| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Dec 2017 13:46:45 +0100
From: Mathieu Malaterre <malat@...ian.org>
To: Rob Herring <robh+dt@...nel.org>
Cc: Mathieu Malaterre <malat@...ian.org>,
Viresh Kumar <vireshk@...nel.org>,
Shiraz Hashim <shiraz.linux.kernel@...il.com>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 13/25] arm: spear: dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@...iumnetworks.com>
Suggested-by: Rob Herring <robh@...nel.org>
Signed-off-by: Mathieu Malaterre <malat@...ian.org>
---
arch/arm/boot/dts/spear1310-evb.dts | 4 ++--
arch/arm/boot/dts/spear300.dtsi | 2 +-
arch/arm/boot/dts/spear310.dtsi | 2 +-
arch/arm/boot/dts/spear320-hmi.dts | 4 ++--
arch/arm/boot/dts/spear320.dtsi | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 84101e4eebbf..438e3e16aeda 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -133,7 +133,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@...000 {
+ partition@...000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -145,7 +145,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@...000 {
+ partition@...000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f4e92e599729..266fefa67223 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -52,7 +52,7 @@
status = "disabled";
};
- shirq: interrupt-controller@...0000000 {
+ shirq: interrupt-controller@...00000 {
compatible = "st,spear300-shirq";
reg = <0x50000000 0x1000>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index da210b454753..f995ecf09acf 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -40,7 +40,7 @@
status = "disabled";
};
- shirq: interrupt-controller@...4000000 {
+ shirq: interrupt-controller@...00000 {
compatible = "st,spear310-shirq";
reg = <0xb4000000 0x1000>;
interrupts = <28 29 30 1>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0d0da1f65f0e..6591cd616d0e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -113,7 +113,7 @@
label = "u-boot";
reg = <0x80000 0x140000>;
};
- partition@...000 {
+ partition@...000 {
label = "environment";
reg = <0x1C0000 0x40000>;
};
@@ -125,7 +125,7 @@
label = "linux";
reg = <0x240000 0xC00000>;
};
- partition@...000 {
+ partition@...000 {
label = "rootfs";
reg = <0xE40000 0x0>;
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 22be6e5edaac..2a062a3ee139 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -55,7 +55,7 @@
status = "disabled";
};
- shirq: interrupt-controller@...3000000 {
+ shirq: interrupt-controller@...00000 {
compatible = "st,spear320-shirq";
reg = <0xb3000000 0x1000>;
interrupts = <30 28 29 1>;
--
2.11.0
Powered by blists - more mailing lists