| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1513207108-30430-4-git-send-email-nicoleotsuka@gmail.com>
Date: Wed, 13 Dec 2017 15:18:20 -0800
From: Nicolin Chen <nicoleotsuka@...il.com>
To: broonie@...nel.org
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
alsa-devel@...a-project.org, fabio.estevam@....com, timur@...i.org,
mail@...iej.szmigiero.name, caleb@...me.org, lgirdwood@...il.com,
arnaud.mouiche@...oxia.com, lukma@...x.de, kernel@...gutronix.de
Subject: [PATCH v3 03/11] ASoC: fsl_ssi: Refine all comments
This patch refines the comments by:
1) Removing all out-of-date comments
2) Removing all not-so-useful comments
3) Unifying the styles of all comments
4) Simplifying over-descriptive comments
5) Adding comments to improve code readablity
6) Moving all register related comments to fsl_ssi.h
7) Adding comments to all register and field defines
Signed-off-by: Nicolin Chen <nicoleotsuka@...il.com>
Tested-by: Maciej S. Szmigiero <mail@...iej.szmigiero.name>
Reviewed-by: Maciej S. Szmigiero <mail@...iej.szmigiero.name>
---
Changelog
v2->v3
* Revised a comment in hw_params() by taking Maciej's advice
v1->v2
* Added some new comments at "SoC specific data" to be more precise
* Revised one comment in fsl_ssi_config()
* Revised the comment of fsl_ssi_setup_reg_vals()
* Added one comment for AC97 in fsl_ssi_setup_reg_vals()
* Revised the comment of fsl_ssi_hw_params() to be more precise
* Added some comments in _fsl_ssi_set_dai_fmt() to help understand
the formats
* Added one comment in fsl_ssi_set_dai_fmt() to explain why AC97
needs to bypass it
* Revised comments in fsl_ssi_set_dai_tdm_slot() to be more precise
* Revised comments around dual FIFO code in fsl_ssi_imx_probe() to
be more precise
sound/soc/fsl/fsl_ssi.c | 377 +++++++++++++++-----------------------------
sound/soc/fsl/fsl_ssi.h | 67 +++++++-
sound/soc/fsl/fsl_ssi_dbg.c | 12 +-
3 files changed, 191 insertions(+), 265 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index e903c92..fe11a23 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -187,42 +187,48 @@ struct fsl_ssi_soc_data {
/**
* fsl_ssi: per-SSI private data
*
- * @reg: Pointer to the regmap registers
+ * @regs: Pointer to the regmap registers
* @irq: IRQ of this SSI
* @cpu_dai_drv: CPU DAI driver for this device
*
* @dai_fmt: DAI configuration this device is currently used with
- * @i2s_mode: i2s and network mode configuration of the device. Is used to
- * switch between normal and i2s/network mode
- * mode depending on the number of channels
+ * @i2s_mode: I2S and Network mode configuration of SCR register
* @use_dma: DMA is used or FIQ with stream filter
- * @use_dual_fifo: DMA with support for both FIFOs used
- * @fifo_deph: Depth of the SSI FIFOs
- * @slot_width: width of each DAI slot
- * @slots: number of slots
- * @rxtx_reg_val: Specific register settings for receive/transmit configuration
+ * @use_dual_fifo: DMA with support for dual FIFO mode
+ * @has_ipg_clk_name: If "ipg" is in the clock name list of device tree
+ * @fifo_depth: Depth of the SSI FIFOs
+ * @slot_width: Width of each DAI slot
+ * @slots: Number of slots
+ * @rxtx_reg_val: Specific RX/TX register settings
*
- * @clk: SSI clock
- * @baudclk: SSI baud clock for master mode
+ * @clk: Clock source to access register
+ * @baudclk: Clock source to generate bit and frame-sync clocks
* @baudclk_streams: Active streams that are using baudclk
*
+ * @regcache_sfcsr: Cache sfcsr register value during suspend and resume
+ * @regcache_sacnt: Cache sacnt register value during suspend and resume
+ *
* @dma_params_tx: DMA transmit parameters
* @dma_params_rx: DMA receive parameters
* @ssi_phys: physical address of the SSI registers
*
* @fiq_params: FIQ stream filtering parameters
*
- * @pdev: Pointer to pdev used for deprecated fsl-ssi sound card
+ * @pdev: Pointer to pdev when using fsl-ssi as sound card (ppc only)
+ * TODO: Should be replaced with simple-sound-card
*
* @dbg_stats: Debugging statistics
*
* @soc: SoC specific data
+ * @dev: Pointer to &pdev->dev
+ *
+ * @fifo_watermark: The FIFO watermark setting. Notifies DMA when there are
+ * @fifo_watermark or fewer words in TX fifo or
+ * @fifo_watermark or more empty words in RX fifo.
+ * @dma_maxburst: Max number of words to transfer in one go. So far,
+ * this is always the same as fifo_watermark.
*
- * @fifo_watermark: the FIFO watermark setting. Notifies DMA when
- * there are @fifo_watermark or fewer words in TX fifo or
- * @fifo_watermark or more empty words in RX fifo.
- * @dma_maxburst: max number of words to transfer in one go. So far,
- * this is always the same as fifo_watermark.
