 0F [ 2.698460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.700194] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 2.704786] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 2.709161] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 2.740000] acpiphp: Slot [3] registered [ 2.745259] acpiphp: Slot [4] registered [ 2.748811] acpiphp: Slot [5] registered [ 2.752801] acpiphp: Slot [6] registered [ 2.756749] acpiphp: Slot [7] registered [ 2.760803] acpiphp: Slot [8] registered [ 2.764778] acpiphp: Slot [9] registered [ 2.768780] acpiphp: Slot [10] registered [ 2.772747] acpiphp: Slot [11] registered [ 2.776721] acpiphp: Slot [12] registered [ 2.780849] acpiphp: Slot [13] registered [ 2.784770] acpiphp: Slot [14] registered [ 2.789362] acpiphp: Slot [15] registered [ 2.793325] acpiphp: Slot [16] registered [ 2.797322] acpiphp: Slot [17] registered [ 2.801265] acpiphp: Slot [18] registered [ 2.805331] acpiphp: Slot [19] registered [ 2.809203] acpiphp: Slot [20] registered [ 2.813221] acpiphp: Slot [21] registered [ 2.817162] acpiphp: Slot [22] registered [ 2.821228] acpiphp: Slot [23] registered [ 2.825166] acpiphp: Slot [24] registered [ 2.829268] acpiphp: Slot [25] registered [ 2.833296] acpiphp: Slot [26] registered [ 2.837404] acpiphp: Slot [27] registered [ 2.841420] acpiphp: Slot [28] registered [ 2.845556] acpiphp: Slot [29] registered [ 2.850364] acpiphp: Slot [30] registered [ 2.853291] acpiphp: Slot [31] registered [ 2.856485] PCI host bridge to bus 0000:00 [ 2.860157] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.864160] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.868168] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.872155] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window] [ 2.876225] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.881255] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 2.892868] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 2.904267] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 2.940124] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f] [ 2.956227] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.960092] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.964093] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.968124] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.979629] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 2.986232] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 2.988293] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 2.999953] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 3.008129] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 3.028134] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 3.064227] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 3.076943] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 3.088128] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 3.100126] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 3.144075] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 3.154229] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 3.164068] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 3.176097] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 3.204070] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref] [ 3.226945] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 3.232069] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f] [ 3.298175] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 3.305687] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 3.313425] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 3.321367] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 3.326590] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 3.346300] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.348000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.348073] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.352066] vgaarb: loaded [ 3.364000] SCSI subsystem initialized [ 3.366453] libata version 3.00 loaded. [ 3.369812] ACPI: bus type USB registered [ 3.373428] usbcore: registered new interface driver usbfs [ 3.376585] usbcore: registered new interface driver hub [ 3.380579] usbcore: registered new device driver usb [ 3.386755] pps_core: LinuxPPS API ver. 1 registered [ 3.388068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.392320] PTP clock support registered [ 3.398524] EDAC MC: Ver: 3.0.0 [ 3.408589] dell_smbios: Unable to run on non-Dell system [ 3.416325] Advanced Linux Sound Architecture Driver Initialized. [ 3.421847] PCI: Using ACPI for IRQ routing [ 3.424124] PCI: pci_cache_line_size set to 64 bytes [ 3.429915] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 3.432197] e820: reserve RAM buffer [mem 0x3ffde000-0x3fffffff] [ 3.446171] Bluetooth: Core ver 2.22 [ 3.448771] NET: Registered protocol family 31 [ 3.452134] Bluetooth: HCI device and connection manager initialized [ 3.456430] Bluetooth: HCI socket layer initialized [ 3.460161] Bluetooth: L2CAP socket layer initialized [ 3.464581] Bluetooth: SCO socket layer initialized [ 3.468482] NET: Registered protocol family 8 [ 3.472069] NET: Registered protocol family 20 [ 3.479795] nfc: nfc_init: NFC Core ver 0.1 [ 3.480932] NET: Registered protocol family 39 [ 3.516411] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 3.520090] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 3.534537] clocksource: Switched to clocksource kvm-clock [ 6.167289] VFS: Disk quotas dquot_6.6.0 [ 6.175004] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.186053] FS-Cache: Loaded [ 6.193313] CacheFiles: Loaded [ 6.198750] pnp: PnP ACPI init [ 6.205466] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.218332] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 6.233600] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 6.246244] pnp 00:03: [dma 2] [ 6.253489] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 6.265166] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 6.275987] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.287491] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.306674] pnp: PnP ACPI: found 7 devices [ 6.451919] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 6.468480] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 6.478851] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 6.489023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 6.499614] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window] [ 6.513385] NET: Registered protocol family 2 [ 6.531993] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 6.548591] TCP bind hash table entries: 8192 (order: 7, 720896 bytes) [ 6.566545] TCP: Hash tables configured (established 8192 bind 8192) [ 6.580937] UDP hash table entries: 512 (order: 4, 98304 bytes) [ 6.589952] UDP-Lite hash table entries: 512 (order: 4, 98304 bytes) [ 6.602323] NET: Registered protocol family 1 [ 6.621674] RPC: Registered named UNIX socket transport module. [ 6.634212] RPC: Registered udp transport module. [ 6.643292] RPC: Registered tcp transport module. [ 6.652216] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.664460] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.676000] cfg80211: Problem loading in-kernel X.509 certificate (-19) [ 6.688473] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.704773] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 6.704939] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 6.705133] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 6.705619] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 6.705981] PCI: CLS 0 bytes, default 64 [ 6.710806] Trying to unpack rootfs image as initramfs... [ 6.840773] cfg80211: failed to load regulatory.db [ 19.905384] Freeing initrd memory: 7920K [ 19.959402] kvm: no hardware support [ 19.968279] has_svm: not amd [ 19.975766] kvm: no hardware support [ 19.987483] Machine check injector initialized [ 20.017067] cryptomgr_test (34) used greatest stack depth: 14912 bytes left [ 20.038409] cryptomgr_test (36) used greatest stack depth: 14792 bytes left [ 20.101829] Kprobe smoke test: started [ 21.211799] Kprobe smoke test: passed successfully [ 21.226510] Initialise system trusted keyrings [ 21.234964] workingset: timestamp_bits=56 max_order=18 bucket_order=0 [ 21.256322] DLM installed [ 21.264320] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 21.290050] FS-Cache: Netfs 'nfs' registered for caching [ 21.310404] NFS: Registering the id_resolver key type [ 21.322521] Key type id_resolver registered [ 21.332858] Key type id_legacy registered [ 21.342775] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 21.358499] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.387859] FS-Cache: Netfs 'cifs' registered for caching [ 21.404484] Key type cifs.spnego registered [ 21.412874] Key type cifs.idmap registered [ 21.421110] ntfs: driver 2.1.32 [Flags: R/W]. [ 21.430661] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 21.456589] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 21.466189] QNX4 filesystem 0.2.3 registered. [ 21.476975] fuse init (API version 7.26) [ 21.490623] JFS: nTxBlock = 7390, nTxLock = 59124 [ 