Message-ID: <0ad179ed-c835-1f0d-4c71-ead2b302da4e@ti.com>
Date:   Tue, 28 Nov 2017 06:53:34 -0600
From:   Dan Murphy <dmurphy@...com>
To:     Jacek Anaszewski <jacek.anaszewski@...il.com>,
        <robh+dt@...nel.org>, <mark.rutland@....com>, <rpurdie@...ys.net>,
        <pavel@....cz>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-leds@...r.kernel.org>
Subject: Re: [PATCH v3 2/2] leds: lm3692x: Introduce LM3692x dual string
 driver

Jacek

Thanks

On 11/18/2017 08:19 AM, Jacek Anaszewski wrote:
> Hi Dan,
> 
> Please find my comments below.
> 
> On 11/15/2017 08:42 PM, Dan Murphy wrote:
>> Introducing the LM3692x Dual-String white LED driver.
>>
>> Data sheet is located
>> http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>
>> v3 - Add missing Makefile and Kconfig from v1 and v2 - https://patchwork.kernel.org/patch/10060075/
>>
>> v2 - Added data sheet link, fixed linuxdoc format, returned on failure in init
>> routine, return on fault_check failure, updated brightness calculation and
>> fixed capitalization issue - https://patchwork.kernel.org/patch/10056675/
>>
>>  drivers/leds/Kconfig        |   7 +
>>  drivers/leds/Makefile       |   1 +
>>  drivers/leds/leds-lm3692x.c | 390 ++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 398 insertions(+)
>>  create mode 100644 drivers/leds/leds-lm3692x.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 318a28fd58fe..1363e77a7d5f 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -137,6 +137,13 @@ config LEDS_LM3642
>>  	  converter plus 1.5A constant current driver for a high-current
>>  	  white LED.
>>  
>> +config LEDS_LM3692X
>> +	tristate "LED support for LM3692x Chips"
>> +	depends on LEDS_CLASS && I2C
>> +	select REGMAP_I2C
>> +	help
>> +	  This option enables support for the TI LM3692x family
>> +	  of LED drivers.
>>  
>>  config LEDS_LOCOMO
>>  	tristate "LED Support for Locomo device"
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index a2a6b5a4f86d..987884a5b9a5 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -74,6 +74,7 @@ obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
>>  obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
>>  obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
>>  obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
>> +obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
>>  
>>  # LED SPI Drivers
>>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
>> diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
>> new file mode 100644
>> index 000000000000..9fa7f5a20466
>> --- /dev/null
>> +++ b/drivers/leds/leds-lm3692x.c
>> @@ -0,0 +1,390 @@
>> +/*
>> + * TI lm3692x LED Driver
>> + *
>> + * Copyright (C) 2017 Texas Instruments
>> + *
>> + * Author: Dan Murphy <dmurphy@...com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * Data sheet is located
>> + * http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
>> + */
>> +
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/leds.h>
>> +#include <linux/regmap.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/slab.h>
>> +
>> +#define LM3692X_LED_NAME	"lm3692x_led"
>> +
>> +#define LM3692X_REV		0x0
>> +#define LM3692X_RESET		0x1
>> +#define LM3692X_EN		0x10
>> +#define LM3692X_BRT_CTRL	0x11
>> +#define LM3692X_PWM_CTRL	0x12
>> +#define LM3692X_BOOST_CTRL	0x13
>> +#define LM3692X_AUTO_FREQ_HI	0x15
>> +#define LM3692X_AUTO_FREQ_LO	0x16
>> +#define LM3692X_BL_ADJ_THRESH	0x17
>> +#define LM3692X_BRT_LSB		0x18
>> +#define LM3692X_BRT_MSB		0x19
>> +#define LM3692X_FAULT_CTRL	0x1e
>> +#define LM3692X_FAULT_FLAGS	0x1f
>> +
>> +#define LM3692X_SW_RESET	BIT(0)