+ * @ac97_reg_lock: Mutex lock to serialize AC97 register access operations
*/
struct fsl_ssi {
struct regmap *regs;
@@ -243,20 +249,15 @@ struct fsl_ssi {
struct clk *baudclk;
unsigned int baudclk_streams;
- /* regcache for volatile regs */
u32 regcache_sfcsr;
u32 regcache_sacnt;
- /* DMA params */
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
dma_addr_t ssi_phys;
- /* params for non-dma FIQ stream filtered mode */
struct imx_pcm_fiq_params fiq_params;
- /* Used when using fsl-ssi as sound-card. This is only used by ppc and
- * should be replaced with simple-sound-card. */
struct platform_device *pdev;
struct fsl_ssi_dbg dbg_stats;
@@ -271,19 +272,19 @@ struct fsl_ssi {
};
/*
- * imx51 and later SoCs have a slightly different IP that allows the
- * SSI configuration while the SSI unit is running.
- *
- * More important, it is necessary on those SoCs to configure the
- * sperate TX/RX DMA bits just before starting the stream
- * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi
- * sends any DMA requests to the SDMA unit, otherwise it is not defined
- * how the SDMA unit handles the DMA request.
+ * SoC specific data
*
- * SDMA units are present on devices starting at imx35 but the imx35
- * reference manual states that the DMA bits should not be changed
- * while the SSI unit is running (SSIEN). So we support the necessary
- * online configuration of fsl-ssi starting at imx51.
+ * Notes:
+ * 1) SSI in earlier SoCS has crtical bits in control registers that
+ * cannot be changed after SSI starts running -- a software reset
+ * (set SSIEN to 0) is required to change their values. So adding
+ * an offline_config flag for these SoCs.
+ * 2) SDMA is available since imx35. However, imx35 does not support
+ * DMA bits changing when SSI is running, so set offline_config.
+ * 3) imx51 and later versions support register configurations when
+ * SSI is running (SSIEN); For these versions, DMA needs to be
+ * configured before SSI sends DMA request to avoid an undefined
+ * DMA request on the SDMA side.
*/
static struct fsl_ssi_soc_data fsl_ssi_mpc8610 = {
@@ -342,18 +343,7 @@ static bool fsl_ssi_is_i2s_cbm_cfs(struct fsl_ssi *ssi)
return (ssi->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
SND_SOC_DAIFMT_CBM_CFS;
}
-/**
- * fsl_ssi_isr: SSI interrupt handler
- *
- * Although it's possible to use the interrupt handler to send and receive
- * data to/from the SSI, we use the DMA instead. Programming is more
- * complicated, but the performance is much better.
- *
- * This interrupt handler is used only to gather statistics.
- *
- * @irq: IRQ of the SSI device
- * @dev_id: pointer to the fsl_ssi structure for this SSI device
- */
+
static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
{
struct fsl_ssi *ssi = dev_id;
@@ -361,10 +351,6 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
__be32 sisr;
__be32 sisr2;
- /* We got an interrupt, so read the status register to see what we
- were interrupted for. We mask it with the Interrupt Enable register
- so that we only check for events that we're interested in.
- */
regmap_read(regs, CCSR_SSI_SISR, &sisr);
sisr2 = sisr & ssi->soc->sisr_write_mask;
@@ -377,8 +363,8 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-/*
- * Enable/Disable all rx/tx config flags at once.
+/**
+ * Enable or disable all rx/tx config flags at once
*/
static void fsl_ssi_rxtx_config(struct fsl_ssi *ssi, bool enable)
{
@@ -405,13 +391,8 @@ static void fsl_ssi_rxtx_config(struct fsl_ssi *ssi, bool enable)
}
}
-/*
- * Clear RX or TX FIFO to remove samples from the previous
- * stream session which may be still present in the FIFO and
- * may introduce bad samples and/or channel slipping.
- *
- * Note: The SOR is not documented in recent IMX datasheet, but
- * is described in IMX51 reference manual at section 56.3.3.15.
+/**
+ * Clear remaining data in the FIFO to avoid dirty data or channel slipping
*/
static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx)
{
@@ -424,7 +405,7 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx)
}
}
-/*
+/**
* Calculate the bits that have to be disabled for the current stream that is
* getting disabled. This keeps the bits enabled that are necessary for the
* second stream to work if 'stream_active' is true.
@@ -444,9 +425,8 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx)
((vals_disable) & \
((vals_disable) ^ ((vals_stream) * (u32)!!(stream_active))))
-/*
- * Enable/Disable a ssi configuration. You have to pass either
- * ssi->rxtx_reg_val.rx or tx as vals parameter.
+/**
+ * Enable or disable SSI configuration.
