linux-kernel - RE: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <TY1PR06MB099286FD9833ED7F7F259B5BD80A0@TY1PR06MB0992.apcprd06.prod.outlook.com>
Date:   Thu, 14 Dec 2017 09:44:57 +0000
From:   Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To:     Geert Uytterhoeven <geert@...ux-m68k.org>
CC:     Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: RE: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling

Hi Geert-san,

> From: Geert Uytterhoeven, Sent: Wednesday, December 13, 2017 5:55 PM
> 
> Hi Shimoda-san,
> 
> On Wed, Dec 13, 2017 at 7:27 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@...esas.com> wrote:
> > Some R-Car SoCs (e.g. R-Car D3) doesn't have dedicated pins of VBUS
> > and ID. So, they may be connected to gpio pins. To handle the gpio
> > pins, this patch adds the handling of VBUS and ID pins instead of
> > dedicated pins.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> > ---
> >  .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  2 +
> >  drivers/phy/renesas/phy-rcar-gen3-usb2.c           | 77 ++++++++++++++++++++--
> >  2 files changed, 72 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > index 99b651b..851582f 100644
> > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > @@ -27,6 +27,8 @@ channel as USB OTG:
> >  - interrupts: interrupt specifier for the PHY.
> >  - vbus-supply: Phandle to a regulator that provides power to the VBUS. This
> >                regulator will be managed during the PHY power on/off sequence.
> > +- renesas,vbus-gpios: use gpio to control vbus instead of dedicated pin.
> > +- renesas,id-gpios: use gpio to detect id instead of dedicated pin.
> 
> Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt already uses
> "vbus-gpios" and "id-gpios" without vendor-specific prefixes, so perhaps
> the "renesas," can be dropped?

Thank you for the comments. I agree with you. So, I'll drop "renesas," in v2.

Best regards,
Yoshihiro Shimoda

> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds