linux-kernel - [PATCH V3 04/29] ata: deprecate pci_get_bus_and

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1511801886-6753-5-git-send-email-okaya@codeaurora.org>
Date:   Mon, 27 Nov 2017 11:57:41 -0500
From:   Sinan Kaya <okaya@...eaurora.org>
To:     linux-pci@...r.kernel.org, timur@...eaurora.org
Cc:     linux-arm-msm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        intel-gfx@...ts.freedesktop.org, Sinan Kaya <okaya@...eaurora.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Tejun Heo <tj@...nel.org>,
        linux-ide@...r.kernel.org (open list:LIBATA PATA DRIVERS),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V3 04/29] ata: deprecate pci_get_bus_and_slot()

pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().

Use pci_get_domain_bus_and_slot() and extract the actual domain number
from the pdev passed in.

Signed-off-by: Sinan Kaya <okaya@...eaurora.org>
---
 drivers/ata/pata_ali.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index d19cd88..0b122f9 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -466,7 +466,8 @@ static void ali_init_chipset(struct pci_dev *pdev)
 			tmp |= 0x01;	/* CD_ROM enable for DMA */
 		pci_write_config_byte(pdev, 0x53, tmp);
 	}
-	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	north = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
+					    PCI_DEVFN(0, 0));
 	if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
 		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
 		   Set the south bridge enable bit */
-- 
1.9.1