[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171207152415.GB24750@lunn.ch>
Date: Thu, 7 Dec 2017 16:24:15 +0100
From: Andrew Lunn <andrew@...n.ch>
To: sean.wang@...iatek.com
Cc: davem@...emloft.net, f.fainelli@...il.com,
vivien.didelot@...oirfairelinux.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 1/3] net: dsa: mediatek: add VLAN support for
MT7530
> static void
> +mt7530_port_set_vlan_unware(struct dsa_switch *ds, int port)
> +{
> + struct mt7530_priv *priv = ds->priv;
> + int i;
> + bool all_user_ports_removed = true;
Hi Sean
Reverse Christmas tree please.
> +static int
> +mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
> +{
> + u32 val;
> + int ret;
> + struct mt7530_dummy_poll p;
Here too.
> +static int
> +mt7530_port_vlan_prepare(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan,
> + struct switchdev_trans *trans)
> +{
> + struct mt7530_priv *priv = ds->priv;
> +
> + /* The port is being kept as VLAN-unware port when bridge is set up
> + * with vlan_filtering not being set, Otherwise, the port and the
> + * corresponding CPU port is required the setup for becoming a
> + * VLAN-ware port.
> + */
> + if (!priv->ports[port].vlan_filtering)
> + return 0;
> +
> + mt7530_port_set_vlan_ware(ds, port);
> + mt7530_port_set_vlan_ware(ds, MT7530_CPU_PORT);
A prepare function should just validate that it is possible to carry
out the operation. It should not change any state. These two last
lines probably don't belong here.
> +
> + return 0;
> +}
> +
> +static void
> +mt7530_hw_vlan_add(struct mt7530_priv *priv,
> + struct mt7530_hw_vlan_entry *entry)
> +{
> + u32 val;
> + u8 new_members;
Reverse Christmas tree. Please check the whole patch.
> +static inline void INIT_MT7530_HW_ENTRY(struct mt7530_hw_vlan_entry *e,
> + int port, bool untagged)
> +{
> + e->port = port;
> + e->untagged = untagged;
> +}
All CAPITAL letters is for #defines. This is just a normal
function. Please use lower case.
Andrew
Powered by blists - more mailing lists