linux-kernel - [PATCH 4.4 41/49] usb: hub: Cycle HUB power when initialization fails

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171207124709.506897815@linuxfoundation.org>
Date:   Thu,  7 Dec 2017 14:07:35 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Mike Looijmans <mike.looijmans@...ic.nl>,
        Alan Stern <stern@...land.harvard.edu>
Subject: [PATCH 4.4 41/49] usb: hub: Cycle HUB power when initialization fails

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <mike.looijmans@...ic.nl>

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
Acked-by: Alan Stern <stern@...land.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/core/hub.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4858,6 +4858,15 @@ loop:
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
+
+		/* When halfway through our retry count, power-cycle the port */
+		if (i == (SET_CONFIG_TRIES / 2) - 1) {
+			dev_info(&port_dev->dev, "attempt power cycle\n");
+			usb_hub_set_port_power(hdev, hub, port1, false);
+			msleep(2 * hub_power_on_good_delay(hub));
+			usb_hub_set_port_power(hdev, hub, port1, true);
+			msleep(hub_power_on_good_delay(hub));
+		}
 	}
 	if (hub->hdev->parent ||
 			!hcd->driver->port_handed_over ||