>> +#define LM3692X_DEVICE_EN	BIT(0)
>> +#define LM3692X_LED1_EN		BIT(1)
>> +#define LM3692X_LED2_EN		BIT(2)
>> +
>> +/* Brightness Control Bits */
>> +#define LM3692X_BL_ADJ_POL	BIT(0)
>> +#define LM3692X_RAMP_RATE_125us	0x00
>> +#define LM3692X_RAMP_RATE_250us	BIT(1)
>> +#define LM3692X_RAMP_RATE_500us BIT(2)
>> +#define LM3692X_RAMP_RATE_1ms	(BIT(1) | BIT(2))
>> +#define LM3692X_RAMP_RATE_2ms	BIT(3)
>> +#define LM3692X_RAMP_RATE_4ms	(BIT(3) | BIT(1))
>> +#define LM3692X_RAMP_RATE_8ms	(BIT(2) | BIT(3))
>> +#define LM3692X_RAMP_RATE_16ms	(BIT(1) | BIT(2) | BIT(3))
>> +#define LM3692X_RAMP_EN		BIT(4)
>> +#define LM3692X_BRHT_MODE_REG	0x00
>> +#define LM3692X_BRHT_MODE_PWM	BIT(5)
>> +#define LM3692X_BRHT_MODE_MULTI_RAMP BIT(6)
>> +#define LM3692X_BRHT_MODE_RAMP_MULTI (BIT(5) | BIT(6))
>> +#define LM3692X_MAP_MODE_EXP	BIT(7)
>> +
>> +/* PWM Register Bits */
>> +#define LM3692X_PWM_FILTER_100	BIT(0)
>> +#define LM3692X_PWM_FILTER_150	BIT(1)
>> +#define LM3692X_PWM_FILTER_200	(BIT(0) | BIT(1))
>> +#define LM3692X_PWM_HYSTER_1LSB BIT(2)
>> +#define LM3692X_PWM_HYSTER_2LSB	BIT(3)
>> +#define LM3692X_PWM_HYSTER_3LSB (BIT(3) | BIT(2))
>> +#define LM3692X_PWM_HYSTER_4LSB BIT(4)
>> +#define LM3692X_PWM_HYSTER_5LSB (BIT(4) | BIT(2))
>> +#define LM3692X_PWM_HYSTER_6LSB (BIT(4) | BIT(3))
>> +#define LM3692X_PWM_POLARITY	BIT(5)
>> +#define LM3692X_PWM_SAMP_4MHZ	BIT(6)
>> +#define LM3692X_PWM_SAMP_24MHZ	BIT(7)
>> +
>> +/* Boost Control Bits */
>> +#define LM3692X_OCP_PROT_1A	BIT(0)
>> +#define LM3692X_OCP_PROT_1_25A	BIT(1)
>> +#define LM3692X_OCP_PROT_1_5A	(BIT(0) | BIT(1))
>> +#define LM3692X_OVP_21V		BIT(2)
>> +#define LM3692X_OVP_25V		BIT(3)
>> +#define LM3692X_OVP_29V		(BIT(2) | BIT(3))
>> +#define LM3692X_MIN_IND_22UH	BIT(4)
>> +#define LM3692X_BOOST_SW_1MHZ	BIT(5)
>> +#define LM3692X_BOOST_SW_NO_SHIFT	BIT(6)
>> +
>> +/* Fault Control Bits */
>> +#define LM3692X_FAULT_CTRL_OVP BIT(0)
>> +#define LM3692X_FAULT_CTRL_OCP BIT(1)
>> +#define LM3692X_FAULT_CTRL_TSD BIT(2)
>> +#define LM3692X_FAULT_CTRL_OPEN BIT(3)
>> +
>> +/* Fault Flag Bits */
>> +#define LM3692X_FAULT_FLAG_OVP BIT(0)
>> +#define LM3692X_FAULT_FLAG_OCP BIT(1)
>> +#define LM3692X_FAULT_FLAG_TSD BIT(2)
>> +#define LM3692X_FAULT_FLAG_SHRT BIT(3)
>> +#define LM3692X_FAULT_FLAG_OPEN BIT(4)
>> +
>> +/**
>> + * struct lm3692x_led -
>> + * @lock - Lock for reading/writing the device
>> + * @client - Pointer to the I2C client
>> + * @led_dev - led class device pointer
>> + * @regmap - Devices register map
>> + * @enable_gpio - VDDIO/EN gpio to enable communication interface
>> + * @regulator - LED supply regulator pointer
>> + * @label - LED label
>> + */
>> +struct lm3692x_led {
>> +	struct mutex lock;
>> +	struct i2c_client *client;
>> +	struct led_classdev led_dev;
>> +	struct regmap *regmap;
>> +	struct gpio_desc *enable_gpio;
>> +	struct regulator *regulator;
>> +	const char *label;
>> +};
>> +
>> +static const struct reg_default lm3692x_reg_defs[] = {
>> +	{LM3692X_EN, 0xf},
>> +	{LM3692X_BRT_CTRL, 0x61},
>> +	{LM3692X_PWM_CTRL, 0x73},
>> +	{LM3692X_BOOST_CTRL, 0x6f},
>> +	{LM3692X_AUTO_FREQ_HI, 0x0},
>> +	{LM3692X_AUTO_FREQ_LO, 0x0},
>> +	{LM3692X_BL_ADJ_THRESH, 0x0},
>> +	{LM3692X_BRT_LSB, 0x7},
>> +	{LM3692X_BRT_MSB, 0xff},
>> +	{LM3692X_FAULT_CTRL, 0x7},
>> +};
>> +
>> +static const struct regmap_config lm3692x_regmap_config = {
>> +	.reg_bits = 8,
>> +	.val_bits = 8,
>> +
>> +	.max_register = LM3692X_FAULT_FLAGS,
>> +	.reg_defaults = lm3692x_reg_defs,
>> +	.num_reg_defaults = ARRAY_SIZE(lm3692x_reg_defs),
