| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <201712152241.VthjiasJ%fengguang.wu@intel.com>
Date: Fri, 15 Dec 2017 22:13:15 +0800
From: kbuild test robot <lkp@...el.com>
To: sean.wang@...iatek.com
Cc: kbuild-all@...org, davem@...emloft.net, andrew@...n.ch,
f.fainelli@...il.com, vivien.didelot@...oirfairelinux.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
Sean Wang <sean.wang@...iatek.com>
Subject: Re: [PATCH v2 net-next 1/3] net: dsa: mediatek: add VLAN support for
MT7530
Hi Sean,
I love your patch! Yet something to improve:
[auto build test ERROR on net-next/master]
url: https://github.com/0day-ci/linux/commits/sean-wang-mediatek-com/add-VLAN-support-to-DSA-MT7530/20171215-214450
config: i386-randconfig-x019-201750 (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
drivers/net/dsa/mt7530.c: In function 'mt7530_port_vlan_add':
drivers/net/dsa/mt7530.c:1131:6: warning: unused variable 'ret' [-Wunused-variable]
int ret;
^~~
drivers/net/dsa/mt7530.c: At top level:
>> drivers/net/dsa/mt7530.c:1324:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
.port_vlan_prepare = mt7530_port_vlan_prepare,
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mt7530.c:1324:23: note: (near initialization for 'mt7530_switch_ops.port_vlan_prepare')
drivers/net/dsa/mt7530.c:1325:20: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
.port_vlan_add = mt7530_port_vlan_add,
^~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mt7530.c:1325:20: note: (near initialization for 'mt7530_switch_ops.port_vlan_add')
cc1: some warnings being treated as errors
vim +1324 drivers/net/dsa/mt7530.c
1121
1122 static void
1123 mt7530_port_vlan_add(struct dsa_switch *ds, int port,
1124 const struct switchdev_obj_port_vlan *vlan,
1125 struct switchdev_trans *trans)
1126 {
1127 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1128 bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1129 struct mt7530_hw_vlan_entry new_entry;
1130 struct mt7530_priv *priv = ds->priv;
> 1131 int ret;
1132 u16 vid;
1133
1134 /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
1135 * being set.
1136 */
1137 if (!priv->ports[port].vlan_filtering)
1138 return;
1139
1140 mutex_lock(&priv->reg_mutex);
1141
1142 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1143 mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
1144 mt7530_hw_vlan_update(priv, vid, &new_entry,
1145 mt7530_hw_vlan_add);
1146 }
1147
1148 if (pvid) {
1149 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
1150 G0_PORT_VID(vlan->vid_end));
1151 priv->ports[port].pvid = vlan->vid_end;
1152 }
1153
1154 mutex_unlock(&priv->reg_mutex);
1155 }
1156
1157 static int
1158 mt7530_port_vlan_del(struct dsa_switch *ds, int port,
1159 const struct switchdev_obj_port_vlan *vlan)
1160 {
1161 struct mt7530_hw_vlan_entry target_entry;
1162 struct mt7530_priv *priv = ds->priv;
1163 u16 vid, pvid;
1164
1165 /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
1166 * being set.
1167 */
1168 if (!priv->ports[port].vlan_filtering)
1169 return 0;
1170
1171 mutex_lock(&priv->reg_mutex);
1172
1173 pvid = priv->ports[port].pvid;
1174 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
1175 mt7530_hw_vlan_entry_init(&target_entry, port, 0);
1176 mt7530_hw_vlan_update(priv, vid, &target_entry,
1177 mt7530_hw_vlan_del);
1178
1179 /* PVID is being restored to the default whenever the PVID port
1180 * is being removed from the VLAN.
1181 */
1182 if (pvid == vid)
1183 pvid = G0_PORT_VID_DEF;
1184 }
1185
1186 mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid);
1187 priv->ports[port].pvid = pvid;
1188
1189 mutex_unlock(&priv->reg_mutex);
1190
1191 return 0;
1192 }
1193
1194 static enum dsa_tag_protocol
1195 mtk_get_tag_protocol(struct dsa_switch *ds, int port)
1196 {
1197 struct mt7530_priv *priv = ds->priv;
1198
1199 if (port != MT7530_CPU_PORT) {
1200 dev_warn(priv->dev,
1201 "port not matched with tagging CPU port\n");
1202 return DSA_TAG_PROTO_NONE;
1203 } else {
1204 return DSA_TAG_PROTO_MTK;
1205 }
1206 }
1207
1208 static int
1209 mt7530_setup(struct dsa_switch *ds)
1210 {
1211 struct mt7530_priv *priv = ds->priv;
1212 int ret, i;
1213 u32 id, val;
1214 struct device_node *dn;
1215 struct mt7530_dummy_poll p;
1216
1217 /* The parent node of master netdev which holds the common system
1218 * controller also is the container for two GMACs nodes representing
1219 * as two netdev instances.
