| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171213094718.GE13194@kroah.com>
Date: Wed, 13 Dec 2017 10:47:18 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Viresh Kumar <viresh.kumar@...aro.org>
Cc: Vincent Guittot <vincent.guittot@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
robdclark@...il.com, s.hauer@...gutronix.de,
l.stach@...gutronix.de, shawnguo@...nel.org, fabio.estevam@....com,
nm@...com, xuwei5@...ilicon.com, robh+dt@...nel.org
Subject: Re: [PATCH V4 10/12] boot_constraint: Add support for Hisilicon
platforms
On Sun, Oct 29, 2017 at 07:18:58PM +0530, Viresh Kumar wrote:
> This adds boot constraint support for Hisilicon platforms. Currently
> only one use case is supported: earlycon. One of the UART is enabled by
> the bootloader and is used for early console in the kernel. The boot
> constraint core handles it properly and removes constraints once the
> serial device is probed by its driver.
>
> This is tested on hi6220-hikey 96board.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
> ---
> arch/arm64/Kconfig.platforms | 1 +
> drivers/boot_constraints/Makefile | 2 +
> drivers/boot_constraints/hikey.c | 145 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 148 insertions(+)
> create mode 100644 drivers/boot_constraints/hikey.c
>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 6b54ee8c1262..265df4a088ab 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -87,6 +87,7 @@ config ARCH_HISI
> select ARM_TIMER_SP804
> select HISILICON_IRQ_MBIGEN if PCI
> select PINCTRL
> + select DEV_BOOT_CONSTRAINTS
> help
> This enables support for Hisilicon ARMv8 SoC family
>
> diff --git a/drivers/boot_constraints/Makefile b/drivers/boot_constraints/Makefile
> index 0d4f88bb767c..43c89d2458e9 100644
> --- a/drivers/boot_constraints/Makefile
> +++ b/drivers/boot_constraints/Makefile
> @@ -1,3 +1,5 @@
> # Makefile for device boot constraints
>
> obj-y := clk.o deferrable_dev.o core.o pm.o serial.o supply.o
> +
> +obj-$(CONFIG_ARCH_HISI) += hikey.o
> diff --git a/drivers/boot_constraints/hikey.c b/drivers/boot_constraints/hikey.c
> new file mode 100644
> index 000000000000..5f69f9451d93
> --- /dev/null
> +++ b/drivers/boot_constraints/hikey.c
> @@ -0,0 +1,145 @@
> +/*
> + * This takes care of Hisilicon boot time device constraints, normally set by
> + * the Bootloader.
> + *
> + * Copyright (C) 2017 Linaro.
> + * Viresh Kumar <viresh.kumar@...aro.org>
> + *
> + * This file is released under the GPLv2.
> + */
> +
> +#include <linux/boot_constraint.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +
> +struct hikey_machine_constraints {
> + struct dev_boot_constraint_of *dev_constraints;
> + unsigned int count;
> +};
> +
> +static struct dev_boot_constraint_clk_info uart_iclk_info = {
> + .name = "uartclk",
> +};
> +
> +static struct dev_boot_constraint_clk_info uart_pclk_info = {
> + .name = "apb_pclk",
> +};
> +
> +static struct dev_boot_constraint hikey3660_uart_constraints[] = {
> + {
> + .type = DEV_BOOT_CONSTRAINT_CLK,
> + .data = &uart_iclk_info,
> + }, {
> + .type = DEV_BOOT_CONSTRAINT_CLK,
> + .data = &uart_pclk_info,
> + },
> +};
> +
> +static const char * const uarts_hikey3660[] = {
> + "serial@...32000", /* UART 6 */
> +};
> +
> +static struct dev_boot_constraint_of hikey3660_dev_constraints[] = {
> + {
> + .compat = "arm,pl011",
> + .constraints = hikey3660_uart_constraints,
> + .count = ARRAY_SIZE(hikey3660_uart_constraints),
> +
> + .dev_names = uarts_hikey3660,
> + .dev_names_count = ARRAY_SIZE(uarts_hikey3660),
> + },
> +};
> +
> +static struct hikey_machine_constraints hikey3660_constraints = {
> + .dev_constraints = hikey3660_dev_constraints,
> + .count = ARRAY_SIZE(hikey3660_dev_constraints),
> +};
> +
> +static const char * const uarts_hikey6220[] = {
> + "uart@...13000", /* UART 3 */
> +};
> +
> +static struct dev_boot_constraint_of hikey6220_dev_constraints[] = {
> + {
> + .compat = "arm,pl011",
> + .constraints = hikey3660_uart_constraints,
> + .count = ARRAY_SIZE(hikey3660_uart_constraints),
> +
> + .dev_names = uarts_hikey6220,
> + .dev_names_count = ARRAY_SIZE(uarts_hikey6220),
> + },
> +};
> +
> +static struct hikey_machine_constraints hikey6220_constraints = {
> + .dev_constraints = hikey6220_dev_constraints,
> + .count = ARRAY_SIZE(hikey6220_dev_constraints),
> +};
> +
> +static struct dev_boot_constraint hikey3798cv200_uart_constraints[] = {
> + {
> + .type = DEV_BOOT_CONSTRAINT_CLK,
> + .data = &uart_pclk_info,
> + },
> +};
> +
> +static const char * const uarts_hikey3798cv200[] = {
> + "serial@...0000", /* UART 0 */
> +};
> +
> +static struct dev_boot_constraint_of hikey3798cv200_dev_constraints[] = {
> + {
> + .compat = "arm,pl011",
> + .constraints = hikey3798cv200_uart_constraints,
> + .count = ARRAY_SIZE(hikey3798cv200_uart_constraints),
> +
> + .dev_names = uarts_hikey3798cv200,
> + .dev_names_count = ARRAY_SIZE(uarts_hikey3798cv200),
> + },
> +};
> +
> +static struct hikey_machine_constraints hikey3798cv200_constraints = {
> + .dev_constraints = hikey3798cv200_dev_constraints,
> + .count = ARRAY_SIZE(hikey3798cv200_dev_constraints),
> +};
> +
> +static const struct of_device_id machines[] __initconst = {
> + { .compatible = "hisilicon,hi3660", .data = &hikey3660_constraints },
> + { .compatible = "hisilicon,hi3798cv200", .data = &hikey3798cv200_constraints },
> + { .compatible = "hisilicon,hi6220", .data = &hikey6220_constraints },
> + { }
> +};
> +
> +static int __init hikey_constraints_init(void)
> +{
> + const struct hikey_machine_constraints *constraints;
> + const struct of_device_id *match;
> + struct device_node *np;
> +
> + if (!boot_constraint_earlycon_enabled())
> + return 0;
> +
> + np = of_find_node_by_path("/");
What is this for?
> + if (!np)
> + return -ENODEV;
> +
> + match = of_match_node(machines, np);
> + of_node_put(np);
> +
> + if (!match)
> + return 0;
> +
> + constraints = match->data;
> + BUG_ON(!constraints);
Never crash the device for a driver configuration issue. That's going
to be bad.
> + dev_boot_constraint_add_deferrable_of(constraints->dev_constraints,
> + constraints->count);
> +
> + return 0;
> +}
> +
> +/*
> + * The amba-pl011 driver registers itself from arch_initcall level. Setup the
> + * serial boot constraints before that in order not to miss any boot messages.
> + */
> +postcore_initcall_sync(hikey_constraints_init);
Now you have to worry about the bootconstraints earlycon being called
before/after your code. That's another linking order dependancy you
just created. It feels more complex for something so "simple" as
looking for the earlycon flag...
thanks,
greg k-h
Powered by blists - more mailing lists