>> +	.cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static int lm3692x_fault_check(struct lm3692x_led *led)
>> +{
>> +	int ret, fault;
>> +	unsigned int read_buf;
>> +
>> +	ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
>> +	if (ret)
>> +		return ret;
>> +
>> +	fault = read_buf;
>> +
>> +	if (fault)
>> +		dev_err(&led->client->dev, "Detected a fault 0x%X\n",
>> +			fault);
>> +
>> +	return ret;
>> +}
>> +
>> +static int lm3692x_brightness_set(struct led_classdev *led_cdev,
>> +				enum led_brightness brt_val)
>> +{
>> +	struct lm3692x_led *led =
>> +			container_of(led_cdev, struct lm3692x_led, led_dev);
>> +	int ret;
>> +	int led_brightness_lsb = (brt_val >> 5);
>> +
>> +	mutex_lock(&led->lock);
>> +
>> +	ret = lm3692x_fault_check(led);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Cannot read/clear faults\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Cannot write MSB\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Cannot write LSB\n");
>> +		goto out;
>> +	}
>> +out:
>> +	mutex_unlock(&led->lock);
>> +	return ret;
>> +}
>> +
>> +static int lm3692x_init(struct lm3692x_led *led)
>> +{
>> +	int ret;
>> +
>> +	if (led->regulator) {
>> +		ret = regulator_enable(led->regulator);
>> +		if (ret)
>> +			dev_err(&led->client->dev,
>> +				"Failed to enable regulator\n");
>> +			goto out;
>> +	}
>> +
>> +	if (led->enable_gpio)
>> +		gpiod_direction_output(led->enable_gpio, 1);
>> +
>> +	ret = lm3692x_fault_check(led);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Cannot read/clear faults\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, 0x00);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Fail writing BRT CTRL\n");
>> +		goto out;
>> +	}
>> +
>> +	/*
>> +	 * For glitch free operation, the following data should
>> +	 * only be written while device enable bit is 0
>> +	 * per Section 7.5.14 of the data sheet
>> +	 */
>> +	ret = regmap_write(led->regmap, LM3692X_PWM_CTRL,
>> +		LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Failed programming PWM CTRL\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
>> +			LM3692X_BRHT_MODE_RAMP_MULTI |
>> +			LM3692X_BL_ADJ_POL |
>> +			LM3692X_RAMP_RATE_250us);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Failed programming BOOST CTRL\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_HI, 0x00);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Failed programming AUTO HI FREQ\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_LO, 0x00);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Failed programming AUTO LO FREQ\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BL_ADJ_THRESH, 0x00);
>> +	if (ret) {
>> +		dev_err(&led->client->dev, "Failed programming BL Threshold\n");
>> +		goto out;
>> +	}
>> +
>> +	ret = regmap_write(led->regmap, LM3692X_BRT_CTRL,
>> +			LM3692X_BL_ADJ_POL | LM3692X_PWM_HYSTER_4LSB);
>> +	if (ret)
>> +		dev_err(&led->client->dev, "Failed programming BRT CTRL\n");
>> +
>> +	return ret;
>> +out:
>> +
>> +	if (led->enable_gpio)
>> +		gpiod_direction_output(led->enable_gpio, 0);
>> +
>> +	if (led->regulator) {
>> +		ret = regulator_disable(led->regulator);
>> +		if (ret)
>> +			dev_err(&led->client->dev,
>> +				"Failed to disable regulator\n");
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int lm3692x_probe(struct i2c_client *client,
>> +			const struct i2c_device_id *id)
>> +{
>> +	int ret;
>> +	struct lm3692x_led *led;
>> +	struct device_node *np = client->dev.of_node;
>> +
>> +	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
>> +	if (!led)
>> +		return -ENOMEM;
>> +
>> +	if (client->dev.of_node) {
> 
> We should fail in the opposite case.