1220 */
1221 dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
1222 priv->ethernet = syscon_node_to_regmap(dn);
1223 if (IS_ERR(priv->ethernet))
1224 return PTR_ERR(priv->ethernet);
1225
1226 regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
1227 ret = regulator_enable(priv->core_pwr);
1228 if (ret < 0) {
1229 dev_err(priv->dev,
1230 "Failed to enable core power: %d\n", ret);
1231 return ret;
1232 }
1233
1234 regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
1235 ret = regulator_enable(priv->io_pwr);
1236 if (ret < 0) {
1237 dev_err(priv->dev, "Failed to enable io pwr: %d\n",
1238 ret);
1239 return ret;
1240 }
1241
1242 /* Reset whole chip through gpio pin or memory-mapped registers for
1243 * different type of hardware
1244 */
1245 if (priv->mcm) {
1246 reset_control_assert(priv->rstc);
1247 usleep_range(1000, 1100);
1248 reset_control_deassert(priv->rstc);
1249 } else {
1250 gpiod_set_value_cansleep(priv->reset, 0);
1251 usleep_range(1000, 1100);
1252 gpiod_set_value_cansleep(priv->reset, 1);
1253 }
1254
1255 /* Waiting for MT7530 got to stable */
1256 INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
1257 ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
1258 20, 1000000);
1259 if (ret < 0) {
1260 dev_err(priv->dev, "reset timeout\n");
1261 return ret;
1262 }
1263
1264 id = mt7530_read(priv, MT7530_CREV);
1265 id >>= CHIP_NAME_SHIFT;
1266 if (id != MT7530_ID) {
1267 dev_err(priv->dev, "chip %x can't be supported\n", id);
1268 return -ENODEV;
1269 }
1270
1271 /* Reset the switch through internal reset */
1272 mt7530_write(priv, MT7530_SYS_CTRL,
1273 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
1274 SYS_CTRL_REG_RST);
1275
1276 /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
1277 val = mt7530_read(priv, MT7530_MHWTRAP);
1278 val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
1279 val |= MHWTRAP_MANUAL;
1280 mt7530_write(priv, MT7530_MHWTRAP, val);
1281
1282 /* Enable and reset MIB counters */
1283 mt7530_mib_reset(ds);
1284
1285 mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
1286
1287 for (i = 0; i < MT7530_NUM_PORTS; i++) {
1288 /* Disable forwarding by default on all ports */
1289 mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
1290 PCR_MATRIX_CLR);
1291
1292 if (dsa_is_cpu_port(ds, i))
1293 mt7530_cpu_port_enable(priv, i);
1294 else
1295 mt7530_port_disable(ds, i, NULL);
1296 }
1297
1298 /* Flush the FDB table */
1299 ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, 0);
1300 if (ret < 0)
1301 return ret;
1302
1303 return 0;
1304 }
1305
1306 static const struct dsa_switch_ops mt7530_switch_ops = {
1307 .get_tag_protocol = mtk_get_tag_protocol,
1308 .setup = mt7530_setup,
1309 .get_strings = mt7530_get_strings,
1310 .phy_read = mt7530_phy_read,
1311 .phy_write = mt7530_phy_write,
1312 .get_ethtool_stats = mt7530_get_ethtool_stats,
1313 .get_sset_count = mt7530_get_sset_count,
1314 .adjust_link = mt7530_adjust_link,
1315 .port_enable = mt7530_port_enable,
1316 .port_disable = mt7530_port_disable,
1317 .port_stp_state_set = mt7530_stp_state_set,
1318 .port_bridge_join = mt7530_port_bridge_join,
1319 .port_bridge_leave = mt7530_port_bridge_leave,
1320 .port_fdb_add = mt7530_port_fdb_add,
1321 .port_fdb_del = mt7530_port_fdb_del,
1322 .port_fdb_dump = mt7530_port_fdb_dump,
1323 .port_vlan_filtering = mt7530_port_vlan_filtering,
> 1324 .port_vlan_prepare = mt7530_port_vlan_prepare,
1325 .port_vlan_add = mt7530_port_vlan_add,
1326 .port_vlan_del = mt7530_port_vlan_del,
1327 };
1328
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Download attachment ".config.gz" of type "application/gzip" (33639 bytes)
Powered by blists - more mailing lists