| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1511950857-19292-1-git-send-email-narmstrong@baylibre.com>
Date: Wed, 29 Nov 2017 11:20:51 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/6] ARM: Add Variscite DART-MX6 SoM and Carrier-board support
This patchset adds support for the Variscite DART-MX6 SoM with :
- i.MX6 Quad or Dual Lite SoC
- 1Gb/2Gb LPDDR2
- 4-64 GB eMMC
- Camera Interface
- HDMI+CEC interface
- LVDS / DSI / Parallel RGB interfaces
- Ethernet RGMII interface
- On-SoM Wi-Fi/Bluetooth with WiLink wl1835 SDIO Module
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
- Digital Audio interface
- S/PDIF interface
And the Carrier-Board with the following :
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display
- HDMI Connector
- USB Host + USB OTG Connector
- 10/100/1000 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- On-board DMIC
- CAN bus header
- SPI header
- Camera Interfaces header
- 4xButtons, 2xLeds
- OnBoard RTC with Coin Backup battery socket
- RS232 Header + USB-Serial debug port
First patch contains a missing pinmux define used by the SoM.
Last patch contains configs used by the SoM DT like SERDEV or WL18XX support.
PCIe, On-Board DMIC and Camera Interfaces are not handled yet.
Changes since v3 at [3]:
- minor pcie dt fix
- added tags
Changes since v2 at [2]:
- Added bindings acks
- fixed enable-active-high regulators property
- moved hdmi dd-i2c-bus to son dtsi
- fixed pinmux IOMUX value
- add pcie reset-gpio
Changes since v1 at [1]:
- Add lvds display vendor prefix and bindings
- fix all gpio phandle arguments with correct ACTIVE_XXX define
- drop pcie support
- drop custom operating points
- fix arm/pu/soc vin-supply instead of &cpu node override
- fix can pinmux value
- changed button node name
- add revied-by tags on first and last patches
[1] http://lkml.kernel.org/r/1511281705-30849-1-git-send-email-narmstrong@baylibre.com
[2] http://lkml.kernel.org/r/1511348560-28505-1-git-send-email-narmstrong@baylibre.com
[3] http://lkml.kernel.org/r/1511785716-23492-1-git-send-email-narmstrong@baylibre.com
Neil Armstrong (6):
ARM: dts: imx6qdl-pinfunc: Add missing
MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT
dt-bindings: Add vendor prefix for Solomon Goldentek Display
Corporation
dt-bindings: display: Add bindings for SGD GKTW70SDAE4SE Panel
ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM support
ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board support
ARM: configs: Add missing config for DART-MX6 SoM
.../bindings/display/panel/sgd,gktw70sdae4se.txt | 41 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-pinfunc.h | 1 +
arch/arm/boot/dts/imx6q-pinfunc.h | 1 +
arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 239 ++++++++++
arch/arm/boot/dts/imx6qdl-var-dart.dtsi | 504 +++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 6 +
8 files changed, 794 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.txt
create mode 100644 arch/arm/boot/dts/imx6q-var-dt6customboard.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-var-dart.dtsi
--
2.7.4
Powered by blists - more mailing lists