linux-kernel - Re: [PATCH 04/14] ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20171215163207.GB3875@atomide.com>
Date:   Fri, 15 Dec 2017 08:32:07 -0800
From:   Tony Lindgren <tony@...mide.com>
To:     Kishon Vijay Abraham I <kishon@...com>
Cc:     bcousson@...libre.com, Santosh Shilimkar <ssantosh@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, nsekhar@...com
Subject: Re: [PATCH 04/14] ARM: dts: dra76x: Create a common file with MMC/SD
 IOdelay data

* Kishon Vijay Abraham I <kishon@...com> [171215 06:12]:
> Hi Tony,
> 
> On Thursday 14 December 2017 08:45 PM, Tony Lindgren wrote:
> > * Kishon Vijay Abraham I <kishon@...com> [171214 13:44]:
> >> +&dra7_pmx_core {
> >> +	mmc1_pins_default: mmc1_pins_default {
> >> +		pinctrl-single,pins = <
> >> +			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
> >> +			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
> >> +			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
> >> +			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
> >> +			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
> >> +			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
> >> +		>;
> >> +	};
> >> +
> >> +	mmc1_pins_sdr12: mmc1_pins_sdr12 {
> >> +		pinctrl-single,pins = <
> >> +			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
> >> +			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
> >> +			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
> >> +			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
> >> +			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
> >> +			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
> >> +		>;
> >> +	};
> > 
> > Can't you just do:
> > 
> > pinctrl-0 = <&mmc1_pins_default>;
> > pinctrl-1 = <&mmc1_pins_default>;
> > pinctrl-2 = <&mmc1_pins_hs>;
> > pinctrl-names = "default", "sdr12", "sdr25";
> 
> just wanted to make sure every mode has it's own pinctrl group so that it's
> easy to review. Initially we were thinking something like
> mmc1_pins_default_sdr12_sdr25.

OK that naming works fine for me.

> But if you'd prefer we just use mmc1_pins_default for all modes that uses
> default pinmux configuration, I can change it that way too.

No up to you with the naming thanks.

Regards,

Tony