linux-kernel - [RFC 0/5] IR support for A83T

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171216024914.7550-1-embed3d@gmail.com>
Date:   Sat, 16 Dec 2017 03:49:09 +0100
From:   Philipp Rossak <embed3d@...il.com>
To:     mchehab@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        maxime.ripard@...e-electrons.com, wens@...e.org,
        linux@...linux.org.uk, sean@...s.org, p.zabel@...gutronix.de,
        andi.shyti@...sung.com
Cc:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [RFC 0/5] IR support for A83T - sunxi-ir driver update

This patch series adds support for the sunxi A83T ir module and enhances the sunxi-ir driver.
Right now the base clock frequency for the ir driver is a hard coded define and is set to 8 MHz.
This works for the most common ir receivers. On the Sinovoip Bananapi M3 the ir receiver needs,
a 3 MHz base clock frequency to work without problems with this driver (like in the legacy kernel).

To fix this issue I reworked the driver that this value could be set over the devicetree.

About 37 devices would have a devicetree change if this patch series would be applied.
Therfore I would like to ask you to give me some feedback about the patch series, before I finialize it.

Thanks in advance!

Philipp

Philipp Rossak (5):
  [media] rc: update sunxi-ir driver to get base frequency from
    devicetree
  [media] dt: bindings: Update binding documentation for sunxi IR
    controller
  ARM: dts: sun8i: a83t: Add the ir pin for the A83T
  ARM: dts: sun8i: a83t: Add support for the ir interface
  ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller

 Documentation/devicetree/bindings/media/sunxi-ir.txt | 14 ++++++++------
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts         |  7 +++++++
 arch/arm/boot/dts/sun8i-a83t.dtsi                    | 15 +++++++++++++++
 drivers/media/rc/sunxi-cir.c                         | 20 +++++++++++---------
 4 files changed, 41 insertions(+), 15 deletions(-)

-- 
2.11.0