early console in setup code [ 0.000000] Linux version 4.15.0-rc3 (kbuild@lkp-hsx02) (gcc version 6.4.0 20171026 (Debian 6.4.0-9)) #468 PREEMPT Sun Dec 17 02:21:09 CST 2017 [ 0.000000] Command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-12170213/linux-devel:devel-hourly-2017121623:50c4c4e268a2d7a3e58ebb698ac74da0de40ae36/.vmlinuz-50c4c4e268a2d7a3e58ebb698ac74da0de40ae36-20171217022615-1:yocto-ivb41-57 branch=linux-devel/devel-hourly-2017121623 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-12170213/gcc-6/50c4c4e268a2d7a3e58ebb698ac74da0de40ae36/vmlinuz-4.15.0-rc3 drbd.minor_count=8 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd1fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd2000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1ffd2 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f6a60-0x000f6a6f] mapped at [ (ptrval)] [ 0.000000] mpc: f6a70-f6b78 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0x09a24000, 0x09a24fff] PGTABLE [ 0.000000] BRK [0x09a25000, 0x09a25fff] PGTABLE [ 0.000000] BRK [0x09a26000, 0x09a26fff] PGTABLE [ 0.000000] BRK [0x09a27000, 0x09a27fff] PGTABLE [ 0.000000] BRK [0x09a28000, 0x09a28fff] PGTABLE [ 0.000000] BRK [0x09a29000, 0x09a29fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1fbf9000-0x1ffcffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6890 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000001FFE15CE 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000001FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000001FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000001FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000001FFE151E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000001FFE1596 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fd000 ( fee00000) [ 0.000000] kvm-clock: cpu 0, msr 0:1ffd0001, primary cpu clock [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 2378953363 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffd1fff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffd1fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd1fff] [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1984 pages used for memmap [ 0.000000] DMA32 zone: 126930 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] kasan: KernelAddressSanitizer initialized [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000) [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 5133980 [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: fast init done [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128859 [ 0.000000] Kernel command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-12170213/linux-devel:devel-hourly-2017121623:50c4c4e268a2d7a3e58ebb698ac74da0de40ae36/.vmlinuz-50c4c4e268a2d7a3e58ebb698ac74da0de40ae36-20171217022615-1:yocto-ivb41-57 branch=linux-devel/devel-hourly-2017121623 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-12170213/gcc-6/50c4c4e268a2d7a3e58ebb698ac74da0de40ae36/vmlinuz-4.15.0-rc3 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Memory: 284816K/523712K available (44412K kernel code, 33896K rwdata, 20020K rodata, 1828K init, 33964K bss, 238896K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.001000] Running RCU self tests [ 0.001000] Preemptible hierarchical RCU implementation. [ 0.001000] RCU lockdep checking is enabled. [ 0.001000] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 0.001000] Tasks RCU enabled. [ 0.001000] NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16 [ 0.001000] console [ttyS0] enabled [ 0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001000] ... MAX_LOCK_DEPTH: 48 [ 0.001000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001000] ... CLASSHASH_SIZE: 4096 [ 0.001000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001000] ... CHAINHASH_SIZE: 32768 [ 0.001000] memory used by lock dependency info: 7903 kB [ 0.001000] per task-struct memory footprint: 3072 bytes [ 0.001000] ACPI: Core revision 20170831 [ 0.001000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.001000] hpet clockevent registered [ 0.001081] APIC: Switch to symmetric I/O mode setup [ 0.002049] enabled ExtINT on CPU#0 [ 0.003703] ENABLING IO-APIC IRQs [ 0.004137] init IO_APIC IRQs [ 0.004494] apic 0 pin 0 not connected [ 0.005282] IOAPIC[0]: Set routing entry (0-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.006207] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-5 -> 0xef -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-10 -> 0xef -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-11 -> 0xef -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.007000] IOAPIC[0]: Set routing entry (0-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.007000] apic 0 pin 16 not connected [ 0.007000] apic 0 pin 17 not connected [ 0.007000] apic 0 pin 18 not connected [ 0.007000] apic 0 pin 19 not connected [ 0.007000] apic 0 pin 20 not connected [ 0.007000] apic 