*/
static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
struct fsl_ssi_reg_val *vals)
@@ -467,24 +447,23 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
else
keep_active = 0;
- /* Find the other direction values rx or tx which we do not want to
- * modify */
+ /* Get the opposite direction to keep its values untouched */
if (&ssi->rxtx_reg_val.rx == vals)
avals = &ssi->rxtx_reg_val.tx;
else
avals = &ssi->rxtx_reg_val.rx;
- /* If vals should be disabled, start with disabling the unit */
if (!enable) {
+ /* Exclude necessary bits for the opposite stream */
u32 scr = fsl_ssi_disable_val(vals->scr, avals->scr,
keep_active);
+ /* Safely disable SCR register for the stream */
regmap_update_bits(regs, CCSR_SSI_SCR, scr, 0);
}
/*
- * We are running on a SoC which does not support online SSI
- * reconfiguration, so we have to enable all necessary flags at once
- * even if we do not use them later (capture and playback configuration)
+ * Online configuration is not supported
+ * Enable or Disable all necessary bits at once
*/
if (ssi->soc->offline_config) {
if ((enable && !nr_active_streams) ||
@@ -494,10 +473,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
goto config_done;
}
- /*
- * Configure single direction units while the SSI unit is running
- * (online configuration)
- */
+ /* Online configure single direction while SSI is running */
if (enable) {
fsl_ssi_fifo_clear(ssi, vals->scr & CCSR_SSI_SCR_RE);
@@ -509,16 +485,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
u32 srcr;
u32 stcr;
- /*
- * Disabling the necessary flags for one of rx/tx while the
- * other stream is active is a little bit more difficult. We
- * have to disable only those flags that differ between both
- * streams (rx XOR tx) and that are set in the stream that is
- * disabled now. Otherwise we could alter flags of the other
- * stream
- */
-
- /* These assignments are simply vals without bits set in avals*/
+ /* Exclude necessary bits for the opposite stream */
sier = fsl_ssi_disable_val(vals->sier, avals->sier,
keep_active);
srcr = fsl_ssi_disable_val(vals->srcr, avals->srcr,
@@ -526,6 +493,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
stcr = fsl_ssi_disable_val(vals->stcr, avals->stcr,
keep_active);
+ /* Safely disable other control registers for the stream */
regmap_update_bits(regs, CCSR_SSI_SRCR, srcr, 0);
regmap_update_bits(regs, CCSR_SSI_STCR, stcr, 0);
regmap_update_bits(regs, CCSR_SSI_SIER, sier, 0);
@@ -534,26 +502,17 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
config_done:
/* Enabling of subunits is done after configuration */
if (enable) {
+ /* Start DMA before setting TE to avoid underrun */
+ /* TODO: FIQ cases might also need this upon testing */
if (ssi->use_dma && (vals->scr & CCSR_SSI_SCR_TE)) {
- /*
- * Be sure the Tx FIFO is filled when TE is set.
- * Otherwise, there are some chances to start the
- * playback with some void samples inserted first,
- * generating a channel slip.
- *
- * First, SSIEN must be set, to let the FIFO be filled.
- *
- * Notes:
- * - Limit this fix to the DMA case until FIQ cases can
- * be tested.
- * - Limit the length of the busy loop to not lock the
- * system too long, even if 1-2 loops are sufficient
- * in general.
- */
int i;
int max_loop = 100;
+
+ /* Enable SSI first to send TX DMA request */
regmap_update_bits(regs, CCSR_SSI_SCR,
CCSR_SSI_SCR_SSIEN, CCSR_SSI_SCR_SSIEN);
+
+ /* Wait until TX FIFO not empty -- DMA working */
for (i = 0; i < max_loop; i++) {
u32 sfcsr;
regmap_read(regs, CCSR_SSI_SFCSR, &sfcsr);
@@ -565,6 +524,7 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
"Timeout waiting TX FIFO filling\n");
}
}
+ /* Enable all remaining bits */
regmap_update_bits(regs, CCSR_SSI_SCR, vals->scr, vals->scr);
}
}
@@ -581,20 +541,9 @@ static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi *ssi)
/* no SACC{ST,EN,DIS} regs on imx21-class SSI */
if (!ssi->soc->imx21regs) {
- /*
- * Note that these below aren't just normal registers.
- * They are a way to disable or enable bits in SACCST
- * register:
- * - writing a '1' bit at some position in SACCEN sets the
- * relevant bit in SACCST,
- * - writing a '1' bit at some position in SACCDIS unsets
- * the relevant bit in SACCST register.
- *
- * The two writes below first disable all channels slots,
- * then enable just slots 3 & 4 ("PCM Playback Left Channel"
- * and "PCM Playback Right Channel").
- */
+ /* Disable all channel slots */
regmap_write(regs, CCSR_SSI_SACCDIS, 0xff);
+ /* Enable slots 3 & 4 -- PCM Playback Left & Right channels */
regmap_write(regs, CCSR_SSI_SACCEN, 0x300);
}
}
@@ -602,23 +551,11 @@ static void fsl_ssi_tx_ac97_saccst_setup(struct fsl_ssi *ssi)
static void fsl_ssi_tx_config(struct fsl_ssi *ssi, bool enable)
{
/*
- * Why are we setting up SACCST everytime we are starting a
- * playback?
- * Some CODECs (like VT1613 CODEC on UDOO board) like to
- * (sometimes) set extra bits in their SLOTREQ requests.
- * When a bit is set in a SLOTREQ request then SSI sets the
- * relevant bit in SACCST automatically (it is enough if a bit was
- * set in a SLOTREQ just once, bits in SACCST are 'sticky').
- * If an extra slot gets enabled that's a disaster for playback
- * because some of normal left or right channel samples are
- * redirected instead to this extra slot.
+ * SACCST might be modified via AC Link by a CODEC if it sends
+ * extra bits in their SLOTREQ requests, which'll accidentally
+ * send valid data to slots other than normal playback slots.
*
- * A workaround implemented in fsl-asoc-card of setting an
- * appropriate CODEC register so that slots 3 & 4 (the normal
- * stereo playback slots) are used for S/PDIF seems to mostly fix
- * this issue on the UDOO board but since this CODEC is so
- * untrustworthy let's play safe here and make sure that no extra
- * slots are enabled every time a playback is started.
+ * To be safe, configure SACCST right before TX starts.
