[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171211190157.12371-3-afd@ti.com>
Date: Mon, 11 Dec 2017 13:01:56 -0600
From: "Andrew F. Davis" <afd@...com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: <alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, "Andrew F . Davis" <afd@...com>
Subject: [PATCH 3/4] ASoC: codecs: tas5720: add TAS5722 specific volume control
From: Andreas Dannenberg <dannenberg@...com>
The TAS5722 supports modifying volume in 0.25dB steps (as opposed to 0.5dB
steps on the TAS5720). Introduce a custom mixer control that allows taking
advantage of this finer output volume granularity.
Signed-off-by: Andreas Dannenberg <dannenberg@...com>
Signed-off-by: Andrew F. Davis <afd@...com>
---
sound/soc/codecs/tas5720.c | 88 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 83 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/tas5720.c b/sound/soc/codecs/tas5720.c
index f3006f301fe8..042068964afb 100644
--- a/sound/soc/codecs/tas5720.c
+++ b/sound/soc/codecs/tas5720.c
@@ -491,11 +491,59 @@ static const DECLARE_TLV_DB_RANGE(dac_analog_tlv,
* setting the gain below -100 dB (register value <0x7) is effectively a MUTE
* as per device datasheet.
*/
-static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0);
+static DECLARE_TLV_DB_SCALE(tas5720_dac_tlv, -10350, 50, 0);
+
static const struct snd_kcontrol_new tas5720_snd_controls[] = {
SOC_SINGLE_TLV("Speaker Driver Playback Volume",
- TAS5720_VOLUME_CTRL_REG, 0, 0xff, 0, dac_tlv),
+ TAS5720_VOLUME_CTRL_REG, 0, 0xff, 0, tas5720_dac_tlv),
+ SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
+ TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
+};
+
+/*
+ * DAC digital volumes. From -103.5 to 24 dB in 0.25 dB steps. Note that
+ * setting the gain below -100 dB (register value <0x8) is effectively a MUTE
+ * as per device datasheet.
+ *
+ * Note that for the TAS5722 the digital volume controls are actually split
+ * over two registers, so we need custom getters/setters for access.
+ */
+static DECLARE_TLV_DB_SCALE(tas5722_dac_tlv, -10350, 25, 0);
+
+static int tas5722_volume_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ unsigned int val;
+
+ val = snd_soc_read(codec, TAS5720_VOLUME_CTRL_REG);
+ ucontrol->value.integer.value[0] = val << 1;
+
+ val = snd_soc_read(codec, TAS5722_DIGITAL_CTRL2_REG);
+ ucontrol->value.integer.value[0] |= val & TAS5722_VOL_CONTROL_LSB;
+
+ return 0;
+}
+
+static int tas5722_volume_set(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ unsigned int sel = ucontrol->value.integer.value[0];
+
+ snd_soc_write(codec, TAS5720_VOLUME_CTRL_REG, sel >> 1);
+ snd_soc_update_bits(codec, TAS5722_DIGITAL_CTRL2_REG,
+ TAS5722_VOL_CONTROL_LSB, sel);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new tas5722_snd_controls[] = {
+ SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume",
+ 0, 0, 511, 0,
+ tas5722_volume_get, tas5722_volume_set,
+ tas5722_dac_tlv),
SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
};
@@ -528,6 +576,22 @@ static const struct snd_soc_codec_driver soc_codec_dev_tas5720 = {
},
};
+static struct snd_soc_codec_driver soc_codec_dev_tas5722 = {
+ .probe = tas5720_codec_probe,
+ .remove = tas5720_codec_remove,
+ .suspend = tas5720_suspend,
+ .resume = tas5720_resume,
+
+ .component_driver = {
+ .controls = tas5722_snd_controls,
+ .num_controls = ARRAY_SIZE(tas5722_snd_controls),
+ .dapm_widgets = tas5720_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
+ .dapm_routes = tas5720_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
+ }
+};
+
/* PCM rates supported by the TAS5720 driver */
#define TAS5720_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
@@ -614,9 +678,23 @@ static int tas5720_probe(struct i2c_client *client,
dev_set_drvdata(dev, data);
- ret = snd_soc_register_codec(&client->dev,
- &soc_codec_dev_tas5720,
- tas5720_dai, ARRAY_SIZE(tas5720_dai));
+ switch (id->driver_data) {
+ case TAS5720:
+ ret = snd_soc_register_codec(&client->dev,
+ &soc_codec_dev_tas5720,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
+ case TAS5722:
+ ret = snd_soc_register_codec(&client->dev,
+ &soc_codec_dev_tas5722,
+ tas5720_dai,
+ ARRAY_SIZE(tas5720_dai));
+ break;
+ default:
+ dev_err(dev, "unexpected private driver data\n");
+ return -EINVAL;
+ }
if (ret < 0) {
dev_err(dev, "failed to register codec: %d\n", ret);
return ret;
--
2.15.0
Powered by blists - more mailing lists