0 pin 21 not connected [ 0.007000] apic 0 pin 22 not connected [ 0.007000] apic 0 pin 23 not connected [ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.007000] tsc: Detected 2693.508 MHz processor [ 0.007000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508) [ 0.007025] pid_max: default: 4096 minimum: 301 [ 0.009344] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.010040] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.015046] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.015657] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.016018] CPU: GenuineIntel Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x4) [ 0.021628] Performance Events: no PMU driver, software events only. [ 0.023051] Hierarchical SRCU implementation. [ 0.040188] TSC deadline timer enabled [ 0.042944] devtmpfs: initialized [ 0.046764] gcov: version magic: 0x3630342a [ 0.075611] workqueue: round-robin CPU selection forced, expect performance impact [ 0.076631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.077064] futex hash table entries: 16 (order: -2, 1664 bytes) [ 0.079469] xor: automatically using best checksumming function avx [ 0.080030] pinctrl core: initialized pinctrl subsystem [ 0.088866] NET: Registered protocol family 16 [ 0.098959] cpuidle: using governor menu [ 0.102475] ACPI: bus type PCI registered [ 0.103106] PCI: Using configuration type 1 for base access [ 0.368147] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389092] raid6: sse2x1 gen() 1191 MB/s [ 0.406092] raid6: sse2x1 xor() 648 MB/s [ 0.423039] raid6: sse2x2 gen() 929 MB/s [ 0.440036] raid6: sse2x2 xor() 943 MB/s [ 0.457024] raid6: sse2x4 gen() 2671 MB/s [ 0.474027] raid6: sse2x4 xor() 1615 MB/s [ 0.474551] raid6: using algorithm sse2x4 gen() 2671 MB/s [ 0.475026] raid6: .... xor() 1615 MB/s, rmw enabled [ 0.475589] raid6: using ssse3x2 recovery algorithm [ 0.479198] ACPI: Added _OSI(Module Device) [ 0.479860] ACPI: Added _OSI(Processor Device) [ 0.480031] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.480574] ACPI: Added _OSI(Processor Aggregator Device) [ 0.552500] ACPI: Interpreter enabled [ 0.553722] ACPI: (supports S0 S3 S4 S5) [ 0.554066] ACPI: Using IOAPIC for interrupt routing [ 0.555133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.564643] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.867965] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.868130] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.869212] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.872426] PCI host bridge to bus 0000:00 [ 0.872949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.873058] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.873840] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.874058] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window] [ 0.874924] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.875243] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.888075] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.899746] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.911053] pci 0000:00:01.1: reg 0x20: [io 0xc200-0xc20f] [ 0.916390] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.917059] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.918053] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.919050] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.929431] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.931670] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.932148] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.947139] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.949044] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 0.954044] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 0.964046] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.976639] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.979072] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.982059] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.994070] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 1.012683] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 1.015095] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 1.018076] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 1.025058] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref] [ 1.046295] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 1.049072] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 1.052072] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 1.061065] pci 0000:00:05.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref] [ 1.075419] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 1.078045] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 1.081038] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 1.089042] pci 0000:00:06.