21.539839] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 21.572346] 9p: Installing v9fs 9p2000 file system support [ 21.582650] FS-Cache: Netfs '9p' registered for caching [ 21.593382] NILFS version 2 loaded [ 21.600505] befs: version: 0.9.3 [ 21.609484] ocfs2: Registered cluster interface o2cb [ 21.621131] ocfs2: Registered cluster interface user [ 21.633671] OCFS2 User DLM kernel interface loaded [ 21.694789] gfs2: GFS2 installed [ 21.703187] ceph: loaded (mds proto 32) [ 21.898360] NET: Registered protocol family 38 [ 21.911125] async_tx: api initialized (async) [ 21.920553] Key type asymmetric registered [ 21.929046] Asymmetric key parser 'x509' registered [ 21.939679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 21.953808] io scheduler noop registered [ 21.961803] io scheduler deadline registered [ 21.970946] io scheduler cfq registered (default) [ 21.979954] io scheduler mq-deadline registered [ 21.988672] io scheduler kyber registered [ 22.010802] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 22.028566] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 22.039577] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 22.052287] cpcihp_generic: not configured, disabling. [ 22.060936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.123582] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 22.139232] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 22.153785] vmlfb: initializing [ 22.160165] Could not find Carillo Ranch MCH device. [ 22.169562] no IO addresses supplied [ 22.177531] hgafb: HGA card not detected. [ 22.185571] hgafb: probe of hgafb.0 failed with error -22 [ 22.199782] usbcore: registered new interface driver udlfb [ 22.237606] v86d (127) used greatest stack depth: 14176 bytes left [ 27.360631] uvesafb: Getting VBE info block failed (eax=0x4f00, err=1) [ 27.373916] uvesafb: vbe_init() failed with -22 [ 27.383567] uvesafb: probe of uvesafb.0 failed with error -22 [ 27.396597] intel_idle: Please enable MWAIT in BIOS SETUP [ 27.420968] ipmi message handler version 39.2 [ 27.429163] ipmi device interface [ 27.435769] IPMI System Interface driver. [ 27.446115] ipmi_si: Unable to find any System Interface(s) [ 27.454474] IPMI Watchdog: driver initialized [ 27.460791] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 27.483666] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 27.501949] ACPI: Power Button [PWRF] [ 27.525575] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 30.678753] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 30.710804] HDLC line discipline maxframe=4096 [ 30.720168] N_HDLC line discipline registered. [ 30.728786] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 30.736332] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 30.820143] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 30.900400] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 30.942273] Cyclades driver 2.6 [ 30.951578] MOXA Intellio family driver version 6.0k [ 30.963195] MOXA Smartio/Industio family driver version 2.0.5 [ 30.972470] Initializing Nozomi driver 2.1d [ 30.980237] RocketPort device driver module, version 2.09, 12-June-2003 [ 30.990738] No rocketport ports found; unloading driver [ 30.998518] SyncLink GT [ 31.002898] SyncLink GT, tty major#242 [ 31.009537] SyncLink GT no devices found [ 31.015795] SyncLink MultiPort driver $Revision: 4.38 $ [ 31.228877] SyncLink MultiPort driver $Revision: 4.38 $, tty major#241 [ 31.237814] SyncLink serial driver $Revision: 4.38 $ [ 31.456753] SyncLink serial driver $Revision: 4.38 $, tty major#240 [ 31.475192] lp: driver loaded but no devices found [ 31.483910] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 31.497644] ac.o: No PCI boards found. [ 31.506069] ac.o: For an ISA board you must supply memory and irq parameters. [ 31.525975] Non-volatile memory driver v1.3 [ 31.544764] ppdev: user-space parallel port driver [ 31.647233] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 31.654788] smapi::smapi_init, ERROR invalid usSmapiID [ 31.662108] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 31.674578] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 31.687161] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 31.699242] Linux agpgart interface v0.103 [ 31.715216] SyncLink PC Card driver $Revision: 4.34 $, tty major#238 [ 31.729639] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 31.752297] [drm] radeon kernel modesetting enabled. [ 31.768335] parport_pc 00:04: reported by Plug and Play ACPI [ 31.783244] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 31.910586] lp0: using parport0 (interrupt-driven). [ 32.051104] Floppy drive(s): fd0 is 2.88M AMI BIOS [ 32.128846] FDC 0 is a S82078B [ 32.191561] brd: module loaded [ 32.339301] loop: module loaded [ 32.349479] MM: desc_per_page = 128 [ 32.619886] rbd: loaded [ 32.624884] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 32.635807] lkdtm: No crash points registered, enable through debugfs [ 32.645522] Phantom Linux Driver, version n0.9.8, init OK [ 32.656342] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 32.668401] c2port c2port0: C2 port uc added [ 32.676216] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 32.702383] Uniform Multi-Platform E-IDE driver [ 32.714559] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 32.727917] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 32.742074] ide0: BM-DMA at 0xc080-0xc087 [ 32.748432] ide1: BM-DMA at 0xc088-0xc08f [ 32.754753] Probing IDE interface ide0... [ 33.370454] Probing IDE interface ide1... [ 34.168959] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 34.898456] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 34.913065] hdc: MWDMA2 mode selected [ 34.924801] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 34.936596] ide1 at 0x170-0x177,0x376 on irq 15 [ 34.959731] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 34.979949] ide-gd driver 1.18 [ 34.988187] ide-cd driver 5.00 [ 35.000861] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache [ 35.027489] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 35.069678] Loading iSCSI transport class v2.0-870. [ 35.091142] rdac: device handler registered [ 35.103608] hp_sw: device handler registered [ 35.113470] emc: device handler registered [ 35.125010] alua: device handler registered [ 35.137001] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34 [ 35.145060] fnic: Successfully Initialized Trace Buffer [ 35.153522] fnic: Successfully Initialized FC_CTLR Trace Buffer [ 35.166130] bnx2fc: QLogic FCoE Driver bnx2fc v2.11.8 (October 15, 2015) [ 35.180870] iscsi: registered transport (tcp) [ 35.188815] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 35.196332] Detecting Adaptec I2O RAID controllers... [ 35.205010] Adaptec aacraid driver 1.2.1[50834]-custom [ 35.212727] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 35.223323] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 35.238034] scsi: Detection failed (no card) [ 35.246237] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.02-k. [ 35.265582] iscsi: registered transport (qla4xxx) [ 35.276918] QLogic iSCSI HBA Driver [ 35.285050] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.1 [ 35.307668] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 35.325588] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 35.340853] megasas: 07.703.05.00-rc1 [ 35.350289] mpt3sas version 17.100.00.00 loaded [ 35.366650] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 35.381821] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 35.396899] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 35.413389] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 35.430600] ppa: Version 2.07 (for Linux 2.4.x) [ 35.453166] imm: Version 2.05 (for Linux 2.4.0) [ 35.473613] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017) [ 35.490533] RocketRAID 3xxx/4xxx Controller driver v1.10.0 [ 35.502886] stex: Promise SuperTrak EX Driver version: 6.02.0000.01 [ 35.518633] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 35.537850] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) [ 35.551199] iscsi: registered transport (cxgb3i) [ 35.561215] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 35.573010] iscsi: registered transport (cxgb4i) [ 35.580237] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 35.590616] iscsi: registered transport (bnx2i) [ 35.599966] iscsi: registered transport (be2iscsi) [ 35.607163] In beiscsi_module_init, tt=ffffffffb8286fc0 [ 35.618335] VMware PVSCSI driver - version 1.0.7.0-k [ 35.626246] hv_vmbus: registering driver hv_storvsc [ 35.633661] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 35.642960] osst :I: Tape driver with OnStream support version 0.99.4 [ 35.642960] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 35.663279] SCSI Media Changer driver v0.25 [ 35.671029] osd: LOADED open-osd 0.2.1 [ 35.724830] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 35.755891] SSFDC read-only Flash Translation layer [ 35.764442] mtdoops: mtd device (mtddev=name/number) must be supplied [ 35.774091] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 35.785181] slram: