[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b0729c10-601f-d609-b807-a87b4bed4e59@nvidia.com>
Date: Wed, 22 Nov 2017 16:15:58 +0000
From: Jon Hunter <jonathanh@...dia.com>
To: Pintu Kumar <pintu.ping@...il.com>
CC: Mikko Perttunen <cyndis@...si.fi>, <linux-pm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
<linux-tegra@...r.kernel.org>
Subject: Re: [tegra186]: emmc resume failing after booting from snapshot image
On 22/11/17 12:26, Pintu Kumar wrote:
> Hello Jon,
> Yes I raised my query there almost 1 week back here.
> https://devtalk.nvidia.com/default/topic/1026527/jetson-tx2/-jetson-tx2-mmc-resume-errors-after-booting-from-suspend/
>
> But no response.
> So, I thought to discuss it here.
> May be some pointers may help to find the root cause.
> One point is that, I am able to resume the board with the sd-card, but
> resume from emmc is returning -110 (may be CMD5 timeout).
> Whether there is any difference between sd-card resume and emmc resume ?
> Do we need to check the card initialization sequence for emmc ?
OK great. There should be a team looking at these so please bare with
them. I noticed that you did not state which release you are using for
TX2 and there are two available (r27 and r28.1 [0]), unless I missed it.
So it is worth stating the release you are using.
What command are you using to suspend to disk?
Cheers
Jon
[0] https://developer.nvidia.com/embedded/linux-tegra-archive
--
nvpublic
Powered by blists - more mailing lists