lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 12 Dec 2017 09:02:08 -0800
From:   Atul Garg <agarg@...san.com>
To:     agarg@...san.com, linux-mmc@...r.kernel.org, kishon@...com,
        rk@...com, nm@...com, nsekhar@...com, ulf.hansson@...aro.org,
        adrian.hunter@...el.com
Cc:     linux-kernel@...r.kernel.org
Subject: [PATCH V5] mmc:host:sdhci-pci:Addition of Arasan PCI Controller with integrated phy.

The Arasan Controller is based on a FPGA platform and has integrated phy
with specific registers used during initialization and
management of different modes. The phy and the controller are integrated
and registers are very specific to Arasan.

Arasan being an IP provider, licenses these IPs to various companies for
integration of IP in custom SOCs. The custom SOCs define own register
map depending on how bits are tied inside the SOC for phy registers,
depending on SOC memory plan and hence will require own platform drivers.

If more details on phy regsiters are required, an interface document is
hosted at https: //arasandotcom/NF/eMMC5.1 PHY Programming in Linux.pdf.

Signed-off-by: Atul Garg <agarg@...san.com>
---
V5 - Separated arasan_phy_poll function into arasan_phy_addr_poll and 
arasan_phy_sts_poll  Tabspace corrected. Checked return values of poll functions.
Removed static declaration of sdhci_pci_enable_dma and defined in
sdhci-pci.h as suggested by Adrian Hunter <adrian.hunter@...el.com>.
V4 - Created arasan_phy_poll function to have common timeout call.
.Restructured arasan_set_phy to arasan_select_phy_clock and
.arasan_phy_set to have single set of registers to be programmed for different modes.
.Applied code style suggestions from Adrian Hunter <adrian.hunter@...el.com>.
V3 - Removed sdhci-pci-arasan.h. Code and interface document mentioned
above are made relevant..Applied code style suggestions from
Sekhar Nori <nsekhar@...com> and .Adrian Hunter <adrian.hunter@...el.com>.
V2 - Removed code from sdhci-pci-core.c and created sdhci-pci-arasan.c and
.sdhci-pci-arasan.h.
V1 - Initial Patch coded in sdhci-pci-core.c.

 drivers/mmc/host/Makefile           |   2 +-
 drivers/mmc/host/sdhci-pci-arasan.c | 341 ++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-pci-core.c   |   4 +-
 drivers/mmc/host/sdhci-pci.h        |   7 +-
 4 files changed, 350 insertions(+), 4 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-pci-arasan.c

diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ab61a3e..6781b81 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
 obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
-sdhci-pci-y			+= sdhci-pci-core.o sdhci-pci-o2micro.o
+sdhci-pci-y			+= sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o
 obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-data.o
 obj-$(CONFIG_MMC_SDHCI_ACPI)	+= sdhci-acpi.o
 obj-$(CONFIG_MMC_SDHCI_PXAV3)	+= sdhci-pxav3.o
diff --git a/drivers/mmc/host/sdhci-pci-arasan.c b/drivers/mmc/host/sdhci-pci-arasan.c
new file mode 100644
index 0000000..9df64a1
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-arasan.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2017 Arasan Chip Systems Inc.
+ *
+ * Author: Atul Garg <agarg@...san.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+
+/* Extra registers for Arasan SD Host Controller for eMMC5.1 PHY */
+#define PHY_ADDR_REG	0x300
+#define PHY_DAT_REG	0x304
+
+#define PHY_WRITE	BIT(8)
+#define PHY_BUSY	BIT(9)
+#define DATA_MASK	0xFF
+
+/* eMMC5.1 PHY Specific Registers */
+#define DLL_STS	0x00
+#define IPAD_CTRL1	0x01
+#define IPAD_CTRL2	0x02
+#define IPAD_STS	0x03
+#define IOREN_CTRL1	0x06
+#define IOREN_CTRL2	0x07
+#define IOPU_CTRL1	0x08
+#define IOPU_CTRL2	0x09
+#define ITAP_DELAY	0x0C
+#define OTAP_DELAY	0x0D
+#define STRB_SEL	0x0E
+#define CLKBUF_SEL	0x0F
+#define MODE_CTRL	0x11
+#define DLL_TRIM	0x12
+#define CMD_CTRL	0x20
+#define DATA_CTRL	0x21
+#define STRB_CTRL	0x22
+#define CLK_CTRL	0x23
+#define PHY_CTRL	0x24
+
+#define DLL_EN		BIT(3)
+#define RTRIM_EN	BIT(1)
+#define PDB_EN		BIT(1)
+#define RETB_EN	BIT(6)
+#define ODEN_CMD	BIT(1)
+#define ODEN_DAT	0xFF
+#define REN_STRB	BIT(0)
+#define REN_CMD	BIT(1)
+#define REN_DAT	0xFF
+#define PU_CMD		BIT(1)
+#define PU_DAT		0xFF
+#define ITAPDLY_EN	BIT(0)
+#define OTAPDLY_EN	BIT(0)
+#define OD_REL_CMD	BIT(1)
+#define OD_REL_DAT	0xFF
+#define DLLTRM_ICP	0x8
+#define PDB_CMD	BIT(0)
+#define PDB_DAT	0xFF
+#define PDB_STRB	BIT(0)
+#define PDB_CLK	BIT(0)
+#define CALDONE_MASK	0x10
+#define DLL_RDY_MASK	0x10
+#define MAX_CLK_BUF	0x7
+
+/* Mode Controls */
+#define ENHSTRB_MODE	BIT(0)
+#define HS400_MODE	BIT(1)
+#define LEGACY_MODE	BIT(2)
+#define DDR50_MODE	BIT(3)
+
+/*
+ * Controller has no specific bits for HS/HS200.
+ * Used BIT(4), BIT(5) for software programming.
+ */
+#define HS200_MODE	BIT(4)
+#define HS_MODE	BIT(5)
+
+#define OTAPDLY(x)	((x << 1) | OTAPDLY_EN)
+#define ITAPDLY(x)	((x << 1) | ITAPDLY_EN)
+#define FREQSEL(x)	((x << 5) | DLL_EN)
+#define IOPAD(x, y)	((x) | (y << 2))
+
+/* Arasan private data */
+struct arasan_host {
+	u32 chg_clk;
+};
+
+static int arasan_phy_addr_poll(struct sdhci_host *host, u32 offset, u32 mask)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), 100);
+	bool failed;
+	u8 val = 0;
+
+	while (1) {
+		failed = ktime_after(ktime_get(), timeout);
+		val = sdhci_readw(host, PHY_ADDR_REG);
+		if (!(val & mask))
+			return 0;
+		if (failed)
+			return -EBUSY;
+	}
+}
+
+static int arasan_phy_write(struct sdhci_host *host, u8 data, u8 offset)
+{
+	int ret;
+
+	sdhci_writew(host, data, PHY_DAT_REG);
+	sdhci_writew(host, (PHY_WRITE | offset), PHY_ADDR_REG);
+	ret = arasan_phy_addr_poll(host, PHY_ADDR_REG, PHY_BUSY);
+	return ret;
+}
+
+static int arasan_phy_read(struct sdhci_host *host, u8 offset, u8 *data)
+{
+	int ret;
+
+	sdhci_writew(host, 0, PHY_DAT_REG);
+	sdhci_writew(host, offset, PHY_ADDR_REG);
+	ret = arasan_phy_addr_poll(host, PHY_ADDR_REG, PHY_BUSY);
+
+	/* Masking valid data bits */
+	*data = sdhci_readw(host, PHY_DAT_REG) & DATA_MASK;
+	return ret;
+}
+
+static int arasan_phy_sts_poll(struct sdhci_host *host, u32 offset, u32 mask)
+{
+	int ret;
+	ktime_t timeout = ktime_add_us(ktime_get(), 100);
+	bool failed;
+	u8 val = 0;
+
+	while (1) {
+		failed = ktime_after(ktime_get(), timeout);
+		ret = arasan_phy_read(host, offset, &val);
+		if (ret)
+			return -EBUSY;
+		else if (val & mask)
+			return 0;
+		if (failed)
+			return -EBUSY;
+	}
+}
+
+/* Initialize the Arasan PHY */
+static int arasan_phy_init(struct sdhci_host *host)
+{
+	int ret;
+	u8 val;
+
+	/* Program IOPADs and wait for calibration to be done */
+	if (arasan_phy_read(host, IPAD_CTRL1, &val) ||
+	    arasan_phy_write(host, val | RETB_EN | PDB_EN, IPAD_CTRL1) ||
+	    arasan_phy_read(host, IPAD_CTRL2, &val) ||
+	    arasan_phy_write(host, val | RTRIM_EN, IPAD_CTRL2))
+		return -EBUSY;
+	ret = arasan_phy_sts_poll(host, IPAD_STS, CALDONE_MASK);
+	if (ret)
+		return -EBUSY;
+
+	/* Program CMD/Data lines */
+	if (arasan_phy_read(host, IOREN_CTRL1, &val) ||
+	    arasan_phy_write(host, val | REN_CMD | REN_STRB, IOREN_CTRL1) ||
+	    arasan_phy_read(host, IOPU_CTRL1, &val) ||
+	    arasan_phy_write(host, val | PU_CMD, IOPU_CTRL1) ||