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref] [ 1.101187] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 1.104056] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 1.108037] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 1.115040] pci 0000:00:07.0: reg 0x20: [mem 0xfe00c000-0xfe00ffff 64bit pref] [ 1.128644] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 1.131052] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 1.134055] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 1.141070] pci 0000:00:08.0: reg 0x20: [mem 0xfe010000-0xfe013fff 64bit pref] [ 1.163343] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 1.166038] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 1.169037] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 1.176041] pci 0000:00:09.0: reg 0x20: [mem 0xfe014000-0xfe017fff 64bit pref] [ 1.189799] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 1.192052] pci 0000:00:0a.0: reg 0x10: [io 0xc1c0-0xc1ff] [ 1.195071] pci 0000:00:0a.0: reg 0x14: [mem 0xfebf7000-0xfebf7fff] [ 1.202062] pci 0000:00:0a.0: reg 0x20: [mem 0xfe018000-0xfe01bfff 64bit pref] [ 1.220798] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 1.223045] pci 0000:00:0b.0: reg 0x10: [mem 0xfebf8000-0xfebf800f] [ 1.249559] pci_bus 0000:00: on NUMA node 0 [ 1.295638] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.306447] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.317569] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.327937] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.333116] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.361180] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.362000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.362103] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.363027] vgaarb: loaded [ 1.376390] ACPI: bus type USB registered [ 1.378181] usbcore: registered new interface driver usbfs [ 1.379678] usbcore: registered new interface driver hub [ 1.380650] usbcore: registered new device driver usb [ 1.384573] media: Linux media interface: v0.10 [ 1.385621] Linux video capture interface: v2.00 [ 1.387621] pps_core: LinuxPPS API ver. 1 registered [ 1.388046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.389363] PTP clock support registered [ 1.392367] EDAC MC: Ver: 3.0.0 [ 1.395398] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 1.400633] FPGA manager framework [ 1.402926] Advanced Linux Sound Architecture Driver Initialized. [ 1.403045] PCI: Using ACPI for IRQ routing [ 1.403804] PCI: pci_cache_line_size set to 64 bytes [ 1.404766] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.405224] e820: reserve RAM buffer [mem 0x1ffd2000-0x1fffffff] [ 1.420365] clocksource: Switched to clocksource kvm-clock [ 1.465411] Warning: could not register annotated branches stats [ 2.590829] VFS: Disk quotas dquot_6.6.0 [ 2.591633] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.594798] pnp: PnP ACPI init [ 2.597443] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.599953] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.602822] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 2.604216] pnp 00:03: [dma 2] [ 2.605331] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.610105] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.614523] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.618882] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.637809] pnp: PnP ACPI: found 7 devices [ 2.658188] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.661316] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.662058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.662755] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.663553] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window] [ 2.668350] NET: Registered protocol family 1 [ 2.669402] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.670221] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.671392] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.672808] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.674481] PCI: CLS 0 bytes, default 64 [ 2.677496] Trying to unpack rootfs image as initramfs... [ 3.893414] debug: unmapping init [mem 0xffff88001fbf9000-0xffff88001ffcffff] [ 3.909316] Scanning for low memory corruption every 60 seconds [ 3.913887] cryptomgr_test (25) used greatest stack depth: 30104 bytes left [ 4.003710] AVX2 instructions are not detected. [ 4.005512] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 4.008935] spin_lock-torture: Creating torture_shuffle task [ 4.010828] spin_lock-torture: Creating torture_stutter task [ 4.012792] spin_lock-torture: torture_shuffle task started [ 4.014403] spin_lock-torture: Creating lock_torture_writer task [ 4.015996] spin_lock-torture: torture_stutter task started [ 4.017240] spin_lock-torture: Creating lock_torture_writer task [ 4.018760] spin_lock-torture: lock_torture_writer task started [ 4.020002] spin_lock-torture: Creating lock_torture_stats task [ 4.021487] spin_lock-torture: lock_torture_writer task started [ 4.026140] spin_lock-torture: lock_torture_stats task started [ 4.960380] tsc: Refined TSC clocksource calibration: 2693.509 MHz [ 4.961642] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34aa491a, max_idle_ns: 440795256568 ns [ 9.193711] Key type blacklist registered [ 9.195527] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 9.367107] JFS: nTxBlock = 2225, nTxLock = 17801 [ 9.382234] NILFS version 2 loaded [ 9.392702] OCFS2 User DLM kernel interface loaded [ 9.415440] gfs2: GFS2 installed [ 9.513309] io scheduler noop registered (default) [ 9.514478] io scheduler deadline registered [ 9.515590] io scheduler mq-deadline registered [ 9.517249] io scheduler kyber registered [ 9.521343] io scheduler bfq registered [ 14.716274] String selftests succeeded [ 14.717741] test_string_helpers: Running tests... [ 14.748501] test_hexdump: all 1184 tests passed [ 14.759744] test_firmware: interface ready [ 14.761568] test passed [ 14.762239] test_uuid: all 18 tests passed [ 14.765830] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 14.766811] crc32: self tests passed, processed 225944 bytes in 1212495 nsec [ 14.769359] crc32c: CRC_LE_BITS = 64 [ 14.770164] crc32c: self tests passed, processed 225944 bytes in 559948 nsec [ 15.029481] crc32_combine: 8373 self tests passed [ 15.313836] crc32c_combine: 8373 self tests passed [ 15.317649] xz_dec_test: module loaded [ 15.318395] xz_dec_test: Create a device node with 'mknod xz_dec_test c 244 0' and write .xz files to it. [ 15.320422] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 15.321791] interval tree insert/remove [ 15.407412] -> 230495 cycles [ 15.408752] interval tree search [ 16.392268] -> 2648917 cycles (2692 results) [ 16.401338] gpio_it87: no device [ 16.417540] ipmi message handler version 39.2 [ 16.418526] IPMI System Interface driver. [ 16.422504] ipmi_si: Unable to find any System Interface(s) [ 16.424606] IPMI SSIF Interface driver [ 16.426796] IPMI Watchdog: driver initialized [ 16.427702] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 16.434192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 16.436830] ACPI: Power Button [PWRF] [ 17.537395] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 17.570490] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 17.655224] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 17.712792] lp: driver loaded but no devices found [ 17.715235] Non-volatile memory driver v1.3 [ 17.719962] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 17.721257] smapi::smapi_init, ERROR invalid usSmapiID [ 17.733116] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 17.734731] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 17.736153] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 17.737396] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 17.799743] Floppy drive(s): fd0 is 2.88M AMI BIOS [ 17.853216] FDC 0 is a S82078B [ 18.026356] brd: module loaded [ 18.304157] null: module loaded [ 18.306617] lkdtm: No crash points registered, enable through debugfs [ 18.310146] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 18.313821] c2port c2port0: C2 port uc added [ 18.314633] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 18.320607] usbcore: registered new interface driver rtsx_usb [ 18.329710] usbcore: registered new interface driver viperboard [ 18.332570] Uniform Multi-Platform E-IDE driver [ 18.335463] ide-gd driver 1.18 [ 18.336457] ide-cd driver 5.00 [ 18.343667] HSI/SSI char device loaded [ 18.384291] mdio_bus fixed-0: GPIO lookup for consumer reset [ 18.385355] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 18.386627] mdio_bus fixed-0: lookup for GPIO reset failed [ 18.388182] libphy: Fixed MDIO Bus: probed [ 18.443243] vcan: Virtual CAN interface driver [ 18.445354] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 18.446698] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 36.837275] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 37.452821] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 37.454273] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 37.456579] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 37.457656] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 37.459573] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 37.460805] igb: Copyright (c) 2007-2014 Intel Corporation. [ 37.462555] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 37.463976] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 37.482677] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 37.483916] YAM driver version 0.8 by F1OAT/F6FBB [ 37.503788] AX.25: bpqether driver version 004 [ 37.504851] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 37.504851] baycom_ser_fdx: version 0.10 [ 37.526560] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 37.527839] hdlcdrv: version 0.8 [ 37.528642] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 37.528642] baycom_ser_hdx: