linux-kernel - Re: [PATCH v2 3/3] arm: dts: mt7623: fix card detection issue on bananapi-r2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <14ba6eb7-c9a3-f78b-e0e2-c44846aa1f76@gmail.com>
Date:   Thu, 14 Dec 2017 12:17:46 +0100
From:   Matthias Brugger <matthias.bgg@...il.com>
To:     sean.wang@...iatek.com, robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-mediatek@...ts.infradead.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        stable@...r.kernel.org
Subject: Re: [PATCH v2 3/3] arm: dts: mt7623: fix card detection issue on
 bananapi-r2



On 12/07/2017 07:43 AM, sean.wang@...iatek.com wrote:
> From: Sean Wang <sean.wang@...iatek.com>
> 
> Fix that bananapi-r2 booting from SD-card would fail since incorrect
> polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.
> 
> Cc: stable@...r.kernel.org
> Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
> Signed-off-by: Sean Wang <sean.wang@...iatek.com>
> Tested-by: Matthias Brugger <matthias.bgg@...il.com>
> ---
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 688a863..7bf5aa2 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -204,7 +204,7 @@
>  	bus-width = <4>;
>  	max-frequency = <50000000>;
>  	cap-sd-highspeed;
> -	cd-gpios = <&pio 261 0>;
> +	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
>  	vmmc-supply = <&mt6323_vmch_reg>;
>  	vqmmc-supply = <&mt6323_vio18_reg>;
>  };
> 

2 and 3 pushed to v4.15-next/dts32

Thanks!