+	    arasan_phy_read(host, CMD_CTRL, &val) ||
+	    arasan_phy_write(host, val | PDB_CMD, CMD_CTRL) ||
+	    arasan_phy_read(host, IOREN_CTRL2, &val) ||
+	    arasan_phy_write(host, val | REN_DAT, IOREN_CTRL2) ||
+	    arasan_phy_read(host, IOPU_CTRL2, &val) ||
+	    arasan_phy_write(host, val | PU_DAT, IOPU_CTRL2) ||
+	    arasan_phy_read(host, DATA_CTRL, &val) ||
+	    arasan_phy_write(host, val | PDB_DAT, DATA_CTRL) ||
+	    arasan_phy_read(host, STRB_CTRL, &val) ||
+	    arasan_phy_write(host, val | PDB_STRB, STRB_CTRL) ||
+	    arasan_phy_read(host, CLK_CTRL, &val) ||
+	    arasan_phy_write(host, val | PDB_CLK, CLK_CTRL) ||
+	    arasan_phy_read(host, CLKBUF_SEL, &val) ||
+	    arasan_phy_write(host, val | MAX_CLK_BUF, CLKBUF_SEL) ||
+	    arasan_phy_write(host, LEGACY_MODE, MODE_CTRL))
+		return -EBUSY;
+	return 0;
+}
+
+/* Set Arasan PHY for different modes */
+static int arasan_phy_set(struct sdhci_host *host, u8 mode, u8 otap,
+			  u8 drv_type, u8 itap, u8 trim, u8 clk)
+{
+	u8 val;
+	int ret;
+
+	if (mode == HS_MODE || mode == HS200_MODE)
+		ret = arasan_phy_write(host, 0x0, MODE_CTRL);
+	else
+		ret = arasan_phy_write(host, mode, MODE_CTRL);
+	if (ret)
+		return ret;
+	if (mode == HS400_MODE || mode == HS200_MODE) {
+		ret = arasan_phy_read(host, IPAD_CTRL1, &val);
+		if (ret)
+			return ret;
+		ret = arasan_phy_write(host, IOPAD(val, drv_type), IPAD_CTRL1);
+		if (ret)
+			return ret;
+	}
+	if (mode == LEGACY_MODE) {
+		ret = arasan_phy_write(host, 0x0, OTAP_DELAY);
+		if (ret)
+			return ret;
+		ret = arasan_phy_write(host, 0x0, ITAP_DELAY);
+	} else {
+		ret = arasan_phy_write(host, OTAPDLY(otap), OTAP_DELAY);
+		if (ret)
+			return ret;
+		if (mode != HS200_MODE)
+			ret = arasan_phy_write(host, ITAPDLY(itap), ITAP_DELAY);
+		else
+			ret = arasan_phy_write(host, 0x0, ITAP_DELAY);
+	}
+	if (ret)
+		return ret;
+	if (mode != LEGACY_MODE) {
+		ret = arasan_phy_write(host, trim, DLL_TRIM);
+		if (ret)
+			return ret;
+	}
+	ret = arasan_phy_write(host, 0, DLL_STS);
+	if (ret)
+		return ret;
+	if (mode != LEGACY_MODE) {
+		ret = arasan_phy_write(host, FREQSEL(clk), DLL_STS);
+		if (ret)
+			return ret;
+		ret = arasan_phy_sts_poll(host, DLL_STS, DLL_RDY_MASK);
+		if (ret)
+			return -EBUSY;
+	}
+	return 0;
+}
+
+static int arasan_select_phy_clock(struct sdhci_host *host)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct arasan_host *arasan_host = sdhci_pci_priv(slot);
+	u8 clk;
+
+	if (arasan_host->chg_clk == host->mmc->ios.clock)
+		return 0;
+
+	arasan_host->chg_clk = host->mmc->ios.clock;
+	if (host->mmc->ios.clock == 200000000)
+		clk = 0x0;
+	else if (host->mmc->ios.clock == 100000000)
+		clk = 0x2;
+	else if (host->mmc->ios.clock == 50000000)
+		clk = 0x1;
+	else
+		clk = 0x0;
+
+	if (host->mmc_host_ops.hs400_enhanced_strobe) {
+		arasan_phy_set(host, ENHSTRB_MODE, 1, 0x0, 0x0,
+			       DLLTRM_ICP, clk);
+	} else {
+		switch (host->mmc->ios.timing) {
+		case MMC_TIMING_LEGACY:
+			arasan_phy_set(host, LEGACY_MODE, 0x0, 0x0, 0x0,
+				       0x0, 0x0);
+			break;
+		case MMC_TIMING_MMC_HS:
+		case MMC_TIMING_SD_HS:
+			arasan_phy_set(host, HS_MODE, 0x3, 0x0, 0x2,
+				       DLLTRM_ICP, clk);
+			break;
+		case MMC_TIMING_MMC_HS200:
+		case MMC_TIMING_UHS_SDR104:
+			arasan_phy_set(host, HS200_MODE, 0x2,
+				       host->mmc->ios.drv_type, 0x0,
+				       DLLTRM_ICP, clk);
+			break;
+		case MMC_TIMING_MMC_DDR52:
+		case MMC_TIMING_UHS_DDR50:
+			arasan_phy_set(host, DDR50_MODE, 0x1, 0x0,
+				       0x0, DLLTRM_ICP, clk);
+			break;
+		case MMC_TIMING_MMC_HS400:
+			arasan_phy_set(host, HS400_MODE, 0x1,
+				       host->mmc->ios.drv_type, 0xa,
+				       DLLTRM_ICP, clk);
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+static int arasan_pci_probe_slot(struct sdhci_pci_slot *slot)
+{
+	int err;
+
+	slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_8_BIT_DATA;
+	err = arasan_phy_init(slot->host);
+	if (err)
+		return -ENODEV;
+	return 0;
+}
+
+static void arasan_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	sdhci_set_clock(host, clock);
+
+	/* Change phy settings for the new clock */
+	arasan_select_phy_clock(host);
+}
+
+static const struct sdhci_ops arasan_sdhci_pci_ops = {
+	.set_clock	= arasan_sdhci_set_clock,
+	.enable_dma	= sdhci_pci_enable_dma,
+	.set_bus_width	= sdhci_set_bus_width,
+	.reset		= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+};
+
+const struct sdhci_pci_fixes sdhci_arasan = {
+	.probe_slot	= arasan_pci_probe_slot,
+	.ops		= &arasan_sdhci_pci_ops,
+	.priv_size	= sizeof(struct arasan_host),
+};
+
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 3e4f04f..fc2859f 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -33,7 +33,6 @@
 #include "sdhci.h"
 #include "sdhci-pci.h"
 
