[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <10bad1055cf009e0f61e5779dd3d34d1b83c43f5.1512662253.git-series.maxime.ripard@free-electrons.com>
Date: Thu, 7 Dec 2017 16:58:46 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Daniel Vetter <daniel.vetter@...el.com>,
David Airlie <airlied@...ux.ie>, Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, plaes@...es.org,
icenowy@...c.io,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
jernej.skrabec@...l.net, devicetree@...r.kernel.org,
thierry.reding@...il.com
Subject: [PATCH v4 01/15] dt-bindings: panel: lvds: Document power-supply property
The power-supply property is used by a vast majority of panels, including
panel-simple. Let's document it as a common property
Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
Documentation/devicetree/bindings/display/panel/panel-common.txt | 6 ++++++
Documentation/devicetree/bindings/display/panel/panel-lvds.txt | 1 +
Documentation/devicetree/bindings/display/panel/simple-panel.txt | 2 +-
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt
index ec52c472c845..125ea68052af 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt
@@ -78,6 +78,12 @@ used for panels that implement compatible control signals.
while active. Active high reset signals can be supported by inverting the
GPIO specifier polarity flag.
+Power
+-----
+
+- power-supply: many display panels need an additional power supply in
+ order to be fully powered-up. For such panels, power-supply contains
+ a phandle to the regulator powering the panel.
Backlight
---------
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
index b938269f841e..250850a2150b 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
@@ -32,6 +32,7 @@ Optional properties:
- label: See panel-common.txt.
- gpios: See panel-common.txt.
- backlight: See panel-common.txt.
+- power-supply: See panel-common.txt.
- data-mirror: If set, reverse the bit order described in the data mappings
below on all data lanes, transmitting bits for slots 6 to 0 instead of
0 to 6.
diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index 1341bbf4aa3d..16d8ff088b7d 100644
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -1,7 +1,7 @@
Simple display panel
Required properties:
-- power-supply: regulator to provide the supply voltage
+- power-supply: See panel-common.txt
Optional properties:
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
--
git-series 0.9.1
Powered by blists - more mailing lists