[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171123075154.3938-4-vigneshr@ti.com>
Date: Thu, 23 Nov 2017 13:21:51 +0530
From: Vignesh R <vigneshr@...com>
To: Santosh Shilimkar <ssantosh@...nel.org>
CC: Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Vignesh R <vigneshr@...com>
Subject: [PATCH 3/6] ARM: dts: keystone-k2g: Move ti,non-removable property to board dts
On 66AK2G EVM mmc1 is connected to emmc whereas 66AK2G ICE baord has SD
card slot connected to mmc1. Therefore move emmc specific
ti,non-removable property from SoC file to EVM's dts file.
Signed-off-by: Vignesh R <vigneshr@...com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 1 +
arch/arm/boot/dts/keystone-k2g.dtsi | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 298a50555e46..03b3e7c5dc8e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -127,6 +127,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ ti,non-removable;
status = "okay";
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 01d29320b04c..ef82c0a6e607 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -372,7 +372,6 @@
dma-names = "tx", "rx";
bus-width = <8>;
ti,needs-special-reset;
- ti,non-removable;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
--
2.15.0
Powered by blists - more mailing lists