*/
if (enable && fsl_ssi_is_ac97(ssi))
fsl_ssi_tx_ac97_saccst_setup(ssi);
@@ -626,10 +563,8 @@ static void fsl_ssi_tx_config(struct fsl_ssi *ssi, bool enable)
fsl_ssi_config(ssi, enable, &ssi->rxtx_reg_val.tx);
}
-/*
- * Setup rx/tx register values used to enable/disable the streams. These will
- * be used later in fsl_ssi_config to setup the streams without the need to
- * check for all different SSI modes.
+/**
+ * Cache critical bits of SIER, SRCR, STCR and SCR to later set them safely
*/
static void fsl_ssi_setup_reg_vals(struct fsl_ssi *ssi)
{
@@ -642,6 +577,7 @@ static void fsl_ssi_setup_reg_vals(struct fsl_ssi *ssi)
reg->tx.stcr = CCSR_SSI_STCR_TFEN0;
reg->tx.scr = 0;
+ /* AC97 has already enabled SSIEN, RE and TE, so ignore them */
if (!fsl_ssi_is_ac97(ssi)) {
reg->rx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE;
reg->tx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE;
@@ -663,24 +599,17 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi)
{
struct regmap *regs = ssi->regs;
- /*
- * Setup the clock control register
- */
+ /* Setup the clock control register */
regmap_write(regs, CCSR_SSI_STCCR,
CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13));
regmap_write(regs, CCSR_SSI_SRCCR,
CCSR_SSI_SxCCR_WL(17) | CCSR_SSI_SxCCR_DC(13));
- /*
- * Enable AC97 mode and startup the SSI
- */
+ /* Enable AC97 mode and startup the SSI */
regmap_write(regs, CCSR_SSI_SACNT,
CCSR_SSI_SACNT_AC97EN | CCSR_SSI_SACNT_FV);
- /*
- * Enable SSI, Transmit and Receive. AC97 has to communicate with the
- * codec before a stream is started.
- */
+ /* AC97 has to communicate with codec before starting a stream */
regmap_update_bits(regs, CCSR_SSI_SCR,
CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE,
CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE);
@@ -688,14 +617,6 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi *ssi)
regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_WAIT(3));
}
-/**
- * fsl_ssi_startup: create a new substream
- *
- * This is the first function called when a stream is opened.
- *
- * If this is the first stream open, then grab the IRQ and program most of
- * the SSI registers.
- */
static int fsl_ssi_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -707,7 +628,8 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
if (ret)
return ret;
- /* When using dual fifo mode, it is safer to ensure an even period
+ /*
+ * When using dual fifo mode, it is safer to ensure an even period
* size. If appearing to an odd number while DMA always starts its
* task from fifo0, fifo1 would be neglected at the end of each
* period. But SSI would still access fifo1 with an invalid data.
@@ -719,10 +641,6 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
return 0;
}
-/**
- * fsl_ssi_shutdown: shutdown the SSI
- *
- */
static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -734,7 +652,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
}
/**
- * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
+ * Configure Digital Audio Interface bit clock
*
* Note: This function can be only called when using SSI as DAI master
*
@@ -851,17 +769,15 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
}
/**
- * fsl_ssi_hw_params - program the sample size
+ * Configure SSI based on PCM hardware parameters
*
- * Most of the SSI registers have been programmed in the startup function,
- * but the word length must be programmed here. Unfortunately, programming
- * the SxCCR.WL bits requires the SSI to be temporarily disabled. This can
- * cause a problem with supporting simultaneous playback and capture. If
- * the SSI is already playing a stream, then that stream may be temporarily
- * stopped when you start capture.
- *
- * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the
- * clock master.
+ * Notes:
+ * 1) SxCCR.WL bits are critical bits that require SSI to be temporarily
+ * disabled on offline_config SoCs. Even for online configurable SoCs
+ * running in synchronous mode (both TX and RX use STCCR), it is not
+ * safe to re-configure them when both two streams start running.
+ * 2) SxCCR.PM, SxCCR.DIV2 and SxCCR.PSR bits will be configured in the
+ * fsl_ssi_set_bclk() if SSI is the DAI clock master.
*/
static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai)
@@ -879,8 +795,10 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
enabled = scr_val & CCSR_SSI_SCR_SSIEN;
/*
- * If we're in synchronous mode, and the SSI is already enabled,
- * then STCCR is already set properly.
+ * SSI is properly configured if it is enabled and running in
+ * the synchronous mode; Note that AC97 mode is an exception
+ * that should set separate configurations for STCCR and SRCCR
+ * despite running in the synchronous mode.
*/
if (enabled && ssi->cpu_dai_drv.symmetric_rates)
return 0;
@@ -902,10 +820,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
if (!fsl_ssi_is_ac97(ssi)) {
u8 i2smode;
- /*
- * Switch to normal net mode in order to have a frame sync
- * signal every 32 bits instead of 16 bits
- */
+ /* Normal + Network mode to send 16-bit data in 32-bit frames */
if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16)
i2smode = CCSR_SSI_SCR_I2S_MODE_NORMAL |
CCSR_SSI_SCR_NET;
@@ -917,16 +832,6 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
channels == 1 ? 0 : i2smode);
}
- /*
- * FIXME: The documentation says that SxCCR[WL] should not be
- * modified while the SSI is enabled. The only time this can
- * happen is if we're trying to do simultaneous playback and
- * capture in asynchronous mode. Unfortunately, I have been enable
- * to get that to work at all on the P1022DS. Therefore, we don't
- * bother to disable/enable the SSI when setting SxCCR[WL], because
- * the SSI will stop anyway. Maybe one day, this will get fixed.