not enough parameters. [ 35.793603] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 35.808574] pmc551: not detected [ 35.835053] ftl_cs: FTL header not found. [ 35.890694] No valid DiskOnChip devices found [ 35.897369] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.910137] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.922516] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.934957] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.947235] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.963682] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 35.979470] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 35.987956] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 35.994444] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16 [ 36.006490] flash size: 128 MiB [ 36.011394] page size: 512 bytes [ 36.016314] OOB area size: 16 bytes [ 36.021504] sector size: 16 KiB [ 36.026328] pages number: 262144 [ 36.031260] pages per sector: 32 [ 36.036248] bus width: 8 [ 36.042405] bits in sector size: 14 [ 36.048982] bits in page size: 9 [ 36.053944] bits in OOB size: 4 [ 36.058740] flash size with OOB: 135168 KiB [ 36.064761] page address bytes: 4 [ 36.069724] sector address bytes: 3 [ 36.074936] options: 0x42 [ 36.089067] Scanning device for bad blocks [ 36.319271] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 36.328637] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 36.445081] ftl_cs: FTL header not found. [ 36.700247] parport0: AVR Butterfly [ 36.710070] parport0: cannot grant exclusive access for device spi-lm70llp [ 36.724203] spi_lm70llp: spi_lm70llp probe fail, status -12 [ 36.736224] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 36.788429] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 36.863059] tun: Universal TUN/TAP device driver, 1.6 [ 36.872489] arcnet: arcnet loaded [ 36.877678] arcnet:rfc1201: RFC1201 "standard" (`a') encapsulation support loaded [ 36.888300] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded [ 36.902851] arcnet:arc_rawmode: raw mode (`r') encapsulation support loaded [ 36.916885] arcnet:capmode: cap mode (`c') encapsulation support loaded [ 36.929973] arcnet:com90xx: COM90xx chipset support [ 37.265358] S3: No ARCnet cards found. [ 37.275248] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 37.293162] arcnet:com90io: E-mail me if you actually test this driver, please! [ 37.310371] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address! [ 37.328918] arcnet:arc_rimi: RIM I (entirely mem-mapped) support [ 37.337246] arcnet:arc_rimi: E-mail me if you actually test the RIM I driver, please! [ 37.348190] arcnet:arc_rimi: Given: node 00h, shmem 0h, irq 0 [ 37.356204] arcnet:arc_rimi: No autoprobe for RIM I; you must specify the shmem and irq! [ 37.367220] arcnet:com20020_pci: COM20020 PCI support [ 37.375416] ipddp.c:v0.01 8/28/97 Bradford W. Johnson [ 37.392491] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson [ 37.410555] vcan: Virtual CAN interface driver [ 37.501268] slcan: serial line CAN interface driver [ 37.508201] slcan: 10 dynamic interface channels. [ 37.514934] CAN device driver interface [ 37.521392] usbcore: registered new interface driver ems_usb [ 37.529586] usbcore: registered new interface driver esd_usb2 [ 37.538170] sja1000 CAN netdevice driver [ 37.550938] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 37.566432] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 37.578184] Copyright (c) 2007 Atheros Corporation. [ 37.593414] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 37.608774] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10) [ 37.635987] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 37.655096] enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.45 [ 37.668843] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 37.681060] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 37.681060] http://www.scyld.com/network/drivers.html [ 37.698972] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 37.717453] vxge: Copyright(c) 2002-2010 Exar Corp. [ 37.724902] vxge: Driver version: 2.5.3.22640-k [ 37.732642] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 37.745540] e100: Copyright(c) 1999-2006 Intel Corporation [ 37.760198] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 37.775429] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 41.717380] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 42.844458] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 42.860465] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 42.875212] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 42.886811] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 42.899551] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 42.913187] igb: Copyright (c) 2007-2014 Intel Corporation. [ 42.925631] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 42.941313] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 42.954092] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 42.969540] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 42.985676] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k [ 43.003990] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation. [ 43.020394] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 43.034491] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 43.046866] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 43.060616] sky2: driver version 1.30 [ 43.077231] myri10ge: Version 1.5.3-1.534 [ 43.088030] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 43.105653] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.66 [ 43.120755] QLogic/NetXen Network Driver v4.0.82 [ 43.132967] atp.c:v1.09=ac 2002/10/01 Donald Becker [ 43.151021] Solarflare NET driver v4.1 [ 43.181999] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 43.192016] tehuti: Options: hw_csum [ 43.198050] tlan: ThunderLAN driver v1.17 [ 43.204367] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 43.214987] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 43.222030] AX.25: 6pack driver, Revision: 0.3.0 [ 43.228570] YAM driver version 0.8 by F1OAT/F6FBB [ 43.249402] AX.25: bpqether driver version 004 [ 43.259583] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 43.259583] baycom_ser_fdx: version 0.10 [ 43.305558] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 43.317325] hdlcdrv: version 0.8 [ 43.324779] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 43.324779] baycom_ser_hdx: version 0.10 [ 43.370422] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 43.370422] baycom_par: version 0.9 [ 43.418883] NET3 PLIP version 2.4-parport gniibe@mri.co.jp [ 43.426654] plip0: Parallel port at 0x378, using IRQ 7. [ 43.434044] PPP generic driver version 2.4.2 [ 43.444579] PPP BSD Compression module registered [ 43.451350] PPP Deflate Compression module registered [ 43.458420] PPP MPPE Compression module registered [ 43.465123] NET: Registered protocol family 24 [ 43.471610] PPTP driver version 0.8.5 [ 43.479087] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 43.493249] CSLIP: code copyright 1989 Regents of the University of California. [ 43.513147] SLIP linefill/keepalive option. [ 43.524740] hdlc: HDLC support module revision 1.22 [ 43.533914] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 43.546291] usbcore: registered new interface driver ath9k_htc [ 43.555489] usbcore: registered new interface driver carl9170 [ 43.565050] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 43.574544] usbcore: registered new interface driver at76c50x-usb [ 43.584662] Broadcom 43xx driver loaded [ Features: PNLS ] [ 43.593406] Broadcom 43xx-legacy driver loaded [ Features: PLID ] [ 43.603548] airo(): Probing for PCI adapters [ 43.611009] airo(): Finished probing for PCI adapters [ 43.619071] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 43.630023] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 43.639197] libipw: 802.11 data/management/control stack, git-1.1.13 [ 43.651157] libipw: Copyright (C) 2004-2005 Intel Corporation [ 43.668424] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 43.682921] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 43.695777] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 43.709813] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 43.718662] iwl3945: hw_scan is disabled [ 43.726173] Intel(R) Wireless WiFi driver for Linux [ 43.734081] Copyright(c) 2003- 2015 Intel Corporation [ 43.744555] orinoco 0.15 (David Gibson , Pavel Roskin , et al) [ 43.759682] orinoco_plx 0.15 (Pavel Roskin , David Gibson , Daniel Barlow ) [ 43.776639] orinoco_tmd 0.15 (Joerg Dorchain ) [ 43.785355] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger ) [ 43.797844] usbcore: registered new interface driver orinoco_usb [ 43.806670] usbcore: registered new interface driver p54usb [ 43.815547] usbcore: registered new interface driver usb8xxx [ 43.823559] libertas_sdio: Libertas SDIO driver [ 43.832211] libertas_sdio: Copyright Pierre Ossman [ 43.841215] libertas_spi: Libertas SPI driver [ 43.850395] usbcore: registered new interface driver lbtf_usb [ 43.863614] usbcore: registered