| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c85f55a434efada592c50f46c0d0532fdb5340b0.1512708743.git.baolin.wang@spreadtrum.com>
Date: Fri, 8 Dec 2017 13:03:24 +0800
From: Baolin Wang <baolin.wang@...eadtrum.com>
To: <daniel.lezcano@...aro.org>, <tglx@...utronix.de>,
<robh+dt@...nel.org>, <mark.rutland@....com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<broonie@...nel.org>, <baolin.wang@...aro.org>,
<baolin.wang@...eadtrum.com>
Subject: [PATCH v3 2/2] clocksource: sprd: Add timer driver for Spreadtrum SC9860 platform
The Spreadtrum SC9860 platform will use the architected timers as local
clock events, but we also need a broadcast timer device to wakeup the
cpus when the cpus are in sleep mode.
The Spreadtrum timer can support 32bit or 64bit counter, as well as
supporting period mode or one-shot mode.
Signed-off-by: Baolin Wang <baolin.wang@...eadtrum.com>
---
Changes since v2:
- Add more timer description in changelog.
- Rename the driver file.
- Remove GENERIC_CLOCKEVENTS and ARCH_SPRD dependency.
- Remove some redundant headfiles.
- Use timer-of APIs.
- Change the license format according to Linus[1][2][3],
Thomas[4] and Greg[5] comments on the topic.
[1] https://lkml.org/lkml/2017/11/2/715
[2] https://lkml.org/lkml/2017/11/25/125
[3] https://lkml.org/lkml/2017/11/25/133
[4] https://lkml.org/lkml/2017/11/2/805
[5] https://lkml.org/lkml/2017/10/19/165
Changes since v1:
- Change to 32bit counter to avoid build warning.
---
drivers/clocksource/Kconfig | 7 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-sprd.c | 168 ++++++++++++++++++++++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 drivers/clocksource/timer-sprd.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88..9a6b087 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -441,6 +441,13 @@ config MTK_TIMER
help
Support for Mediatek timer driver.
+config SPRD_TIMER
+ bool "Spreadtrum timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select TIMER_OF
+ help
+ Enables the support for the Spreadtrum timer driver.
+
config SYS_SUPPORTS_SH_MTU2
bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1..d6dec44 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
+obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
diff --git a/drivers/clocksource/timer-sprd.c b/drivers/clocksource/timer-sprd.c
new file mode 100644
index 0000000..81a5f0c
--- /dev/null
+++ b/drivers/clocksource/timer-sprd.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include "timer-of.h"
+
+#define TIMER_NAME "sprd_timer"
+
+#define TIMER_LOAD_LO 0x0
+#define TIMER_LOAD_HI 0x4
+#define TIMER_VALUE_LO 0x8
+#define TIMER_VALUE_HI 0xc
+
+#define TIMER_CTL 0x10
+#define TIMER_CTL_PERIOD_MODE BIT(0)
+#define TIMER_CTL_ENABLE BIT(1)
+#define TIMER_CTL_64BIT_WIDTH BIT(16)
+
+#define TIMER_INT 0x14
+#define TIMER_INT_EN BIT(0)
+#define TIMER_INT_RAW_STS BIT(1)
+#define TIMER_INT_MASK_STS BIT(2)
+#define TIMER_INT_CLR BIT(3)
+
+#define TIMER_VALUE_SHDW_LO 0x18
+#define TIMER_VALUE_SHDW_HI 0x1c
+
+#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
+
+static void sprd_timer_enable(void __iomem *base, u32 flag)
+{
+ u32 val = readl_relaxed(base + TIMER_CTL);
+
+ val |= TIMER_CTL_ENABLE;
+ if (flag & TIMER_CTL_64BIT_WIDTH)
+ val |= TIMER_CTL_64BIT_WIDTH;
+ else
+ val &= ~TIMER_CTL_64BIT_WIDTH;
+
+ if (flag & TIMER_CTL_PERIOD_MODE)
+ val |= TIMER_CTL_PERIOD_MODE;
+ else
+ val &= ~TIMER_CTL_PERIOD_MODE;
+
+ writel_relaxed(val, base + TIMER_CTL);
+}
+
+static void sprd_timer_disable(void __iomem *base)
+{
+ u32 val = readl_relaxed(base + TIMER_CTL);
+
+ val &= ~TIMER_CTL_ENABLE;
+ writel_relaxed(val, base + TIMER_CTL);
+}
+
+static void sprd_timer_update_counter(void __iomem *base, unsigned long cycles)
+{
+ writel_relaxed(cycles & TIMER_VALUE_LO_MASK, base + TIMER_LOAD_LO);
+ writel_relaxed(0, base + TIMER_LOAD_HI);
+}
+
+static void sprd_timer_enable_interrupt(void __iomem *base)
+{
+ writel_relaxed(TIMER_INT_EN, base + TIMER_INT);
+}
+
+static void sprd_timer_clear_interrupt(void __iomem *base)
+{
+ u32 val = readl_relaxed(base + TIMER_INT);
+
+ val |= TIMER_INT_CLR;
+ writel_relaxed(val, base + TIMER_INT);
+}
+
+static int sprd_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ sprd_timer_update_counter(timer_of_base(to), cycles);
+ sprd_timer_enable(timer_of_base(to), 0);
+
+ return 0;
+}
+
+static int sprd_timer_set_periodic(struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ sprd_timer_update_counter(timer_of_base(to), timer_of_period(to));
+ sprd_timer_enable(timer_of_base(to), TIMER_CTL_PERIOD_MODE);
+
+ return 0;
+}
+
+static int sprd_timer_shutdown(struct clock_event_device *ce)
+{
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_disable(timer_of_base(to));
+ return 0;
+}
+
+static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(ce);
+
+ sprd_timer_clear_interrupt(timer_of_base(to));
+
+ if (clockevent_state_oneshot(ce))
+ sprd_timer_disable(timer_of_base(to));
+
+ ce->event_handler(ce);
+ return IRQ_HANDLED;
+}
+
+static struct timer_of to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE,
+
+ .clkevt = {
+ .name = TIMER_NAME,
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = sprd_timer_shutdown,
+ .set_state_periodic = sprd_timer_set_periodic,
+ .set_next_event = sprd_timer_set_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+
+ .of_irq = {
+ .handler = sprd_timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static int __init sprd_timer_init(struct device_node *np)
+{
+ int ret;
+ u32 freq;
+
+ ret = timer_of_init(np, &to);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(np, "clock-frequency", &freq);
+ if (ret) {
+ pr_err("failed to get clock frequency\n");
+ timer_of_cleanup(&to);
+ return ret;
+ }
+
+ to.of_clk.period = DIV_ROUND_UP(freq, HZ);
+
+ sprd_timer_enable_interrupt(timer_of_base(&to));
+ clockevents_config_and_register(&to.clkevt, freq, 1, UINT_MAX);
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(sc9860_timer, "sprd,sc9860-timer", sprd_timer_init);
--
1.7.9.5
Powered by blists - more mailing lists