- */
-
/* In synchronous mode, the SSI uses STCCR for capture */
if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
ssi->cpu_dai_drv.symmetric_rates)
@@ -972,6 +877,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
regmap_read(regs, CCSR_SSI_SCR, &scr);
scr &= ~(CCSR_SSI_SCR_SYN | CCSR_SSI_SCR_I2S_MODE_MASK);
+ /* Synchronize frame sync clock for TE to avoid data slipping */
scr |= CCSR_SSI_SCR_SYNC_TX_FS;
mask = CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR |
@@ -982,6 +888,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
stcr &= ~mask;
srcr &= ~mask;
+ /* Use Network mode as default */
ssi->i2s_mode = CCSR_SSI_SCR_NET;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
@@ -1022,6 +929,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
CCSR_SSI_STCR_TXBIT0;
break;
case SND_SOC_DAIFMT_AC97:
+ /* Data on falling edge of bclk, frame high, 1clk before data */
ssi->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_NORMAL;
break;
default:
@@ -1054,13 +962,16 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
/* DAI clock master masks */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
+ /* Output bit and frame sync clocks */
strcr |= CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR;
scr |= CCSR_SSI_SCR_SYS_CLK_EN;
break;
case SND_SOC_DAIFMT_CBM_CFM:
+ /* Input bit or frame sync clocks */
scr &= ~CCSR_SSI_SCR_SYS_CLK_EN;
break;
case SND_SOC_DAIFMT_CBM_CFS:
+ /* Input bit clock but output frame sync clock */
strcr &= ~CCSR_SSI_STCR_TXDIR;
strcr |= CCSR_SSI_STCR_TFDIR;
scr &= ~CCSR_SSI_SCR_SYS_CLK_EN;
@@ -1073,8 +984,8 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
stcr |= strcr;
srcr |= strcr;
+ /* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */
if (ssi->cpu_dai_drv.symmetric_rates || fsl_ssi_is_ac97(ssi)) {
- /* Need to clear RXDIR when using SYNC or AC97 mode */
srcr &= ~CCSR_SSI_SRCR_RXDIR;
scr |= CCSR_SSI_SCR_SYN;
}
@@ -1106,12 +1017,13 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
}
/**
- * fsl_ssi_set_dai_fmt - configure Digital Audio Interface Format.
+ * Configure Digital Audio Interface (DAI) Format
*/
static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
{
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
+ /* AC97 configured DAIFMT earlier in the probe() */
if (fsl_ssi_is_ac97(ssi))
return 0;
@@ -1119,9 +1031,7 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
}
/**
- * fsl_ssi_set_dai_tdm_slot - set TDM slot number
- *
- * Note: This function can be only called when using SSI as DAI master
+ * Set TDM slot number and slot width
*/
static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
u32 rx_mask, int slots, int slot_width)
@@ -1149,17 +1059,17 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
regmap_update_bits(regs, CCSR_SSI_SRCCR, CCSR_SSI_SxCCR_DC_MASK,
CCSR_SSI_SxCCR_DC(slots));
- /* The register SxMSKs needs SSI to provide essential clock due to
- * hardware design. So we here temporarily enable SSI to set them.
- */
+ /* Save SSIEN bit of the SCR register */
regmap_read(regs, CCSR_SSI_SCR, &val);
val &= CCSR_SSI_SCR_SSIEN;
+ /* Temporarily enable SSI to allow SxMSKs to be configurable */
regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN,
CCSR_SSI_SCR_SSIEN);
regmap_write(regs, CCSR_SSI_STMSK, ~tx_mask);
regmap_write(regs, CCSR_SSI_SRMSK, ~rx_mask);
+ /* Restore the value of SSIEN bit */
regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val);
ssi->slot_width = slot_width;
@@ -1169,13 +1079,7 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
}
/**
- * fsl_ssi_trigger: start and stop the DMA transfer.
- *
- * This function is called by ALSA to start, stop, pause, and resume the DMA
- * transfer of data.
- *
- * The DMA channel is in external master start and pause mode, which
- * means the SSI completely controls the flow of data.
+ * Start or stop SSI and corresponding DMA transaction.
*/
static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
@@ -1207,6 +1111,7 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
return -EINVAL;
}
+ /* Clear corresponding FIFO */
if (fsl_ssi_is_ac97(ssi)) {
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
regmap_write(regs, CCSR_SSI_SOR, CCSR_SSI_SOR_TX_CLR);
@@ -1239,7 +1144,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
.trigger = fsl_ssi_trigger,
};
-/* Template for the CPU dai driver structure */
static struct snd_soc_dai_driver fsl_ssi_dai_template = {
.probe = fsl_ssi_dai_probe,
.playback = {
@@ -1383,6 +1287,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
u32 dmas[4];
int ret;
+ /* Backward compatible for a DT without ipg clock name assigned */
if (ssi->has_ipg_clk_name)
ssi->clk = devm_clk_get(dev, "ipg");
else
@@ -1393,6 +1298,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
return ret;
}
+ /* Enable the clock since regmap will not handle it in this case */
if (!ssi->has_ipg_clk_name) {
ret = clk_prepare_enable(ssi->clk);
if (ret) {
@@ -1401,9 +1307,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
}
}
- /* For those SLAVE implementations, we ignore non-baudclk cases
- * and, instead, abandon MASTER mode that needs baud clock.
