[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171206111939.1153-7-jacob-chen@iotwrt.com>
Date: Wed, 6 Dec 2017 19:19:33 +0800
From: Jacob Chen <jacob-chen@...wrt.com>
To: linux-rockchip@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
mchehab@...nel.org, linux-media@...r.kernel.org,
sakari.ailus@...ux.intel.com, hans.verkuil@...co.com,
tfiga@...omium.org, zhengsq@...k-chips.com,
laurent.pinchart@...asonboard.com, zyc@...k-chips.com,
eddie.cai.linux@...il.com, jeffy.chen@...k-chips.com,
allon.huang@...k-chips.com, devicetree@...r.kernel.org,
heiko@...ech.de, robh+dt@...nel.org, Joao.Pinto@...opsys.com,
Luis.Oliveira@...opsys.com, Jose.Abreu@...opsys.com,
Jacob Chen <jacob2.chen@...k-chips.com>
Subject: [PATCH v3 06/12] dt-bindings: Document the Rockchip ISP1 bindings
From: Jacob Chen <jacob2.chen@...k-chips.com>
Add DT bindings documentation for Rockchip ISP1
Signed-off-by: Jacob Chen <jacob2.chen@...k-chips.com>
---
.../devicetree/bindings/media/rockchip-isp1.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rockchip-isp1.txt
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.txt b/Documentation/devicetree/bindings/media/rockchip-isp1.txt
new file mode 100644
index 000000000000..0971ed94ed69
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.txt
@@ -0,0 +1,57 @@
+Rockchip SoC Image Signal Processing unit v1
+----------------------------------------------
+
+Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs
+which contains image processing, scaling, and compression funcitons.
+
+Required properties:
+ - compatible: value should be one of the following
+ "rockchip,rk3288-cif-isp";
+ "rockchip,rk3399-cif-isp";
+ - reg : offset and length of the register set for the device.
+ - interrupts: should contain ISP interrupt.
+ - clocks: phandle to the required clocks.
+ - clock-names: required clock name.
+ - iommus: required a iommu node.
+
+The device node should contain one 'port' child node with child 'endpoint'
+nodes, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt.
+
+For sensor with a parallel video bus, it could be linked directly to the isp.
+For sensor with a MIPI CSI-2 video bus, it should be linked through the
+MIPI-DPHY, which is defined in rockchip-mipi-dphy.txt.
+
+Device node example
+-------------------
+
+ isp0: isp0@...10000 {
+ compatible = "rockchip,rk3399-cif-isp";
+ reg = <0x0 0xff910000 0x0 0x4000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_ISP0>,
+ <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
+ <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
+ clock-names = "clk_isp",
+ "aclk_isp", "aclk_isp_wrap",
+ "hclk_isp", "hclk_isp_wrap";
+ power-domains = <&power RK3399_PD_ISP0>;
+ iommus = <&isp0_mmu>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* mipi */
+ isp0_mipi_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dphy_rx0_out>;
+ };
+
+ /* parallel */
+ isp0_parallel_in: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&ov5640_out>;
+ };
+ };
+ };
--
2.15.0
Powered by blists - more mailing lists