[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1513350088.2261.62.camel@baylibre.com>
Date: Fri, 15 Dec 2017 16:01:28 +0100
From: Jerome Brunet <jbrunet@...libre.com>
To: Yixun Lan <yixun.lan@...ogic.com>,
Kevin Hilman <khilman@...libre.com>, devicetree@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Neil Armstrong <narmstrong@...libre.com>,
Mark Rutland <mark.rutland@....com>,
Carlo Caione <carlo@...one.org>,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] ARM64: dts: meson-axg: enable IR controller
On Fri, 2017-12-15 at 22:59 +0800, Yixun Lan wrote:
> Enable IR remote controller which found in Amlogic's Meson-AXG SoCs.
>
> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
>
> ---
>
> Changes since v2 at [2]
> - rebase to Kevin's v4.16/dt64 branch
> - this patch depend on pinctrl DT driver
>
> Changes since v1 at [1]:
> - drop the compatbile 'amlogic,meson-gx-ir'
>
> [2]
> http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005574.html
>
> [1]
> http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005527.html
> ---
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 6 ++++++
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 14 ++++++++++++++
> 2 files changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> index 70eca1f8736a..e85fb665f12e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> @@ -20,3 +20,9 @@
> &uart_AO {
> status = "okay";
> };
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index a0d7b10da512..1cd34141a5c1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -223,6 +223,13 @@
> #gpio-cells = <2>;
> gpio-ranges = <&pinctrl_aobus 0 0 15>;
> };
> +
> + remote_input_ao_pins: remote_input_ao {
> + mux {
> + groups = "remote_input_ao";
> + function = "remote_input_ao";
> + };
> + };
> };
>
> uart_AO: serial@...0 {
> @@ -242,6 +249,13 @@
> clock-names = "xtal", "pclk", "baud";
> status = "disabled";
> };
> +
> + ir: ir@...0 {
> + compatible = "amlogic,meson-gxbb-ir";
compatible = "amlogic,meson-axg-ir", "amlogic,meson-gxbb-ir";
please (and the binding doc patch)
> + reg = <0x0 0x8000 0x0 0x20>;
> + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> };
> };
> };
Powered by blists - more mailing lists