- */
+ /* Do not error out for slave cases that live without a baud clock */
ssi->baudclk = devm_clk_get(dev, "baud");
if (IS_ERR(ssi->baudclk))
dev_dbg(dev, "could not get baud clock: %ld\n",
@@ -1414,25 +1318,20 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
ssi->dma_params_tx.addr = ssi->ssi_phys + CCSR_SSI_STX0;
ssi->dma_params_rx.addr = ssi->ssi_phys + CCSR_SSI_SRX0;
+ /* Set to dual FIFO mode according to the SDMA sciprt */
ret = of_property_read_u32_array(np, "dmas", dmas, 4);
if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
ssi->use_dual_fifo = true;
- /* When using dual fifo mode, we need to keep watermark
- * as even numbers due to dma script limitation.
+ /*
+ * Use even numbers to avoid channel swap due to SDMA
+ * script design
*/
ssi->dma_params_tx.maxburst &= ~0x1;
ssi->dma_params_rx.maxburst &= ~0x1;
}
if (!ssi->use_dma) {
-
- /*
- * Some boards use an incompatible codec. To get it
- * working, we are using imx-fiq-pcm-audio, that
- * can handle those codecs. DMA is not possible in this
- * situation.
- */
-
+ /* Use imx-fiq-pcm-audio for codec incompatible with DMA */
ssi->fiq_params.irq = ssi->irq;
ssi->fiq_params.base = iomem;
ssi->fiq_params.dma_params_rx = &ssi->dma_params_rx;
@@ -1490,12 +1389,14 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi->soc = of_id->data;
ssi->dev = dev;
+ /* Check if being used in AC97 mode */
sprop = of_get_property(np, "fsl,mode", NULL);
if (sprop) {
if (!strcmp(sprop, "ac97-slave"))
ssi->dai_fmt = SND_SOC_DAIFMT_AC97;
}
+ /* Select DMA or FIQ */
ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter");
if (fsl_ssi_is_ac97(ssi)) {
@@ -1504,7 +1405,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
fsl_ac97_data = ssi;
} else {
- /* Initialize this copy of the CPU DAI driver structure */
memcpy(&ssi->cpu_dai_drv, &fsl_ssi_dai_template,
sizeof(fsl_ssi_dai_template));
}
@@ -1517,10 +1417,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi->ssi_phys = res->start;
if (ssi->soc->imx21regs) {
- /*
- * According to datasheet imx21-class SSI
- * don't have SACC{ST,EN,DIS} regs.
- */
+ /* No SACC{ST,EN,DIS} regs in imx21-class SSI */
regconfig.max_register = CCSR_SSI_SRMSK;
regconfig.num_reg_defaults_raw =
CCSR_SSI_SRMSK / sizeof(uint32_t) + 1;
@@ -1546,7 +1443,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
return ssi->irq;
}
- /* Are the RX and the TX clocks locked? */
+ /* Set software limitations for synchronous mode */
if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
if (!fsl_ssi_is_ac97(ssi)) {
ssi->cpu_dai_drv.symmetric_rates = 1;
@@ -1556,50 +1453,28 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi->cpu_dai_drv.symmetric_channels = 1;
}
- /* Determine the FIFO depth. */
+ /* Fetch FIFO depth; Set to 8 for older DT without this property */
iprop = of_get_property(np, "fsl,fifo-depth", NULL);
if (iprop)
ssi->fifo_depth = be32_to_cpup(iprop);
else
- /* Older 8610 DTs didn't have the fifo-depth property */
ssi->fifo_depth = 8;
/*
- * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't
- * use FIFO 1 but set the watermark appropriately nontheless.
- * We program the transmit water to signal a DMA transfer
- * if there are N elements left in the FIFO. For chips with 15-deep
- * FIFOs, set watermark to 8. This allows the SSI to operate at a
- * high data rate without channel slipping. Behavior is unchanged
- * for the older chips with a fifo depth of only 8. A value of 4
- * might be appropriate for the older chips, but is left at
- * fifo_depth-2 until sombody has a chance to test.
+ * Configure TX and RX DMA watermarks.
*
- * We set the watermark on the same level as the DMA burstsize. For
- * fiq it is probably better to use the biggest possible watermark
- * size.
+ * Values should be tested to avoid FIFO under/over run. Set maxburst
+ * to fifo_watermark to maxiumize DMA transaction to reduce overhead.
*/
switch (ssi->fifo_depth) {
case 15:
- /*
- * 2 samples is not enough when running at high data
- * rates (like 48kHz @ 16 bits/channel, 16 channels)
- * 8 seems to split things evenly and leave enough time
- * for the DMA to fill the FIFO before it's over/under
- * run.
- */
+ /* Tested with cases running at 48kHz @ 16 bits x 16 channels */
ssi->fifo_watermark = 8;
ssi->dma_maxburst = 8;
break;
case 8:
default:
- /*
- * maintain old behavior for older chips.
- * Keeping it the same because I don't have an older
- * board to test with.
- * I suspect this could be changed to be something to
- * leave some more space in the fifo.
- */
+ /* Use old watermark configurations for older chips */
ssi->fifo_watermark = ssi->fifo_depth - 2;
ssi->dma_maxburst = ssi->fifo_depth - 2;
break;
@@ -1642,18 +1517,14 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (ret)
goto error_asoc_register;
- /*
- * If codec-handle property is missing from SSI node, we assume
- * that the machine driver uses new binding which does not require
- * SSI driver to trigger machine driver's probe.
- */
+ /* Bypass it if using newer DT bindings of ASoC machine drivers */
if (!of_get_property(np, "codec-handle", NULL))
goto done;
- /* Trigger the machine driver's probe function. The platform driver
- * name of the machine driver is taken from /compatible property of the
- * device tree. We also pass the address of the CPU DAI driver
- * structure.