new interface driver rt2500usb [ 43.873336] usbcore: registered new interface driver rt73usb [ 43.882638] usbcore: registered new interface driver rt2800usb [ 43.893032] usbcore: registered new interface driver rtl8187 [ 43.903239] usbcore: registered new interface driver rtl8192cu [ 43.917111] usbcore: registered new interface driver zd1211rw [ 43.926932] usbcore: registered new interface driver zd1201 [ 43.937304] usbcore: registered new interface driver rndis_wlan [ 43.953900] mac80211_hwsim: initializing netlink [ 43.972434] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 43.995799] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 44.016601] usbcore: registered new interface driver i2400m_usb [ 44.026940] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [ 44.037210] usbcore: registered new interface driver catc [ 44.045112] usbcore: registered new interface driver kaweth [ 44.052932] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 44.063753] usbcore: registered new interface driver pegasus [ 44.071886] usbcore: registered new interface driver rtl8150 [ 44.079597] hso: drivers/net/usb/hso.c: Option Wireless [ 44.089509] usbcore: registered new interface driver hso [ 44.097418] usbcore: registered new interface driver asix [ 44.105237] usbcore: registered new interface driver ax88179_178a [ 44.114309] usbcore: registered new interface driver cdc_ether [ 44.122792] usbcore: registered new interface driver cdc_eem [ 44.130898] usbcore: registered new interface driver dm9601 [ 44.139061] usbcore: registered new interface driver smsc75xx [ 44.147354] usbcore: registered new interface driver smsc95xx [ 44.155592] usbcore: registered new interface driver gl620a [ 44.163593] usbcore: registered new interface driver net1080 [ 44.171796] usbcore: registered new interface driver plusb [ 44.179862] usbcore: registered new interface driver rndis_host [ 44.188415] usbcore: registered new interface driver cdc_subset [ 44.196907] usbcore: registered new interface driver zaurus [ 44.204861] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 44.215351] usbcore: registered new interface driver int51x1 [ 44.223516] usbcore: registered new interface driver cdc_phonet [ 44.232336] usbcore: registered new interface driver kalmia [ 44.240496] usbcore: registered new interface driver ipheth [ 44.249531] usbcore: registered new interface driver sierra_net [ 44.262848] usbcore: registered new interface driver cx82310_eth [ 44.276462] usbcore: registered new interface driver cdc_ncm [ 44.288808] usbcore: registered new interface driver lg-vl600 [ 44.300547] hv_vmbus: registering driver hv_netvsc [ 44.312401] Madge ATM Ambassador driver version 1.2.4 [ 44.323972] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 44.337515] fore200e: FORE Systems 200E-series ATM driver - version 0.3e [ 44.352395] idt77252_init: at ffffffffb90e7a51 [ 44.362671] Solos PCI Driver Version 1.04 [ 44.372351] adummy: version 1.0 [ 44.383564] Fusion MPT base driver 3.04.20 [ 44.389594] Copyright (c) 1999-2008 LSI Corporation [ 44.397472] Fusion MPT SPI Host driver 3.04.20 [ 44.405598] Fusion MPT FC Host driver 3.04.20 [ 44.413577] Fusion MPT SAS Host driver 3.04.20 [ 44.421553] Fusion MPT misc device (ioctl) driver 3.04.20 [ 44.431563] mptctl: Registered with Fusion MPT base driver [ 44.442189] mptctl: /dev/mptctl @ (major,minor=10,220) [ 44.453116] Fusion MPT LAN driver 3.04.20 [ 44.500507] aoe: AoE v85 initialised. [ 44.512661] usbcore: registered new interface driver hwa-rc [ 44.521280] usbcore: registered new interface driver i1480-dfu-usb [ 44.613397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 44.632325] ehci-pci: EHCI PCI platform driver [ 44.643506] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 44.656952] ohci-pci: OHCI PCI platform driver [ 44.669485] uhci_hcd: USB Universal Host Controller Interface driver [ 44.685338] driver u132_hcd [ 44.693243] usbcore: registered new interface driver hwa-hc [ 44.706237] usbcore: registered new interface driver wusb-cbaf [ 44.719819] usbcore: registered new interface driver cdc_acm [ 44.731426] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 44.748664] usbcore: registered new interface driver usblp [ 44.761100] usbcore: registered new interface driver cdc_wdm [ 44.773320] usbcore: registered new interface driver usbtmc [ 44.785927] usbcore: registered new interface driver uas [ 44.799985] usbcore: registered new interface driver usb-storage [ 44.810487] usbcore: registered new interface driver ums-alauda [ 44.819298] usbcore: registered new interface driver ums-cypress [ 44.828532] usbcore: registered new interface driver ums-datafab [ 44.838285] usbcore: registered new interface driver ums_eneub6250 [ 44.847559] usbcore: registered new interface driver ums-freecom [ 44.856404] usbcore: registered new interface driver ums-isd200 [ 44.866002] usbcore: registered new interface driver ums-jumpshot [ 44.878023] usbcore: registered new interface driver ums-karma [ 44.886509] usbcore: registered new interface driver ums-onetouch [ 44.895645] usbcore: registered new interface driver ums-realtek [ 44.904462] usbcore: registered new interface driver ums-sddr09 [ 44.913379] usbcore: registered new interface driver ums-sddr55 [ 44.925560] usbcore: registered new interface driver ums-usbat [ 44.938722] usbcore: registered new interface driver mdc800 [ 44.950477] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 44.967400] usbcore: registered new interface driver microtekX6 [ 44.982563] usbcore: registered new interface driver usbserial_generic [ 44.997534] usbserial: USB Serial support registered for generic [ 45.010923] usbcore: registered new interface driver aircable [ 45.023811] usbserial: USB Serial support registered for aircable [ 45.037523] usbcore: registered new interface driver ark3116 [ 45.050225] usbserial: USB Serial support registered for ark3116 [ 45.063938] usbcore: registered new interface driver belkin_sa [ 45.077318] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 45.096662] usbcore: registered new interface driver ch341 [ 45.109244] usbserial: USB Serial support registered for ch341-uart [ 45.123040] usbcore: registered new interface driver cp210x [ 45.135944] usbserial: USB Serial support registered for cp210x [ 45.145210] usbcore: registered new interface driver cyberjack [ 45.155509] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 45.174215] usbcore: registered new interface driver cypress_m8 [ 45.187596] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 45.203673] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 45.219040] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 45.233165] usbcore: registered new interface driver usb_debug [ 45.246001] usbserial: USB Serial support registered for debug [ 45.259123] usbserial: USB Serial support registered for xhci_dbc [ 45.272962] usbcore: registered new interface driver digi_acceleport [ 45.286249] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 45.302584] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 45.317172] usbcore: registered new interface driver io_edgeport [ 45.326112] usbserial: USB Serial support registered for Edgeport 2 port adapter [ 45.339466] usbserial: USB Serial support registered for Edgeport 4 port adapter [ 45.353495] usbserial: USB Serial support registered for Edgeport 8 port adapter [ 45.366755] usbserial: USB Serial support registered for EPiC device [ 45.378490] usbcore: registered new interface driver io_ti [ 45.388634] usbserial: USB Serial support registered for Edgeport TI 1 port adapter [ 45.403278] usbserial: USB Serial support registered for Edgeport TI 2 port adapter [ 45.416821] usbcore: registered new interface driver empeg [ 45.427291] usbserial: USB Serial support registered for empeg [ 45.438372] usbcore: registered new interface driver ftdi_sio [ 45.449100] usbserial: USB Serial support registered for FTDI USB Serial Device [ 45.462158] usbcore: registered new interface driver garmin_gps [ 45.473222] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 45.485444] usbcore: registered new interface driver ipaq [ 45.495336] usbserial: USB Serial support registered for PocketPC PDA [ 45.506569] usbcore: registered new interface driver ipw [ 45.516382] usbserial: USB Serial support registered for IPWireless converter [ 45.529288] usbcore: registered new interface driver ir_usb [ 45.539010] usbserial: USB Serial support registered for IR Dongle [ 45.549824] usbcore: registered new interface driver iuu_phoenix [ 45.559422] usbserial: USB Serial support registered for iuu_phoenix [ 45.571408] usbcore: registered new interface driver keyspan [ 45.584880] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 45.600858] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 45.611122] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 45.621366] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 45.631832] usbcore: registered new interface driver keyspan_pda [ 45.641910] usbserial: USB Serial support registered for Keyspan PDA [ 45.651666] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) [ 