[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171216024914.7550-6-embed3d@gmail.com>
Date: Sat, 16 Dec 2017 03:49:14 +0100
From: Philipp Rossak <embed3d@...il.com>
To: mchehab@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
maxime.ripard@...e-electrons.com, wens@...e.org,
linux@...linux.org.uk, sean@...s.org, p.zabel@...gutronix.de,
andi.shyti@...sung.com
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [RFC 5/5] ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
The Bananapi M3 has an onboard IR receiver.
This enables the onboard IR receiver subnode.
Other than the other IR receivers this one needs a base clock frequency
of 3000000 Hz (3 MHz), to be able to work.
Signed-off-by: Philipp Rossak <embed3d@...il.com>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
arch/arm/boot/dts/sun8i-a83t.dtsi | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index c606af3dbfed..2c92c501cd59 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -88,6 +88,13 @@
/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
};
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ base-clk-frequency = <3000000>;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 5dbf2f0891c1..679ce3a66b4b 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -470,7 +470,7 @@
#reset-cells = <1>;
};
- ir: ir@...02000 {
+ ir: ir@...2000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
--
2.11.0
Powered by blists - more mailing lists