+ /*
+ * Backward compatible for older bindings by manually triggering the
+ * machine driver's probe(). Use /compatible property, including the
+ * address of CPU DAI driver structure, as the name of machine driver.
*/
sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
/* Sometimes the compatible name has a "fsl," prefix, so we strip it. */
diff --git a/sound/soc/fsl/fsl_ssi.h b/sound/soc/fsl/fsl_ssi.h
index 5065105..1ad3bde 100644
--- a/sound/soc/fsl/fsl_ssi.h
+++ b/sound/soc/fsl/fsl_ssi.h
@@ -1,5 +1,5 @@
/*
- * fsl_ssi.h - ALSA SSI interface for the Freescale MPC8610 SoC
+ * fsl_ssi.h - ALSA SSI interface for the Freescale MPC8610 and i.MX SoC
*
* Author: Timur Tabi <timur@...escale.com>
*
@@ -12,31 +12,75 @@
#ifndef _MPC8610_I2S_H
#define _MPC8610_I2S_H
-/* SSI registers */
+/* -- SSI Register Map -- */
+
+/* SSI Transmit Data Register 0 */
#define CCSR_SSI_STX0 0x00
+/* SSI Transmit Data Register 1 */
#define CCSR_SSI_STX1 0x04
+/* SSI Receive Data Register 0 */
#define CCSR_SSI_SRX0 0x08
+/* SSI Receive Data Register 1 */
#define CCSR_SSI_SRX1 0x0c
+/* SSI Control Register */
#define CCSR_SSI_SCR 0x10
+/* SSI Interrupt Status Register */
#define CCSR_SSI_SISR 0x14
+/* SSI Interrupt Enable Register */
#define CCSR_SSI_SIER 0x18
+/* SSI Transmit Configuration Register */
#define CCSR_SSI_STCR 0x1c
+/* SSI Receive Configuration Register */
#define CCSR_SSI_SRCR 0x20
+/* SSI Transmit Clock Control Register */
#define CCSR_SSI_STCCR 0x24
+/* SSI Receive Clock Control Register */
#define CCSR_SSI_SRCCR 0x28
+/* SSI FIFO Control/Status Register */
#define CCSR_SSI_SFCSR 0x2c
+/*
+ * SSI Test Register (Intended for debugging purposes only)
+ *
+ * Note: STR is not documented in recent IMX datasheet, but
+ * is described in IMX51 reference manual at section 56.3.3.14
+ */
#define CCSR_SSI_STR 0x30
+/*
+ * SSI Option Register (Intended for internal use only)
+ *
+ * Note: SOR is not documented in recent IMX datasheet, but
+ * is described in IMX51 reference manual at section 56.3.3.15
+ */
#define CCSR_SSI_SOR 0x34
+/* SSI AC97 Control Register */
#define CCSR_SSI_SACNT 0x38
+/* SSI AC97 Command Address Register */
#define CCSR_SSI_SACADD 0x3c
+/* SSI AC97 Command Data Register */
#define CCSR_SSI_SACDAT 0x40
+/* SSI AC97 Tag Register */
#define CCSR_SSI_SATAG 0x44
+/* SSI Transmit Time Slot Mask Register */
#define CCSR_SSI_STMSK 0x48
+/* SSI Receive Time Slot Mask Register */
#define CCSR_SSI_SRMSK 0x4c
+/*
+ * SSI AC97 Channel Status Register
+ *
+ * The status could be changed by:
+ * 1) Writing a '1' bit at some position in SACCEN sets relevant bit in SACCST
+ * 2) Writing a '1' bit at some position in SACCDIS unsets the relevant bit
+ * 3) Receivng a '1' in SLOTREQ bit from external CODEC via AC Link
+ */
#define CCSR_SSI_SACCST 0x50
+/* SSI AC97 Channel Enable Register -- Set bits in SACCST */
#define CCSR_SSI_SACCEN 0x54
+/* SSI AC97 Channel Disable Register -- Clear bits in SACCST */
#define CCSR_SSI_SACCDIS 0x58
+/* -- SSI Register Field Maps -- */
+
+/* SSI Control Register -- CCSR_SSI_SCR 0x10 */
#define CCSR_SSI_SCR_SYNC_TX_FS 0x00001000
#define CCSR_SSI_SCR_RFR_CLK_DIS 0x00000800
#define CCSR_SSI_SCR_TFR_CLK_DIS 0x00000400
@@ -52,6 +96,7 @@
#define CCSR_SSI_SCR_TE 0x00000002
#define CCSR_SSI_SCR_SSIEN 0x00000001
+/* SSI Interrupt Status Register -- CCSR_SSI_SISR 0x14 */
#define CCSR_SSI_SISR_RFRC 0x01000000
#define CCSR_SSI_SISR_TFRC 0x00800000
#define CCSR_SSI_SISR_CMDAU 0x00040000
@@ -74,6 +119,7 @@
#define CCSR_SSI_SISR_TFE1 0x00000002
#define CCSR_SSI_SISR_TFE0 0x00000001
+/* SSI Interrupt Enable Register -- CCSR_SSI_SIER 0x18 */
