lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171207154845.4814-34-alexander.levin@verizon.com>
Date:   Thu, 7 Dec 2017 15:49:02 +0000
From:   alexander.levin@...izon.com
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Cc:     Ram Amrani <Ram.Amrani@...ium.com>,
        Yuval Mintz <Yuval.Mintz@...ium.com>,
        "David S . Miller" <davem@...emloft.net>,
        alexander.levin@...izon.com
Subject: [PATCH AUTOSEL for 4.9 034/156] qed: Align CIDs according to DORQ
 requirement

From: Ram Amrani <Ram.Amrani@...ium.com>

[ Upstream commit f3e48119b97f56fb09310c95d49da122a27003d7 ]

The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.

Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.

Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <Ram.Amrani@...ium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@...ium.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
---
 drivers/net/ethernet/qlogic/qed/qed_cxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index 0c42c240b5cf..ed014bdbbabd 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -373,8 +373,9 @@ static void qed_cxt_set_proto_cid_count(struct qed_hwfn *p_hwfn,
 		u32 page_sz = p_mgr->clients[ILT_CLI_CDUC].p_size.val;
 		u32 cxt_size = CONN_CXT_SIZE(p_hwfn);
 		u32 elems_per_page = ILT_PAGE_IN_BYTES(page_sz) / cxt_size;
+		u32 align = elems_per_page * DQ_RANGE_ALIGN;
 
-		p_conn->cid_count = roundup(p_conn->cid_count, elems_per_page);
+		p_conn->cid_count = roundup(p_conn->cid_count, align);
 	}
 }
 
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