45.664625] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration) [ 45.679503] usbcore: registered new interface driver kl5kusb105 [ 45.688548] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 45.700627] usbcore: registered new interface driver kobil_sct [ 45.709153] usbserial: USB Serial support registered for KOBIL USB smart card terminal [ 45.726962] usbcore: registered new interface driver mct_u232 [ 45.751380] usbserial: USB Serial support registered for MCT U232 [ 45.760545] usbcore: registered new interface driver mos7720 [ 45.768915] usbserial: USB Serial support registered for Moschip 2 port adapter [ 45.779771] usbcore: registered new interface driver mos7840 [ 45.788387] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 45.800542] usbcore: registered new interface driver navman [ 45.809490] usbserial: USB Serial support registered for navman [ 45.821508] usbcore: registered new interface driver omninet [ 45.829871] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 45.841659] usbcore: registered new interface driver opticon [ 45.850062] usbserial: USB Serial support registered for opticon [ 45.858936] usbcore: registered new interface driver option [ 45.867299] usbserial: USB Serial support registered for GSM modem (1-port) [ 45.877536] usbcore: registered new interface driver oti6858 [ 45.885901] usbserial: USB Serial support registered for oti6858 [ 45.894878] usbcore: registered new interface driver pl2303 [ 45.903231] usbserial: USB Serial support registered for pl2303 [ 45.912245] usbcore: registered new interface driver qcaux [ 45.920770] usbserial: USB Serial support registered for qcaux [ 45.933496] usbcore: registered new interface driver qcserial [ 45.946141] usbserial: USB Serial support registered for Qualcomm USB modem [ 45.957095] usbcore: registered new interface driver safe_serial [ 45.967675] usbserial: USB Serial support registered for safe_serial [ 45.976794] usbcore: registered new interface driver sierra [ 45.984800] usbserial: USB Serial support registered for Sierra USB modem [ 45.996432] usbcore: registered new interface driver spcp8x5 [ 46.004438] usbserial: USB Serial support registered for SPCP8x5 [ 46.012904] usbcore: registered new interface driver ssu100 [ 46.024890] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 46.043330] usbcore: registered new interface driver symbolserial [ 46.056553] usbserial: USB Serial support registered for symbol [ 46.068968] usbcore: registered new interface driver ti_usb_3410_5052 [ 46.081932] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 46.093630] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 46.105003] usbcore: registered new interface driver visor [ 46.113917] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 46.126809] usbserial: USB Serial support registered for Sony Clie 5.0 [ 46.136560] usbserial: USB Serial support registered for Sony Clie 3.5 [ 46.146190] usbcore: registered new interface driver whiteheat [ 46.155000] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 46.168391] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 46.179565] usbcore: registered new interface driver adutux [ 46.190683] usbcore: registered new interface driver appledisplay [ 46.199499] usbcore: registered new interface driver cypress_cy7c63 [ 46.208566] usbcore: registered new interface driver cytherm [ 46.216775] usbcore: registered new interface driver emi26 - firmware loader [ 46.230576] usbcore: registered new interface driver emi62 - firmware loader [ 46.241496] ftdi_elan: driver ftdi-elan [ 46.248530] usbcore: registered new interface driver ftdi-elan [ 46.258313] usbcore: registered new interface driver idmouse [ 46.267839] usbcore: registered new interface driver iowarrior [ 46.280381] usbcore: registered new interface driver isight_firmware [ 46.294842] usbcore: registered new interface driver usblcd [ 46.307794] usbcore: registered new interface driver ldusb [ 46.320823] usbcore: registered new interface driver legousbtower [ 46.334894] usbcore: registered new interface driver rio500 [ 46.348307] usbcore: registered new interface driver usbtest [ 46.446866] usbcore: registered new interface driver trancevibrator [ 46.455808] usbcore: registered new interface driver uss720 [ 46.463493] uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 46.475542] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 46.485553] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 46.495380] uss720: If you just want to connect to a printer, use usblp instead [ 46.505680] usbcore: registered new interface driver usbsevseg [ 46.514103] usbcore: registered new interface driver yurex [ 46.522013] usbcore: registered new interface driver sisusb [ 46.529983] usbcore: registered new interface driver cxacru [ 46.537994] usbcore: registered new interface driver speedtch [ 46.546348] usbcore: registered new interface driver ueagle-atm [ 46.554422] xusbatm: malformed module parameters [ 46.565594] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 46.577361] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1 [ 46.587767] vhci_hcd: created sysfs vhci_hcd.0 [ 46.596807] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 46.606070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 46.616248] usb usb1: Product: USB/IP Virtual Host Controller [ 46.624217] usb usb1: Manufacturer: Linux 4.14.0-12891-gc8a0739 vhci_hcd [ 46.633427] usb usb1: SerialNumber: vhci_hcd.0 [ 46.646874] hub 1-0:1.0: USB hub found [ 46.653357] hub 1-0:1.0: 8 ports detected [ 46.671310] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 46.685340] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 [ 46.701996] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 46.743316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 46.757268] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 46.778541] usb usb2: Product: USB/IP Virtual Host Controller [ 46.791157] usb usb2: Manufacturer: Linux 4.14.0-12891-gc8a0739 vhci_hcd [ 46.805292] usb usb2: SerialNumber: vhci_hcd.0 [ 46.823436] hub 2-0:1.0: USB hub found [ 46.832999] hub 2-0:1.0: 8 ports detected [ 46.863044] usbcore: registered new device driver usbip-host [ 46.877497] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 46.906062] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 46.917408] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 46.935394] parport0: cannot grant exclusive access for device parkbd [ 46.951438] hv_vmbus: registering driver hyperv_keyboard [ 47.670757] mousedev: PS/2 mouse device common for all mice [ 47.703371] usbcore: registered new interface driver appletouch [ 47.716779] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 47.740446] usbcore: registered new interface driver bcm5974 [ 47.764945] usbcore: registered new interface driver iforce [ 47.793794] usbcore: registered new interface driver xpad [ 47.807043] parport0: cannot grant exclusive access for device walkera0701 [ 47.820855] walkera0701: failed to register parport device [ 47.833069] usbcore: registered new interface driver usb_acecad [ 47.846900] usbcore: registered new interface driver aiptek [ 47.873437] usbcore: registered new interface driver gtco [ 47.885106] usbcore: registered new interface driver hanwang [ 47.897226] usbcore: registered new interface driver kbtab [ 47.915471] mk712: device not present [ 47.924475] usbcore: registered new interface driver usbtouchscreen [ 47.944217] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 47.957668] usbcore: registered new interface driver ati_remote2 [ 47.971214] cm109: Keymap for Komunikate KIP1000 phone loaded [ 47.983825] usbcore: registered new interface driver cm109 [ 48.000318] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 48.019083] usbcore: registered new interface driver keyspan_remote [ 48.035219] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 48.053044] usbcore: registered new interface driver powermate [ 48.068304] usbcore: registered new interface driver yealink [ 48.082144] rtc_cmos 00:00: RTC can wake from S4 [ 48.099292] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 48.115734] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 48.138614] i2c /dev entries driver [ 48.151373] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 48.344873] usbcore: registered new interface driver i2c-diolan-u2c [ 48.357501] i2c-parport: adapter type unspecified [ 48.367385] i2c-parport-light: adapter type unspecified [ 48.379543] usbcore: registered new interface driver i2c-tiny-usb [ 48.392996] lirc_dev: IR Remote Control driver registered, major 499 [ 48.406212] IR NEC protocol handler initialized [ 48.415898] IR RC5(x/sz) protocol handler initialized [ 48.426337] IR RC6 protocol handler initialized [ 48.435833] IR JVC protocol handler initialized [ 48.445458] IR Sony protocol handler initialized [ 48.457348] IR SANYO protocol handler initialized [ 48.467230] IR Sharp protocol handler initialized [ 48.477147] IR MCE Keyboard/mouse protocol handler initialized [ 48.488948] IR LIRC bridge handler initialized [ 48.499774] IR XMP protocol handler initialized [ 48.509390] pps_ldisc: PPS line discipline registered [ 48.519765] pps_parport: