linux-kernel - [PATCH AUTOSEL for 4.14 100/135] dmaengine: rcar-dmac: use TCRB instead of TCR for residue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171207154513.4154-100-alexander.levin@verizon.com>
Date:   Thu, 7 Dec 2017 15:45:54 +0000
From:   alexander.levin@...izon.com
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Cc:     Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@...esas.com>,
        Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
        Vinod Koul <vinod.koul@...el.com>, alexander.levin@...izon.com
Subject: [PATCH AUTOSEL for 4.14 100/135] dmaengine: rcar-dmac: use TCRB
 instead of TCR for residue

From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@...esas.com>

[ Upstream commit 847449f23dcbff68234525f90dd53c7c7db18cad ]

SYS/RT/Audio DMAC includes independent data buffers for reading
and writing. Therefore, the read transfer counter and write transfer
counter have different values.
TCR indicates read counter, and TCRB indicates write counter.
The relationship is like below.

        TCR       TCRB
[SOURCE] -> [DMAC] -> [SINK]

In the MEM_TO_DEV direction, what really matters is how much data has
been written to the device. If the DMA is interrupted between read and
write, then, the data doesn't end up in the destination, so shouldn't
be counted. TCRB is thus the register we should use in this cases.

In the DEV_TO_MEM direction, the situation is more complex. Both the
read and write side are important. What matters from a data consumer
point of view is how much data has been written to memory.
On the other hand, if the transfer is interrupted between read and
write, we'll end up losing data. It can also be important to report.

In the MEM_TO_MEM direction, what matters is of course how much data
has been written to memory from data consumer point of view.
Here, because read and write have independent data buffers, it will
take a while for TCR and TCRB to become equal. Thus we should check
TCRB in this case, too.

Thus, all cases we should check TCRB instead of TCR.

Without this patch, Sound Capture has noise after PluseAudio support
(= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because
the recorder will use wrong residue counter which indicates transferred
from sound device, but in reality the data was not yet put to memory
and recorder will record it.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@...esas.com>
[Kuninori: added detail information in log]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@...el.com>

Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
---
 drivers/dma/sh/rcar-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 2b2c7db3e480..50c4950050be 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1310,7 +1310,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	}

 	/* Add the residue for the current chunk. */
-	residue += rcar_dmac_chan_read(chan, RCAR_DMATCR) << desc->xfer_shift;
+	residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift;

 	return residue;
 }
-- 
2.11.0