linux-kernel - Re: [PATCH 2/2] eeprom: at24: use a common prefix for all symbols in at24.c

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMRc=McAD78rOPjybObjxcabD3suhrcitDZJje9wmW3ykXfmEg@mail.gmail.com>
Date:   Wed, 6 Dec 2017 12:05:42 +0100
From:   Bartosz Golaszewski <brgl@...ev.pl>
To:     Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
Cc:     linux-i2c <linux-i2c@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] eeprom: at24: use a common prefix for all symbols in at24.c

2017-12-06 12:03 GMT+01:00 Uwe Kleine-König <u.kleine-koenig@...gutronix.de>:
> On Wed, Dec 06, 2017 at 11:19:26AM +0100, Bartosz Golaszewski wrote:
>> There are a couple symbols defined in the driver source file which are
>> missing the at24_ prefix. This patch fixes that.
>>
>> Signed-off-by: Bartosz Golaszewski <brgl@...ev.pl>
>> ---
>>  drivers/misc/eeprom/at24.c | 34 ++++++++++++++++++----------------
>>  1 file changed, 18 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
>> index 2426f2c111c7..4ead21d0dcc5 100644
>> --- a/drivers/misc/eeprom/at24.c
>> +++ b/drivers/misc/eeprom/at24.c
>> @@ -93,17 +93,17 @@ struct at24_data {
>>   *
>>   * This value is forced to be a power of two so that writes align on pages.
>>   */
>> -static unsigned int io_limit = 128;
>> -module_param(io_limit, uint, 0000);
>> -MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
>> +static unsigned int at24_io_limit = 128;
>> +module_param(at24_io_limit, uint, 0000);
>> +MODULE_PARM_DESC(at24_io_limit, "Maximum bytes per I/O (default 128)");
>
> You change the names of the module parameters here. I think this is not
> a good idea as now you have to pass
>
>         at24.at24_io_limit=...
>
> on the kernel command line. If you still want this change, I think there
> is some documentation that needs adaption, too.
>
> Best regards
> Uwe
>
>
> --
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Ugh, right, this must stay as it was. Thanks!

Bartosz