| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171208094210.24887-5-yanaijie@huawei.com>
Date: Fri, 8 Dec 2017 17:42:07 +0800
From: Jason Yan <yanaijie@...wei.com>
To: <martin.petersen@...cle.com>, <jejb@...ux.vnet.ibm.com>
CC: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<john.garry@...wei.com>, <zhaohongjiang@...wei.com>,
<hare@...e.com>, <dan.j.williams@...el.com>, <jthumshirn@...e.de>,
<Raj.Dinesh@...rosemi.com>, <hch@....de>,
<huangdaode@...ilicon.com>, <chenxiang66@...ilicon.com>,
<xiyou.wangcong@...il.com>, Jason Yan <yanaijie@...wei.com>,
Yijing Wang <wangyijing@...wei.com>,
Ewan Milne <emilne@...hat.com>, Tomas Henzl <thenzl@...hat.com>
Subject: [PATCH v5 4/7] scsi: libsas: Use new workqueue to run sas event and disco event
Now all libsas works are queued to scsi host workqueue,
include sas event work post by LLDD and sas discovery
work, and a sas hotplug flow may be divided into several
works, e.g libsas receive a PORTE_BYTES_DMAED event,
currently we process it as following steps:
sas_form_port --- run in work in shost workq
sas_discover_domain --- run in another work in shost workq
...
sas_probe_devices --- run in new work in shost workq
We found during hot-add a device, libsas may need run several
works in same workqueue to add device in system, the process is
not atomic, it may interrupt by other sas event works, like
PHYE_LOSS_OF_SIGNAL.
This patch is preparation of execute libsas sas event in sync. We need
to use different workqueue to run sas event and disco event. Otherwise
the work will be blocked for waiting another chained work in the same
workqueue.
Signed-off-by: Yijing Wang <wangyijing@...wei.com>
CC: John Garry <john.garry@...wei.com>
CC: Johannes Thumshirn <jthumshirn@...e.de>
CC: Ewan Milne <emilne@...hat.com>
CC: Christoph Hellwig <hch@....de>
CC: Tomas Henzl <thenzl@...hat.com>
CC: Dan Williams <dan.j.williams@...el.com>
Signed-off-by: Jason Yan <yanaijie@...wei.com>
---
drivers/scsi/libsas/sas_discover.c | 2 +-
drivers/scsi/libsas/sas_event.c | 6 +++---
drivers/scsi/libsas/sas_init.c | 18 ++++++++++++++++++
include/scsi/libsas.h | 3 +++
4 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 60de662..14f714d 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -534,7 +534,7 @@ static void sas_chain_work(struct sas_ha_struct *ha, struct sas_work *sw)
* workqueue, or known to be submitted from a context that is
* not racing against draining
*/
- scsi_queue_work(ha->core.shost, &sw->work);
+ queue_work(ha->disco_q, &sw->work);
}
static void sas_chain_event(int event, unsigned long *pending,
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
index 5d7254a..8c82c00 100644
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -40,7 +40,7 @@ int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw)
if (list_empty(&sw->drain_node))
list_add_tail(&sw->drain_node, &ha->defer_q);
} else
- rc = scsi_queue_work(ha->core.shost, &sw->work);
+ rc = queue_work(ha->event_q, &sw->work);
return rc;
}
@@ -61,7 +61,6 @@ static int sas_queue_event(int event, struct sas_work *work,
void __sas_drain_work(struct sas_ha_struct *ha)
{
- struct workqueue_struct *wq = ha->core.shost->work_q;
struct sas_work *sw, *_sw;
int ret;
@@ -70,7 +69,8 @@ void __sas_drain_work(struct sas_ha_struct *ha)
spin_lock_irq(&ha->lock);
spin_unlock_irq(&ha->lock);
- drain_workqueue(wq);
+ drain_workqueue(ha->event_q);
+ drain_workqueue(ha->disco_q);
spin_lock_irq(&ha->lock);
clear_bit(SAS_HA_DRAINING, &ha->state);
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index afd928b..c81a63b 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -110,6 +110,7 @@ void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
int sas_register_ha(struct sas_ha_struct *sas_ha)
{
+ char name[64];
int error = 0;
mutex_init(&sas_ha->disco_mutex);
@@ -143,10 +144,24 @@ int sas_register_ha(struct sas_ha_struct *sas_ha)
goto Undo_ports;
}
+ error = -ENOMEM;
+ snprintf(name, sizeof(name), "%s_event_q", dev_name(sas_ha->dev));
+ sas_ha->event_q = create_singlethread_workqueue(name);
+ if (!sas_ha->event_q)
+ goto Undo_ports;
+
+ snprintf(name, sizeof(name), "%s_disco_q", dev_name(sas_ha->dev));
+ sas_ha->disco_q = create_singlethread_workqueue(name);
+ if (!sas_ha->disco_q)
+ goto Undo_event_q;
+
INIT_LIST_HEAD(&sas_ha->eh_done_q);
INIT_LIST_HEAD(&sas_ha->eh_ata_q);
return 0;
+
+Undo_event_q:
+ destroy_workqueue(sas_ha->event_q);
Undo_ports:
sas_unregister_ports(sas_ha);
Undo_phys:
@@ -177,6 +192,9 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha)
__sas_drain_work(sas_ha);
mutex_unlock(&sas_ha->drain_mutex);
+ destroy_workqueue(sas_ha->disco_q);
+ destroy_workqueue(sas_ha->event_q);
+
return 0;
}
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 701c67f..fa93c41 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -389,6 +389,9 @@ struct sas_ha_struct {
struct device *dev; /* should be set */
struct module *lldd_module; /* should be set */
+ struct workqueue_struct *event_q;
+ struct workqueue_struct *disco_q;
+
u8 *sas_addr; /* must be set */
u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
--
2.9.5
Powered by blists - more mailing lists