parallel port PPS client [ 48.529682] parport0: cannot grant exclusive access for device pps_parport [ 48.543323] pps_parport: couldn't register with parport0 [ 48.554240] Driver for 1-wire Dallas network protocol. [ 48.568313] usbcore: registered new interface driver DS9490R [ 48.722855] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 49.388813] applesmc: supported laptop not found! [ 49.400482] applesmc: driver init failed (ret=-19)! [ 51.026456] pc87360: PC8736x not detected, module not inserted [ 51.397986] usbcore: registered new interface driver pcwd_usb [ 51.406153] acquirewdt: WDT driver for Acquire single board computer initialising [ 51.417779] acquirewdt: I/O address 0x0043 already in use [ 51.425467] acquirewdt: probe of acquirewdt failed with error -5 [ 51.434964] advantechwdt: WDT driver for Advantech single board computer initialising [ 51.455963] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 51.470520] alim7101_wdt: Steve Hill [ 51.482598] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 51.496669] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 51.513157] ib700wdt: WDT driver for IB700 single board computer initialising [ 51.530649] ib700wdt: START method I/O 443 is not available [ 51.543124] ib700wdt: probe of ib700wdt failed with error -5 [ 51.557661] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 51.575839] wafer5823wdt: I/O address 0x0443 already in use [ 51.588872] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 51.604495] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 51.618786] i6300ESB timer: probe of 0000:00:05.0 failed with error -16 [ 51.633979] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 51.647141] iTCO_vendor_support: vendor-support=0 [ 51.659153] it87_wdt: no device [ 51.668297] sc1200wdt: build 20020303 [ 51.677985] sc1200wdt: io parameter must be specified [ 51.689649] pc87413_wdt: Version 1.1 at io 0x2E [ 51.699369] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 51.712359] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 51.724609] sbc60xxwdt: I/O address 0x0443 already in use [ 51.742365] cpu5wdt: misc_register failed [ 51.750133] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 51.765495] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 51.778090] w83877f_wdt: I/O address 0x0443 already in use [ 51.789895] w83977f_wdt: driver v1.00 [ 51.798357] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 51.811939] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 51.824608] machzwd: no ZF-Logic found [ 51.832766] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 51.844365] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 51.859456] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 51.874974] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 51.894384] device-mapper: uevent: version 1.0.3 [ 51.908879] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 51.935549] device-mapper: multipath round-robin: version 1.2.0 loaded [ 51.948551] device-mapper: multipath queue-length: version 0.2.0 loaded [ 51.961222] device-mapper: multipath service-time: version 0.3.0 loaded [ 51.976803] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 51.988666] device-mapper: raid: Loading target version 1.13.0 [ 52.002375] Bluetooth: HCI UART driver ver 2.3 [ 52.011545] Bluetooth: HCI UART protocol H4 registered [ 52.020331] Bluetooth: HCI UART protocol BCSP registered [ 52.029083] Bluetooth: HCI UART protocol ATH3K registered [ 52.041498] usbcore: registered new interface driver bcm203x [ 52.051290] usbcore: registered new interface driver bpa10x [ 52.062299] usbcore: registered new interface driver bfusb [ 52.073835] usbcore: registered new interface driver btusb [ 52.081678] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 52.091595] usbcore: registered new interface driver ath3k [ 52.104010] CAPI 2.0 started up with major 68 (middleware) [ 52.111913] Modular ISDN core version 1.1.29 [ 52.122281] NET: Registered protocol family 34 [ 52.128936] DSP module 2.0 [ 52.133375] mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies. [ 52.153265] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 52.161887] 0 virtual devices registered [ 52.170764] b1pci: revision 1.1.2.2 [ 52.178416] b1: revision 1.1.2.2 [ 52.185638] b1dma: revision 1.1.2.3 [ 52.302636] b1pci: revision 1.1.2.2 [ 52.311447] t1pci: revision 1.1.2.2 [ 52.319485] c4: revision 1.1.2.2 [ 52.326451] mISDN: HFC-multi driver 2.03 [ 52.334484] usbcore: registered new interface driver HFC-S_USB [ 52.347326] AVM Fritz PCI driver Rev. 2.3 [ 52.357476] Sedlbauer Speedfax+ Driver Rev. 2.0 [ 52.369107] Infineon ISDN Driver Rev. 1.0 [ 52.380221] Winbond W6692 PCI driver Rev. 2.0 [ 52.388937] mISDNipac module version 2.0 [ 52.395134] mISDN: ISAR driver Rev. 2.1 [ 52.401317] gigaset: Driver for Gigaset 307x [ 52.407735] gigaset: Kernel CAPI interface [ 52.415513] usbcore: registered new interface driver usb_gigaset [ 52.424457] usb_gigaset: USB Driver for Gigaset 307x using M105 [ 52.433764] usbcore: registered new interface driver bas_gigaset [ 52.442412] bas_gigaset: USB Driver for Gigaset 307x [ 52.459356] sdhci: Secure Digital Host Controller Interface driver [ 52.470215] sdhci: Copyright(c) Pierre Ossman [ 52.478350] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 52.486549] wbsd: Copyright(c) Pierre Ossman [ 52.494448] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 52.500286] usbcore: registered new interface driver vub300 [ 52.517077] usbcore: registered new interface driver ushc [ 52.524466] sdhci-pltfm: SDHCI platform and OF driver helper [ 52.537612] leds_ss4200: no LED devices found [ 52.591770] iscsi: registered transport (iser) [ 52.601200] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 52.613936] No iBFT detected. [ 52.620874] hidraw: raw HID events driver (C) Jiri Kosina [ 52.649353] usbcore: registered new interface driver usbhid [ 52.657262] usbhid: USB HID core driver [ 52.664839] Zilog/Hauppauge IR driver initializing [ 52.674010] kworker/u2:0 (195) used greatest stack depth: 13696 bytes left [ 52.683997] initialization complete [ 52.690352] NET: Registered protocol family 23 [ 52.706519] IrCOMM protocol (Dag Brattli) [ 52.753148] usbcore: registered new interface driver irda-usb [ 52.762258] usbcore: registered new interface driver stir4200 [ 52.780271] usbcore: registered new interface driver mcs7780 [ 52.790931] usbcore: registered new interface driver kingsun-sir [ 52.801114] usbcore: registered new interface driver ksdazzle-sir [ 52.810342] usbcore: registered new interface driver ks959-sir [ 52.819096] usbcore: registered new interface driver prism2_usb [ 52.828196] usbcore: registered new interface driver r8712u [ 52.839159] input: Speakup as /devices/virtual/input/input5 [ 52.851864] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 52.863136] speakup 3.1.6: initialized [ 52.870039] synth name on entry is: (null) [ 52.878270] asus_wmi: Asus Management GUID not found [ 52.888579] asus_wmi: Management GUID not found [ 52.902278] asus_wmi: Management GUID not found [ 52.925582] compal_laptop: Motherboard not recognized (You could try the module's force-parameter) [ 52.944834] dell_wmi_aio: No known WMI GUID found [ 52.953130] acer_wmi: Acer Laptop ACPI-WMI Extras [ 52.960163] acer_wmi: No or unsupported WMI interface, unable to load [ 52.968879] acerhdf: Acer Aspire One Fan driver, v.0.7.0 [ 52.976394] acerhdf: unknown (unsupported) BIOS version QEMU/Standard PC (i440FX + PIIX, 1996)/1.10.2-1, please report, aborting! [ 52.999369] hdaps: supported laptop not found! [ 53.005980] hdaps: driver init failed (ret=-19)! [ 53.015093] fujitsu_laptop: driver 0.6.0 successfully loaded [ 53.028148] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI [ 53.043090] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 53.043179] hv_utils: Registering HyperV Utility Driver [ 53.064221] hv_vmbus: registering driver hv_util [ 53.198928] no UART detected at 0x1 [ 53.208618] MTVAP port 0x378 is busy [ 53.214749] snd_mtpav: probe of snd_mtpav failed with error -16 [ 53.226511] parport0: cannot grant exclusive access for device MTS64 [ 53.235939] snd_mts64: probe of snd_mts64.0 failed with error -5 [ 53.248475] parport0: cannot grant exclusive access for device portman [ 53.257623] snd_portman2x4: probe of snd_portman2x4.0 failed with error -5 [ 53.276026] Error: Driver 'pcspkr' is already registered, aborting... [ 53.305837] ASIHPI driver 4.14.03 [ 53.337434] usbcore: registered new interface driver snd-usb-audio [ 53.346374] usbcore: registered new interface driver snd-ua101 [ 53.354995] usbcore: registered new interface driver snd-usb-usx2y [ 53.365898] usbcore: registered new interface driver snd-usb-us122l [ 53.379825] usbcore: registered new interface driver snd-usb-caiaq [ 53.393721] usbcore: registered new interface driver snd-usb-6fire [ 53.409439] oprofile: using NMI timer interrupt. [ 53.416670] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 53.432515] drop_monitor: Initializing network drop monitor service [ 53.443114] NET: Registered protocol family 26 [ 53.450104] GACT probability on [ 