#define CCSR_SSI_SIER_RFRC_EN 0x01000000
#define CCSR_SSI_SIER_TFRC_EN 0x00800000
#define CCSR_SSI_SIER_RDMAE 0x00400000
@@ -100,6 +146,7 @@
#define CCSR_SSI_SIER_TFE1_EN 0x00000002
#define CCSR_SSI_SIER_TFE0_EN 0x00000001
+/* SSI Transmit Configuration Register -- CCSR_SSI_STCR 0x1C */
#define CCSR_SSI_STCR_TXBIT0 0x00000200
#define CCSR_SSI_STCR_TFEN1 0x00000100
#define CCSR_SSI_STCR_TFEN0 0x00000080
@@ -111,6 +158,7 @@
#define CCSR_SSI_STCR_TFSL 0x00000002
#define CCSR_SSI_STCR_TEFS 0x00000001
+/* SSI Receive Configuration Register -- CCSR_SSI_SRCR 0x20 */
#define CCSR_SSI_SRCR_RXEXT 0x00000400
#define CCSR_SSI_SRCR_RXBIT0 0x00000200
#define CCSR_SSI_SRCR_RFEN1 0x00000100
@@ -123,7 +171,10 @@
#define CCSR_SSI_SRCR_RFSL 0x00000002
#define CCSR_SSI_SRCR_REFS 0x00000001
-/* STCCR and SRCCR */
+/*
+ * SSI Transmit Clock Control Register -- CCSR_SSI_STCCR 0x24
+ * SSI Receive Clock Control Register -- CCSR_SSI_SRCCR 0x28
+ */
#define CCSR_SSI_SxCCR_DIV2_SHIFT 18
#define CCSR_SSI_SxCCR_DIV2 0x00040000
#define CCSR_SSI_SxCCR_PSR_SHIFT 17
@@ -142,9 +193,10 @@
((((x) - 1) << CCSR_SSI_SxCCR_PM_SHIFT) & CCSR_SSI_SxCCR_PM_MASK)
/*
- * The xFCNT bits are read-only, and the xFWM bits are read/write. Use the
- * CCSR_SSI_SFCSR_xFCNTy() macros to read the FIFO counters, and use the
- * CCSR_SSI_SFCSR_xFWMy() macros to set the watermarks.
+ * SSI FIFO Control/Status Register -- CCSR_SSI_SFCSR 0x2c
+ *
+ * Tx or Rx FIFO Counter -- CCSR_SSI_SFCSR_xFCNTy Read-Only
+ * Tx or Rx FIFO Watermarks -- CCSR_SSI_SFCSR_xFWMy Read/Write
*/
#define CCSR_SSI_SFCSR_RFCNT1_SHIFT 28
#define CCSR_SSI_SFCSR_RFCNT1_MASK 0xF0000000
@@ -179,6 +231,7 @@
#define CCSR_SSI_SFCSR_TFWM0(x) \
(((x) << CCSR_SSI_SFCSR_TFWM0_SHIFT) & CCSR_SSI_SFCSR_TFWM0_MASK)
+/* SSI Test Register -- CCSR_SSI_STR 0x30 */
#define CCSR_SSI_STR_TEST 0x00008000
#define CCSR_SSI_STR_RCK2TCK 0x00004000
#define CCSR_SSI_STR_RFS2TFS 0x00002000
@@ -188,6 +241,7 @@
#define CCSR_SSI_STR_TFS2RFS 0x00000020
#define CCSR_SSI_STR_TXSTATE(x) ((x) & 0x1F)
+/* SSI Option Register -- CCSR_SSI_SOR 0x34 */
#define CCSR_SSI_SOR_CLKOFF 0x00000040
#define CCSR_SSI_SOR_RX_CLR 0x00000020
#define CCSR_SSI_SOR_TX_CLR 0x00000010
@@ -197,6 +251,7 @@
#define CCSR_SSI_SOR_WAIT(x) (((x) & 3) << CCSR_SSI_SOR_WAIT_SHIFT)
#define CCSR_SSI_SOR_SYNRST 0x00000001
+/* SSI AC97 Control Register -- CCSR_SSI_SACNT 0x38 */
#define CCSR_SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
#define CCSR_SSI_SACNT_WR 0x00000010
#define CCSR_SSI_SACNT_RD 0x00000008
diff --git a/sound/soc/fsl/fsl_ssi_dbg.c b/sound/soc/fsl/fsl_ssi_dbg.c
index 5469ffb..9c7fa6c 100644
--- a/sound/soc/fsl/fsl_ssi_dbg.c
+++ b/sound/soc/fsl/fsl_ssi_dbg.c
@@ -82,9 +82,10 @@ void fsl_ssi_dbg_isr(struct fsl_ssi_dbg *dbg, u32 sisr)
dbg->stats.tfe0++;
}
-/* Show the statistics of a flag only if its interrupt is enabled. The
- * compiler will optimze this code to a no-op if the interrupt is not
- * enabled.
+/**
+ * Show the statistics of a flag only if its interrupt is enabled
+ *
+ * Compilers will optimze it to a no-op if the interrupt is disabled
*/
#define SIER_SHOW(flag, name) \
do { \
@@ -94,10 +95,9 @@ void fsl_ssi_dbg_isr(struct fsl_ssi_dbg *dbg, u32 sisr)
/**
- * fsl_sysfs_ssi_show: display SSI statistics
+ * Display the statistics for the current SSI device
*
- * Display the statistics for the current SSI device. To avoid confusion,
- * we only show those counts that are enabled.
+ * To avoid confusion, only show those counts that are enabled
*/
static int fsl_ssi_stats_show(struct seq_file *s, void *unused)
{
--
2.1.4
Powered by blists - more mailing lists