OK

> 
>> +		ret = of_property_read_string(np, "label", &led->label);
>> +		if (ret)
>> +			led->label = LM3692X_LED_NAME;
> 
> LED label should be taken from the child node name if label property is
> not present. See Documentation/devicetree/bindings/leds/common.txt.
> 
> We have some mess in this area, but I'm going to sort it out soon
> (added you on CC to the related discussion).
> 
> Generally LED class device name should be composed by the LED class
> driver by taking label and prefixing it with "[devicename]:" string.

OK

> 
>> +	}
>> +
>> +	led->enable_gpio = devm_gpiod_get_optional(&client->dev,
>> +						   "enable", GPIOD_OUT_LOW);
>> +	if (IS_ERR(led->enable_gpio)) {
>> +		ret = PTR_ERR(led->enable_gpio);
>> +		dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	led->regulator = devm_regulator_get(&client->dev, "vled");
>> +	if (IS_ERR(led->regulator))
>> +		led->regulator = NULL;
>> +
>> +	led->client = client;
>> +	led->led_dev.name = led->label;
>> +	led->led_dev.max_brightness = LED_FULL;
> 
> You can skip this line, it will be initialized to LED_FULL
> in of_led_classdev_register in this case.

OK

> 
> 
>> +	led->led_dev.brightness_set_blocking = lm3692x_brightness_set;
>> +
>> +	mutex_init(&led->lock);
>> +
>> +	i2c_set_clientdata(client, led);
>> +
>> +	led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config);
>> +	if (IS_ERR(led->regmap)) {
>> +		ret = PTR_ERR(led->regmap);
>> +		dev_err(&client->dev, "Failed to allocate register map: %d\n",
>> +			ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = lm3692x_init(led);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = led_classdev_register(&client->dev, &led->led_dev);
> 
> Please use devm_* prefixed version.

OK

> 
>> +	if (ret) {
>> +		dev_err(&client->dev, "led register err: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int lm3692x_remove(struct i2c_client *client)
>> +{
>> +	struct lm3692x_led *led = i2c_get_clientdata(client);
>> +	int ret;
>> +
>> +	led_classdev_unregister(&led->led_dev);
>> +
>> +	if (led->enable_gpio)
>> +		gpiod_direction_output(led->enable_gpio, 0);
>> +
>> +	if (led->regulator) {
>> +		ret = regulator_disable(led->regulator);
>> +		if (ret)
>> +			dev_err(&led->client->dev,
>> +				"Failed to disable regulator\n");
>> +	}
> 
> mutex_destroy(&led->lock)

OK

> 
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct i2c_device_id lm3692x_id[] = {
>> +	{ "lm3692x", 0 },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, lm3692x_id);
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id of_lm3692x_leds_match[] = {
>> +	{ .compatible = "ti,lm3692x", },
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, of_lm3692x_leds_match);
>> +#endif
>> +
>> +static struct i2c_driver lm3692x_driver = {
>> +	.driver = {
>> +		.name	= "lm3692x",
>> +		.of_match_table = of_match_ptr(of_lm3692x_leds_match),
>> +	},
>> +	.probe		= lm3692x_probe,
>> +	.remove		= lm3692x_remove,
>> +	.id_table	= lm3692x_id,
>> +};
>> +module_i2c_driver(lm3692x_driver);
>> +
>> +MODULE_DESCRIPTION("Texas Instruments LM3692X LED driver");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
>> +MODULE_LICENSE("GPL");
> 
> According to your license info it should be "GPL v2"
> 

OK


Dan
-- 
------------------
Dan Murphy

Powered by blists - more mailing lists