linux-kernel - [PATCH 16/25] arm: zx: dts: Remove leading 0x and 0s from bindings notation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171215124649.30692-1-malat@debian.org>
Date:   Fri, 15 Dec 2017 13:46:48 +0100
From:   Mathieu Malaterre <malat@...ian.org>
To:     Rob Herring <robh+dt@...nel.org>
Cc:     Mathieu Malaterre <malat@...ian.org>, Jun Nie <jun.nie@...aro.org>,
        Baoyou Xie <baoyou.xie@...aro.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 16/25] arm: zx: dts: Remove leading 0x and 0s from bindings notation

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@...iumnetworks.com>
Suggested-by: Rob Herring <robh@...nel.org>
Signed-off-by: Mathieu Malaterre <malat@...ian.org>
---
 arch/arm/boot/dts/zx296702.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index 8a74efdb6360..240e7a23d81f 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -56,7 +56,7 @@
 			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
 		};
 
-		l2cc: l2-cache-controller@...0c00000 {
+		l2cc: l2-cache-controller@...000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00c00000 0x1000>;
 			cache-unified;
@@ -67,30 +67,30 @@
 			arm,double-linefill-incr = <0>;
 		};
 
-		pcu: pcu@...0008000 {
+		pcu: pcu@...08000 {
 			compatible = "zte,zx296702-pcu";
 			reg = <0xa0008000 0x1000>;
 		};
 
-		topclk: topclk@...9800000 {
+		topclk: topclk@...0000 {
 			compatible = "zte,zx296702-topcrm-clk";
 			reg = <0x09800000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp1clk: lsp1clk@...9400000 {
+		lsp1clk: lsp1clk@...0000 {
 			compatible = "zte,zx296702-lsp1crpm-clk";
 			reg = <0x09400000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp0clk: lsp0clk@...b000000 {
+		lsp0clk: lsp0clk@...0000 {
 			compatible = "zte,zx296702-lsp0crpm-clk";
 			reg = <0x0b000000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		uart0: serial@...9405000 {
+		uart0: serial@...5000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09405000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@...9406000 {
+		uart1: serial@...6000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09406000 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
 			status = "disabled";
 		};
 
-		mmc0: mmc@...9408000 {
+		mmc0: mmc@...8000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,7 +119,7 @@
 			status = "disabled";
 		};
 
-		mmc1: mmc@...b003000 {
+		mmc1: mmc@...3000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -132,7 +132,7 @@
 			status = "disabled";
 		};
 
-		sysctrl: sysctrl@...0007000 {
+		sysctrl: sysctrl@...07000 {
 			compatible = "zte,sysctrl", "syscon";
 			reg = <0xa0007000 0x1000>;
 		};
-- 
2.11.0