linux-kernel - [PATCH AUTOSEL for 4.9 10/24] mmc: sdhci-msm: fix issue with power irq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171122222604.20122-10-alexander.levin@verizon.com>
Date:   Wed, 22 Nov 2017 22:26:12 +0000
From:   alexander.levin@...izon.com
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Cc:     Subhash Jadavani <subhashj@...eaurora.org>,
        Vijay Viswanath <vviswana@...eaurora.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        alexander.levin@...izon.com
Subject: [PATCH AUTOSEL for 4.9 10/24] mmc: sdhci-msm: fix issue with power
 irq

From: Subhash Jadavani <subhashj@...eaurora.org>

[ Upstream commit c7ccee224d2d551f712752c4a16947f6529d6506 ]

SDCC controller reset (SW_RST) during probe may trigger power irq if
previous status of PWRCTL was either BUS_ON or IO_HIGH_V. So before we
enable the power irq interrupt in GIC (by registering the interrupt
handler), we need to ensure that any pending power irq interrupt status
is acknowledged otherwise power irq interrupt handler would be fired
prematurely.

Signed-off-by: Subhash Jadavani <subhashj@...eaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@...eaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@...el.com>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
---
 drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 90ed2e12d345..80c89a31d790 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -642,6 +642,21 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 			       CORE_VENDOR_SPEC_CAPABILITIES0);
 	}
 
+	/*
+	 * Power on reset state may trigger power irq if previous status of
+	 * PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq
+	 * interrupt in GIC, any pending power irq interrupt should be
+	 * acknowledged. Otherwise power irq interrupt handler would be
+	 * fired prematurely.
+	 */
+	sdhci_msm_voltage_switch(host);
+
+	/*
+	 * Ensure that above writes are propogated before interrupt enablement
+	 * in GIC.
+	 */
+	mb();
+
 	/* Setup IRQ for handling power/voltage tasks with PMIC */
 	msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
 	if (msm_host->pwr_irq < 0) {
@@ -651,6 +666,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
+	/* Enable pwr irq interrupts */
+	writel_relaxed(INT_MASK, msm_host->core_mem + CORE_PWRCTL_MASK);
+
 	ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
 					sdhci_msm_pwr_irq, IRQF_ONESHOT,
 					dev_name(&pdev->dev), host);
-- 
2.11.0