53.455226] Mirror/redirect action on [ 53.461163] Simple TC action Loaded [ 53.470843] netem: version 1.3 [ 53.476613] u32 classifier [ 53.483368] Performance counters on [ 53.489226] input device check on [ 53.494758] Actions configured [ 53.500659] Netfilter messages via NETLINK v0.30. [ 53.509319] nf_conntrack version 0.5.0 (7680 buckets, 30720 max) [ 53.518975] ctnetlink v0.93: registering with nfnetlink. [ 53.537992] xt_time: kernel timezone is -0000 [ 53.544899] ip_set: protocol 6 [ 53.550082] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 53.560288] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 53.574803] IPVS: ipvs loaded. [ 53.579924] IPVS: [rr] scheduler registered. [ 53.586473] IPVS: [wrr] scheduler registered. [ 53.596743] IPVS: [lc] scheduler registered. [ 53.604293] IPVS: [wlc] scheduler registered. [ 53.614467] IPVS: [lblc] scheduler registered. [ 53.623157] IPVS: [lblcr] scheduler registered. [ 53.632841] IPVS: [dh] scheduler registered. [ 53.641918] IPVS: [sh] scheduler registered. [ 53.651225] IPVS: [sed] scheduler registered. [ 53.658800] IPVS: [nq] scheduler registered. [ 53.665316] IPVS: [sip] pe registered. [ 53.671794] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 53.683653] gre: GRE over IPv4 demultiplexor driver [ 53.690785] ip_gre: GRE over IPv4 tunneling driver [ 53.710878] ip_tables: (C) 2000-2006 Netfilter Core Team [ 53.723976] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 53.737942] arp_tables: arp_tables: (C) 2002 David S. Miller [ 53.748337] Initializing XFRM netlink socket [ 53.756797] NET: Registered protocol family 10 [ 53.793066] Segment Routing with IPv6 [ 53.803664] mip6: Mobile IPv6 [ 53.809132] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 53.819287] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 53.840965] NET: Registered protocol family 17 [ 53.848973] NET: Registered protocol family 15 [ 53.857878] Bridge firewalling registered [ 53.865175] Ebtables v2.0 registered [ 53.873398] NET: Registered protocol family 4 [ 53.881475] NET: Registered protocol family 5 [ 53.902987] NET: Registered protocol family 6 [ 53.943528] NET: Registered protocol family 11 [ 53.950527] NET: Registered protocol family 3 [ 53.956942] can: controller area network core (rev 20170425 abi 9) [ 53.966856] NET: Registered protocol family 29 [ 53.973343] can: raw protocol (rev 20170425) [ 53.979887] can: broadcast manager protocol (rev 20170425 t) [ 53.987666] can: netlink gateway (rev 20170425) max_hops=1 [ 53.997484] Bluetooth: RFCOMM TTY layer initialized [ 54.004577] Bluetooth: RFCOMM socket layer initialized [ 54.013298] Bluetooth: RFCOMM ver 1.11 [ 54.019030] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.026417] Bluetooth: BNEP filters: protocol multicast [ 54.034978] Bluetooth: BNEP socket layer initialized [ 54.044468] Bluetooth: CMTP (CAPI Emulation) ver 1.0 [ 54.053487] Bluetooth: CMTP socket layer initialized [ 54.060609] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 54.068872] Bluetooth: HIDP socket layer initialized [ 54.083581] RPC: Registered rdma transport module. [ 54.090591] RPC: Registered rdma backchannel transport module. [ 54.109872] NET: Registered protocol family 33 [ 54.117164] Key type rxrpc registered [ 54.122925] Key type rxrpc_s registered [ 54.129213] lec:lane_module_init: lec.c: initialized [ 54.136543] mpoa:atm_mpoa_init: mpc.c: initialized [ 54.145323] l2tp_core: L2TP core driver, V2.0 [ 54.163162] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 54.170130] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 54.178369] l2tp_netlink: L2TP netlink interface [ 54.185554] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 54.193985] l2tp_debugfs: L2TP debugfs support [ 54.200372] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 54.209440] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 54.221267] DECnet: Routing cache hash table of 512 buckets, 44Kbytes [ 54.232618] NET: Registered protocol family 12 [ 54.244345] NET: Registered protocol family 35 [ 54.255553] 8021q: 802.1Q VLAN Support v1.8 [ 54.282580] DCCP: Activated CCID 2 (TCP-like) [ 54.289452] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 54.310323] sctp: Hash tables configured (bind 32/46) [ 54.331679] lib80211: common routines for IEEE802.11 drivers [ 54.344740] lib80211_crypt: registered algorithm 'NULL' [ 54.356527] lib80211_crypt: registered algorithm 'WEP' [ 54.465415] lib80211_crypt: registered algorithm 'CCMP' [ 54.476795] lib80211_crypt: registered algorithm 'TKIP' [ 54.484272] tipc: Activated (version 2.0.0) [ 54.491315] NET: Registered protocol family 30 [ 54.504634] tipc: Started in single node mode [ 54.514349] 9pnet: Installing 9P2000 support [ 54.526382] NET: Registered protocol family 36 [ 54.539086] Key type dns_resolver registered [ 54.548837] Key type ceph registered [ 54.560633] libceph: loaded (mon/osd proto 15/24) [ 54.585479] batman_adv: B.A.T.M.A.N. advanced 2017.4 (compatibility version 15) loaded [ 54.604629] start plist test [ 54.638238] end plist test [ 54.681173] ... APIC ID: 00000000 (0) [ 54.684049] ... APIC VERSION: 01050014 [ 54.684049] 0000000000000000000000000000000000000000000000000000000000000000 [ 54.684049] 0000000000000000000000000000000000000000000000000000000000004000 [ 54.721534] number of MP IRQ sources: 15. [ 54.727500] number of IO-APIC #0 registers: 24. [ 54.736307] testing the IO APIC....................... [ 54.745418] IO APIC #0...... [ 54.750019] .... register #00: 00000000 [ 54.755851] ....... : physical APIC id: 00 [ 54.762138] ....... : Delivery Type: 0 [ 54.768163] ....... : LTS : 0 [ 54.774158] .... register #01: 00170011 [ 54.779955] ....... : max redirection entries: 17 [ 54.787257] ....... : PRQ implemented: 0 [ 54.793467] ....... : IO APIC version: 11 [ 54.799885] .... register #02: 00000000 [ 54.805598] ....... : arbitration: 00 [ 54.813440] .... IRQ redirection table: [ 54.820883] IOAPIC 0: [ 54.824996] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.836916] pin01, enabled , edge , high, V(29), IRR(0), S(0), physical, D(00), M(0) [ 54.849882] pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0) [ 54.863427] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.878107] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.892790] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.907500] pin06, enabled , edge , high, V(23), IRR(0), S(0), physical, D(00), M(0) [ 54.920725] pin07, enabled , edge , high, V(22), IRR(0), S(0), physical, D(00), M(0) [ 54.931482] pin08, enabled , edge , high, V(2A), IRR(0), S(0), physical, D(00), M(0) [ 54.942657] pin09, enabled , level, high, V(21), IRR(0), S(0), physical, D(00), M(0) [ 54.953391] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.965215] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 54.977821] pin0c, enabled , edge , high, V(28), IRR(0), S(0), physical, D(00), M(0) [ 54.990555] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.003353] pin0e, enabled , edge , high, V(26), IRR(0), S(0), physical, D(00), M(0) [ 55.016156] pin0f, enabled , edge , high, V(27), IRR(0), S(0), physical, D(00), M(0) [ 55.028855] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.039679] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.050443] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.061170] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.072669] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.083399] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.095132] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.106768] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 55.117523] IRQ to pin mappings: [ 55.122480] IRQ0 -> 0:2 [ 55.126662] IRQ1 -> 0:1 [ 55.130835] IRQ3 -> 0:3 [ 55.134958] IRQ4 -> 0:4 [ 55.140791] IRQ5 -> 0:5 [ 55.145816] IRQ6 -> 0:6 [ 55.150086] IRQ7 -> 0:7 [ 55.154210] IRQ8 -> 0:8 [ 55.158420] IRQ9 -> 0:9 [ 55.162566] IRQ10 -> 0:10 [ 55.166905] IRQ11 -> 0:11 [ 55.171252] IRQ12 -> 0:12 [ 55.175595] IRQ13 -> 0:13 [ 55.180000] IRQ14 -> 0:14 [ 55.184409] IRQ15 -> 0:15 [ 55.188820] .................................... done. [ 55.196501] sched_clock: Marking stable (55196040849, 0)->(66793636610, -11597595761) [ 55.214580] registered taskstats version 1 [ 55.220676] Loading compiled-in X.509 certificates [ 55.232333] kAFS: Red Hat AFS client v0.1 registering. [ 55.243777] FS-Cache: Netfs 'afs' registered for caching [ 55.254079] FS-Cache: Netfs 'afs' unregistered from caching [ 55.272839] kAFS: failed to register: -97 [ 55.423213] Btrfs loaded, crc32c=crc32c-intel [ 55.449519] console [netcon0] enabled [ 55.456188] netconsole: network logging started [ 55.463938] rtc_cmos 00:00: setting system clock to 2017-11-20 16:52:16 UTC (1511196736) [ 55.481209] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 55.503870] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 55.513101] 8021q: adding VLAN 0 to HW filter on device bond0 [ 55.534165] IP-Config: Failed to open ipddp0 [ 55.564609] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 55.603299] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 55.631843] 8021q: adding VLAN 0 to HW filter on device eth0 [ 55.646614] IP-Config: Failed to open plip0 [ 55.669044] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 55.690934] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 55.705013] IP-Config: Failed to open irlan0 [ 55.711333] IP-Config: Failed to open gretap0 [ 55.717841] IP-Config: Failed to open erspan0 [ 55.726653] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 55.748983] Sending DHCP requests ., OK [ 55.758419] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 [ 55.772648] IP-Config: Complete: [ 55.781067] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 [ 55.798959] host=vm-lkp-wsx03-yocto-x86_64-18, domain=, nis-domain=(none) [ 55.812180] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= nameserver0=10.0.2.3 [ 55.859492] ALSA device list: [ 55.865382] #0: Dummy 1 [ 55.872511] #1: Loopback 1 [ 55.880250] #2: Virtual MIDI Card 1 [ 56.095298] Freeing unused kernel memory: 4772K [ 56.102528] Write protecting the kernel read-only data: 49152k [ 56.120875] Freeing unused kernel memory: 472K [ 56.174252] Freeing unused kernel memory: 1216K [ 56.181796] rodata_test: all tests were successful /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found [ 56.464772] rc (222) used greatest stack depth: 13680 bytes left [ 56.520936] gfs2: path_lookup on /dev/root returned error -2 [ 56.545054] mount (228) used greatest stack depth: 13456 bytes left Starting udev [ 57.054956] udevd[240]: starting version 3.1.5 bootlogd: cannot allocate pseudo tty: No such file or directory Populating dev cache [ 71.670242] udevd (251) used greatest stack depth: 13008 bytes left Configuring network interfaces... done. Starting syslogd/klogd: done PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin Poky (Yocto Project Reference Distro) 2.1 vm-lkp-wsx03-yocto-x86_64-18 /dev/ttyS0 [ 77.360677] Kernel tests: Boot OK! [ 78.376945] /lkp/lkp/src/bin/run-lkp [ 79.460969] RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/0 [ 79.460969] job=/lkp/scheduled/vm-lkp-wsx03-yocto-x86_64-18/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-c8a0739b185d11d6e2ca7ad9f5835841d1cfc765-20171120-97995-o5usht-0.yaml [ 79.460969] run-job /lkp/scheduled/vm-lkp-wsx03-yocto-x86_64-18/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-c8a0739b185d11d6e2ca7ad9f5835841d1cfc765-20171120-97995-o5usht-0.yaml [ 79.460969] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-lkp-wsx03-yocto-x86_64-18/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-c8a0739b185d11d6e2ca7ad9f5835841d1cfc765-20171120-97995-o5usht-0.yaml&job_state=running -O /dev/null [ 80.864966] Seeding trinity based on x86_64-allyesdebian [ 91.375399] [ 91.380720] ====================================================== [ 91.394163] WARNING: possible circular locking dependency detected [ 91.407453] 4.14.0-12891-gc8a0739 #14 Not tainted [ 91.417852] ------------------------------------------------------ [ 91.431493] trinity/648 is trying to acquire lock: [ 91.442608] (misc_mtx){+.+.}, at: [] misc_seq_start+0x17/0x27 [ 91.583377] [ 91.583377] but task is already holding lock: [ 91.603418] (&p->lock){+.+.}, at: [] seq_read+0x3a/0x341 [ 91.613890] [ 91.613890] which lock already depends on the new lock. [ 91.613890] [ 91.627926] [ 91.627926] the existing dependency chain (in reverse order) is: [ 91.639723] [ 91.639723] -> #3 (&p->lock){+.+.}: [ 91.649763] __mutex_lock+0x83/0x3cc [ 91.657191] seq_read+0x3a/0x341 [ 91.665614] proc_reg_read+0x5a/0x71 [ 91.672805] do_loop_readv_writev+0x65/0x9b [ 91.682458] do_iter_read+0x83/0x9e [ 91.689986] vfs_readv+0x71/0x9f [ 91.696981] default_file_splice_read+0x20a/0x2a5 [ 91.706631] splice_direct_to_actor+0xc4/0x198 [ 91.714215] do_splice_direct+0x8e/0xa2 [ 91.722327] do_sendfile+0x172/0x22e [ 91.730159] SyS_sendfile64+0x85/0x94 [ 91.739616] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 91.749981] [ 91.749981] -> #2 (sb_writers){.+.+}: [ 91.761322] get_page_from_freelist+0x4e9/0xa18 [ 91.771794] [ 91.771794] -> #1 ((completion)&req.done){+.+.}: [ 91.787011] __wait_for_common+0x55/0x1fe [ 91.796573] devtmpfs_create_node+0x139/0x155 [ 91.806749] device_add+0x3b3/0x4ec [ 91.815072] device_create_groups_vargs+0x98/0xca [ 91.825957] device_create_with_groups+0x30/0x33 [ 91.836527] misc_register+0xb8/0x13f [ 91.845436] vga_arb_device_init+0x1f/0x219 [ 91.855096] do_one_initcall+0x89/0x129 [ 91.864269] kernel_init_freeable+0x1c0/0x241 [ 91.874443] kernel_init+0xa/0xf5 [ 91.882739] ret_from_fork+0x24/0x30 [ 91.891353] [ 91.891353] -> #0 (misc_mtx){+.+.}: [ 91.902179] lock_acquire+0x128/0x1ca [ 91.911192] __mutex_lock+0x83/0x3cc [ 91.919812] misc_seq_start+0x17/0x27 [ 91.929008] seq_read+0x14d/0x341 [ 91.937209] proc_reg_read+0x5a/0x71 [ 91.945795] __vfs_read+0x21/0x9f [ 91.954124] vfs_read+0xad/0xe2 [ 91.962029] SyS_read+0x50/0x7e [ 91.970173] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 91.977844] [ 91.977844] other info that might help us debug this: [ 91.977844] [ 91.988643] Chain exists of: [ 91.988643] misc_mtx --> sb_writers --> &p->lock [ 91.988643] [ 92.000927] Possible unsafe locking scenario: [ 92.000927] [ 92.009081] CPU0 CPU1 [ 92.015152] ---- ---- [ 92.021367] lock(&p->lock); [ 92.025806] lock(sb_writers); [ 92.033201] lock(&p->lock); [ 92.044927] lock(misc_mtx); [ 92.052352] [ 92.052352] *** DEADLOCK *** [ 92.052352] [ 92.066900] 1 lock held by trinity/648: [ 92.088647] #0: (&p->lock){+.+.}, at: [] seq_read+0x3a/0x341 [ 92.105431] [ 92.105431] stack backtrace: [ 92.117324] CPU: 0 PID: 648 Comm: trinity Not tainted 4.14.0-12891-gc8a0739 #14 [ 92.133653] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 92.151902] Call Trace: [ 92.158542] dump_stack+0x79/0xab [ 92.166772] print_circular_bug+0x2a1/0x2af [ 92.176535] check_prev_add+0x88/0x217 [ 92.185666] ? look_up_lock_class+0xa1/0x11f [ 92.195517] ? look_up_lock_class+0x11f/0x11f [ 92.205657] ? register_lock_class+0x5c/0x302 [ 92.215608] ? look_up_lock_class+0x11f/0x11f [ 92.225824] ? __lock_acquire+0xacc/0xd02 [ 92.235379] __lock_acquire+0xacc/0xd02 [ 92.244544] ? misc_seq_start+0x17/0x27 [ 92.253918] lock_acquire+0x128/0x1ca [ 92.262735] ? misc_seq_start+0x17/0x27 [ 92.271938] __mutex_lock+0x83/0x3cc [ 92.280484] ? misc_seq_start+0x17/0x27 [ 92.289659] ? misc_seq_start+0x17/0x27 [ 92.298867] ? rcu_read_lock_sched_held+0x54/0x5a [ 92.309588] ? kmem_cache_alloc_node_trace+0x196/0x237 [ 92.321089] ? kvmalloc_node+0x48/0x71 [ 92.330136] ? misc_seq_start+0x17/0x27 [ 92.339271] misc_seq_start+0x17/0x27 [ 92.348154] seq_read+0x14d/0x341 [ 92.356313] proc_reg_read+0x5a/0x71 [ 92.365128] __vfs_read+0x21/0x9f [ 92.373262] vfs_read+0xad/0xe2 [ 92.381178] SyS_read+0x50/0x7e [ 92.389117] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 92.399616] RIP: 0033:0x454d00 [ 92.407193] RSP: 002b:00007ffe38245f68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 92.424140] RAX: ffffffffffffffda RBX: 0000000000000046 RCX: 0000000000454d00 [ 92.439443] RDX: 0000000000000400 RSI: 00000000022c0440 RDI: 0000000000000004 [ 92.454869] RBP: 00000000004e2720 R08: 0000000001046108 R09: 0000000000000410 [ 92.470254] R10: 0000000000000020 R11: 0000000000000246 R12: 0000000000000000 [ 92.485615] R13: 00000000004b7c09 R14: 0000000000000001 R15: 00000000004b7c19 [ 148.722159] do_dccp_setsockopt: sockopt(CHANGE_L/R) is deprecated: fix your app [ 148.756602] kernel msg: ebtables bug: please report to author: Wrong len argument [ 148.773493] trinity-main uses obsolete (PF_INET,SOCK_PACKET) [ 338.725383] random: crng init done [ 387.181727] sysrq: SysRq : Emergency Sync [ 387.188462] Emergency Sync complete [ 387.204314] sysrq: SysRq : Resetting Elapsed time: 400 #!/bin/bash # To reproduce, # 1) save job-script and this script (both are attached in 0day report email) # 2) run this script with your compiled kernel and optional env $INSTALL_MOD_PATH kernel=$1 initrds=( /osimage/yocto/yocto-minimal-x86_64-2016-04-22.cgz /lkp/lkp/lkp-x86_64.cgz /osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-static-x86_64-x86_64-6ddabfd2_2017-11-10.cgz ) HTTP_PREFIX=https://github.com/0day-ci/lkp-qemu/raw/master wget --timestamping "${initrds[@]/#/$HTTP_PREFIX}" { cat "${initrds[@]//*\//}" [[ $INSTALL_MOD_PATH ]] && ( cd "$INSTALL_MOD_PATH" find lib | cpio -o -H newc --quiet | gzip ) echo job-script | cpio -o -H newc --quiet | gzip } > initrd.img qemu-img create -f qcow2 disk-vm-lkp-wsx03-yocto-x86_64-18-0 256G kvm=( qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel $kernel -initrd initrd.img -m 1024 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=disk-vm-lkp-wsx03-yocto-x86_64-18-0,media=disk,if=virtio -serial stdio -display none -monitor null ) append=( ip=::::vm-lkp-wsx03-yocto-x86_64-18::dhcp root=/dev/ram0 user=lkp job=/job-script ARCH=x86_64 kconfig=x86_64-allyesdebian branch=linus/master commit=c8a0739b185d11d6e2ca7ad9f5835841d1cfc765 BOOT_IMAGE=/pkg/linux/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/vmlinuz-4.14.0-12891-gc8a0739 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-allyesdebian/gcc-6/c8a0739b185d11d6e2ca7ad9f5835841d1cfc765/0 result_service=tmpfs debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw ) "${kvm[@]}" -append "${append[*]}"