-static int sdhci_pci_enable_dma(struct sdhci_host *host);
 static void sdhci_pci_hw_reset(struct sdhci_host *host);
 
 #ifdef CONFIG_PM_SLEEP
@@ -1306,6 +1305,7 @@ static const struct pci_device_id pci_ids[] = {
 	SDHCI_PCI_DEVICE(O2, SDS1,     o2),
 	SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
 	SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
+	SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
 	SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
 	/* Generic SD host controller */
 	{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
@@ -1320,7 +1320,7 @@ MODULE_DEVICE_TABLE(pci, pci_ids);
  *                                                                           *
 \*****************************************************************************/
 
-static int sdhci_pci_enable_dma(struct sdhci_host *host)
+int sdhci_pci_enable_dma(struct sdhci_host *host)
 {
 	struct sdhci_pci_slot *slot;
 	struct pci_dev *pdev;
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 063506c..657d8c6 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -54,6 +54,9 @@
 
 #define PCI_SUBDEVICE_ID_NI_7884	0x7884
 
+#define PCI_VENDOR_ID_ARASAN	0x16e6
+#define PCI_DEVICE_ID_ARASAN_PHY_EMMC	0x0670
+
 /*
  * PCI device class and mask
  */
@@ -169,11 +172,13 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot)
 #ifdef CONFIG_PM_SLEEP
 int sdhci_pci_resume_host(struct sdhci_pci_chip *chip);
 #endif
-
+int sdhci_pci_enable_dma(struct sdhci_host *host);
 int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
 int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
 #ifdef CONFIG_PM_SLEEP
 int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
 #endif
 
+extern const struct sdhci_pci_fixes sdhci_arasan;
+
 #endif /* __SDHCI_PCI_H */
-- 
2.7.4


-- 
ATTENTION: 

The information contained in this message may be legally privileged and 
confidential.  It is intended to be read only by the individual or entity 
to whom it is addressed or by their designee. If the reader of this message 
is not the intended recipient, you are on notice that any distribution of 
this message, in any form, is strictly prohibited by law.


If you have received this message in error, please immediately notify the 
sender and/or Arasan Chip Systems, Inc. by telephone at (408) 282-1600 and 
delete or destroy any copy of this message.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