linux-kernel - [PATCH v3 15/36] hrtimer: Make the remote enqueue check unconditional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171129153101.27297-16-anna-maria@linutronix.de>
Date:   Wed, 29 Nov 2017 16:30:40 +0100
From:   Anna-Maria Gleixner <anna-maria@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     Thomas Gleixner <tglx@...utronix.de>,
        Peter Zijlstra <peterz@...radead.org>,
        Ingo Molnar <mingo@...hat.com>, keescook@...omium.org,
        Christoph Hellwig <hch@....de>,
        John Stultz <john.stultz@...aro.org>,
        Anna-Maria Gleixner <anna-maria@...utronix.de>
Subject: [PATCH v3 15/36] hrtimer: Make the remote enqueue check unconditional

hrtimer_cpu_base.expires_next is used to cache the next event armed in the
timer hardware. The value is used to check whether an hrtimer can be
enqueued remotely. If the new hrtimer is expiring before expires_next, then
remote enqueue is not possible as the remote hrtimer hardware cannot be
accessed for reprogramming to an earlier expiry time.

The remote enqueue check is currently conditional on
CONFIG_HIGH_RES_TIMERS=y and hrtimer_cpu_base.hres_active. There is no
compelling reason to make this conditional.

Move hrtimer_cpu_base.expires_next out of the CONFIG_HIGH_RES_TIMERS=y
guarded area and remove the conditionals in hrtimer_check_target().

The check is currently a NOOP for the CONFIG_HIGH_RES_TIMERS=n and the
!hrtimer_cpu_base.hres_active case because in these cases nothing updates
hrtimer_cpu_base.expires_next yet. This will be changed with later patches
which further reduce the #ifdef zoo in this code.

Signed-off-by: Anna-Maria Gleixner <anna-maria@...utronix.de>
---
 include/linux/hrtimer.h |  6 +++---
 kernel/time/hrtimer.c   | 26 ++++++--------------------
 2 files changed, 9 insertions(+), 23 deletions(-)

diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 22627b3a33fe..bb7270e8bc37 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -164,13 +164,13 @@ enum  hrtimer_base_type {
  * @hres_active:	State of high resolution mode
  * @in_hrtirq:		hrtimer_interrupt() is currently executing
  * @hang_detected:	The last hrtimer interrupt detected a hang
- * @expires_next:	absolute time of the next event, is required for remote
- *			hrtimer enqueue
  * @next_timer:		Pointer to the first expiring timer
  * @nr_events:		Total number of hrtimer interrupt events
  * @nr_retries:		Total number of hrtimer interrupt retries
  * @nr_hangs:		Total number of hrtimer interrupt hangs
  * @max_hang_time:	Maximum time spent in hrtimer_interrupt
+ * @expires_next:	absolute time of the next event, is required for remote
+ *			hrtimer enqueue
  * @clock_base:		array of clock bases for this cpu
  *
  * Note: next_timer is just an optimization for __remove_hrtimer().
@@ -186,13 +186,13 @@ struct hrtimer_cpu_base {
 #ifdef CONFIG_HIGH_RES_TIMERS
 	unsigned int			in_hrtirq	: 1,
 					hang_detected	: 1;
-	ktime_t				expires_next;
 	struct hrtimer			*next_timer;
 	unsigned int			nr_events;
 	unsigned short			nr_retries;
 	unsigned short			nr_hangs;
 	unsigned int			max_hang_time;
 #endif
+	ktime_t				expires_next;
 	struct hrtimer_clock_base	clock_base[HRTIMER_MAX_CLOCK_BASES];
 } ____cacheline_aligned;
 
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index 0a1804c65a15..069e3dfd0e3c 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -154,26 +154,21 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
 }
 
 /*
- * With HIGHRES=y we do not migrate the timer when it is expiring
- * before the next event on the target cpu because we cannot reprogram
- * the target cpu hardware and we would cause it to fire late.
+ * We do not migrate the timer when it is expiring before the next
+ * event on the target cpu. When high resolution is enabled, we cannot
+ * reprogram the target cpu hardware and we would cause it to fire
+ * late. To keep it simple, we handle the high resolution enabled and
+ * disabled case similar.
  *
  * Called with cpu_base->lock of target cpu held.
  */
 static int
 hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
 {
-#ifdef CONFIG_HIGH_RES_TIMERS
 	ktime_t expires;
 
-	if (!new_base->cpu_base->hres_active)
-		return 0;
-
 	expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
 	return expires <= new_base->cpu_base->expires_next;
-#else
-	return 0;
-#endif
 }
 
 static inline
@@ -657,14 +652,6 @@ static void hrtimer_reprogram(struct hrtimer *timer,
 }
 
 /*
- * Initialize the high resolution related parts of cpu_base
- */
-static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
-{
-	base->expires_next = KTIME_MAX;
-}
-
-/*
  * Retrigger next event is called after clock was set
  *
  * Called with interrupts disabled via on_each_cpu()
@@ -729,7 +716,6 @@ static inline int hrtimer_reprogram(struct hrtimer *timer,
 {
 	return 0;
 }
-static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
 static inline void retrigger_next_event(void *arg) { }
 
 #endif /* CONFIG_HIGH_RES_TIMERS */
@@ -1599,7 +1585,7 @@ int hrtimers_prepare_cpu(unsigned int cpu)
 
 	cpu_base->cpu = cpu;
 	cpu_base->hres_active = 0;
-	hrtimer_init_hres(cpu_base);
+	cpu_base->expires_next = KTIME_MAX;
 	return 0;
 }
 
-- 
2.11.0