[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171130201434.14122-1-tyler@opensourcefoundries.com>
Date: Thu, 30 Nov 2017 12:14:26 -0800
From: tyler@...nsourcefoundries.com
To: shawnguo@...nel.org, fabio.estevam@....com, kernel@...gutronix.de
Cc: robh+dt@...nel.org, mark.rutland@....com,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Tyler Baker <tyler@...nsourcefoundries.com>
Subject: [PATCH 0/8] ARM: dts: introduce Compulab IoT Gateway
From: Tyler Baker <tyler@...nsourcefoundries.com>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core
Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3,
and 32GB of eMMC flash. Onboard, there are two gigabit
ethernet controllers, 4 x USB2, RS485, and CAN.
It uses the same SoM as the cl-som-imx7, but includes a baseboard
with additional I/O.
Compulab has provided patches for this platform based on v4.1.
I've used these patches as reference to get things working on tip.
The entire series is based on v4.15-rc1.
Tyler Baker (8):
ARM: dts: imx7d-sbc-iot: add initial iot gateway dts
ARM: dts: imx7: build imx7d-sbc-iot-imx7 dtb
ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2
ARM: dts: imx7s: add dma support
ARM: dts: imx7s: add node and supplies for vdd1p2
ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
ARM: dts: imx7s: add usb hsic phy domain
PCIe: imx6: imx7d: add support for phy refclk source
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 36 ++++-
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 252 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 29 +++-
drivers/pci/dwc/pci-imx6.c | 8 +-
5 files changed, 316 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
--
2.9.3
Powered by blists - more mailing lists