version 0.10 [ 37.549602] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 37.549602] baycom_par: version 0.9 [ 37.572419] PPP generic driver version 2.4.2 [ 37.576521] PPP BSD Compression module registered [ 37.577482] PPP Deflate Compression module registered [ 37.578525] PPP MPPE Compression module registered [ 37.579468] NET: Registered protocol family 24 [ 37.580439] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 37.581834] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 37.583707] usbcore: registered new interface driver i2400m_usb [ 37.607770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 37.622434] ehci-pci: EHCI PCI platform driver [ 37.623926] ehci-platform: EHCI generic platform driver [ 37.625805] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 37.627130] ohci-pci: OHCI PCI platform driver [ 37.628529] ohci-platform: OHCI generic platform driver [ 37.631580] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 37.632672] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 37.649161] usbcore: registered new interface driver cdc_acm [ 37.650193] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 37.652179] usbcore: registered new interface driver usblp [ 37.653671] usbcore: registered new interface driver cdc_wdm [ 37.655247] usbcore: registered new interface driver usbtmc [ 37.657573] usbcore: registered new interface driver usbserial_generic [ 37.659516] usbserial: USB Serial support registered for generic [ 37.674405] usbcore: registered new interface driver ark3116 [ 37.676074] usbserial: USB Serial support registered for ark3116 [ 37.677550] usbcore: registered new interface driver cp210x [ 37.679185] usbserial: USB Serial support registered for cp210x [ 37.680660] usbcore: registered new interface driver cyberjack [ 37.682331] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 37.684244] usbcore: registered new interface driver usb_debug [ 37.685741] usbserial: USB Serial support registered for debug [ 37.700641] usbserial: USB Serial support registered for xhci_dbc [ 37.702287] usbcore: registered new interface driver digi_acceleport [ 37.703831] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 37.705683] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 37.707475] usbcore: registered new interface driver f81232 [ 37.708874] usbserial: USB Serial support registered for f81232 [ 37.710439] usbcore: registered new interface driver f81534 [ 37.711931] usbserial: USB Serial support registered for Fintek F81532/F81534 [ 37.726908] usbcore: registered new interface driver ftdi_sio [ 37.728520] usbserial: USB Serial support registered for FTDI USB Serial Device [ 37.730383] usbcore: registered new interface driver garmin_gps [ 37.731949] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 37.733639] usbcore: registered new interface driver ipaq [ 37.735151] usbserial: USB Serial support registered for PocketPC PDA [ 37.736720] usbcore: registered new interface driver ipw [ 37.738227] usbserial: USB Serial support registered for IPWireless converter [ 37.740257] usbcore: registered new interface driver iuu_phoenix [ 37.742154] usbserial: USB Serial support registered for iuu_phoenix [ 37.743846] usbcore: registered new interface driver keyspan [ 37.745484] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 37.747544] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 37.749378] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 37.751219] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 37.752994] usbcore: registered new interface driver kobil_sct [ 37.754675] usbserial: USB Serial support registered for KOBIL USB smart card terminal [ 37.756608] usbcore: registered new interface driver mct_u232 [ 37.758466] usbserial: USB Serial support registered for MCT U232 [ 37.760379] usbcore: registered new interface driver mos7720 [ 37.762142] usbserial: USB Serial support registered for Moschip 2 port adapter [ 37.763981] usbcore: registered new interface driver navman [ 37.765729] usbserial: USB Serial support registered for navman [ 37.767352] usbcore: registered new interface driver omninet [ 37.768818] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 37.770660] usbcore: registered new interface driver opticon [ 37.772223] usbserial: USB Serial support registered for opticon [ 37.773794] usbcore: registered new interface driver qcserial [ 37.775387] usbserial: USB Serial support registered for Qualcomm USB modem [ 37.776997] usbcore: registered new interface driver safe_serial [ 37.778639] usbserial: USB Serial support registered for safe_serial [ 37.780466] usbcore: registered new interface driver sierra [ 37.782168] usbserial: USB Serial support registered for Sierra USB modem [ 37.784178] usbcore: registered new interface driver usb_serial_simple [ 37.799529] usbserial: USB Serial support registered for carelink [ 37.801368] usbserial: USB Serial support registered for zio [ 37.802981] usbserial: USB Serial support registered for funsoft [ 37.804740] usbserial: USB Serial support registered for flashloader [ 37.806631] usbserial: USB Serial support registered for google [ 37.808371] usbserial: USB Serial support registered for vivopay [ 37.810234] usbserial: USB Serial support registered for moto_modem [ 37.825210] usbserial: USB Serial support registered for novatel_gps [ 37.826743] usbserial: USB Serial support registered for hp4x [ 37.828324] usbserial: USB Serial support registered for suunto [ 37.829808] usbserial: USB Serial support registered for siemens_mpi [ 37.831538] usbcore: registered new interface driver ssu100 [ 37.833277] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 37.835503] usbcore: registered new interface driver visor [ 37.850517] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 37.852400] usbserial: USB Serial support registered for Sony Clie 5.0 [ 37.854141] usbserial: USB Serial support registered for Sony Clie 3.5 [ 37.855809] usbcore: registered new interface driver wishbone_serial [ 37.857532] usbserial: USB Serial support registered for wishbone_serial [ 37.859411] usbcore: registered new interface driver whiteheat [ 37.861300] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 37.866784] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 37.868488] usbcore: registered new interface driver xsens_mt [ 37.869985] usbserial: USB Serial support registered for xsens_mt [ 37.871645] usbcore: registered new interface driver cypress_cy7c63 [ 37.873320] usbcore: registered new interface driver emi26 - firmware loader [ 37.893350] usbcore: registered new interface driver emi62 - firmware loader [ 37.894604] ftdi_elan: driver ftdi-elan [ 37.895881] usbcore: registered new interface driver ftdi-elan [ 37.897462] usbcore: registered new interface driver idmouse [ 37.898948] usbcore: registered new interface driver rio500 [ 37.900421] usbcore: registered new interface driver usbtest [ 37.920164] usbcore: registered new interface driver trancevibrator [ 37.921781] usbcore: registered new interface driver uss720 [ 37.922831] uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 37.924381] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 37.925629] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 37.926855] uss720: If you just want to connect to a printer, use usblp instead [ 37.940093] usbcore: registered new interface driver usbsevseg [ 37.942823] usbcore: registered new interface driver sisusb [ 37.944482] usbcore: registered new interface driver lvs [ 37.973646] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 37.975325] dummy_hcd dummy_hcd.0: Dummy host controller [ 37.979880] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 38.009565] hub 1-0:1.0: USB hub found [ 38.025145] hub 1-0:1.0: 1 port detected [ 38.048289] userial_init: registered 4 ttyGS* devices [ 38.049466] udc dummy_udc.0: registering UDC driver [zero] [ 38.051295] zero gadget: adding 'source/sink'/00000000bd016f09 to config 'source/sink'/00000000a453ddc7 [ 38.053114] zero gadget: dual speed source/sink: IN/ep1in-bulk, OUT/ep2out-bulk, ISO-IN/, ISO-OUT/ [ 38.054792] zero gadget: adding 'loopback'/0000000058f734fc to config 'loopback'/00000000c01da70d [ 38.056491] zero gadget: dual speed loopback: IN/ep1in-bulk, OUT/ep2out-bulk [ 38.057752] zero gadget: Gadget Zero, version: Cinco de Mayo 2008 [ 38.058889] zero gadget: zero ready [ 38.059695] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 38.061315] g_ffs: gfs_init() [ 38.062277] functionfs_init() [ 38.062918] file system registered [ 38.063623] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 38.065584] udc-core: couldn't find an available UDC - added [MIDI Gadget] to list of pending drivers [ 38.067524] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers [ 38.070254] udc-core: couldn't find an available UDC - added [dbgp] to list of pending drivers [ 38.071925] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers [ 38.073738] udc-core: couldn't find an available UDC - added [g_nokia] to list of pending drivers [ 38.075233] udc-core: couldn't find an available UDC - added [g_ncm] to list of pending drivers [ 38.076697] udc-core: couldn't find an available UDC - added [g_acm_ms] to list of pending drivers [ 38.082412] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 38.086324] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 [ 38.088466] vhci_hcd: created sysfs vhci_hcd.0 [ 38.142929] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 38.145363] hub 2-0:1.0: USB hub found [ 38.147419] hub 2-0:1.0: 8 ports detected [ 38.183822] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 38.187871] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3 [ 38.191281] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 38.205217] hub 3-0:1.0: USB hub found [ 38.207651] hub 3-0:1.0: 8 ports detected [ 38.336391] zero gadget: resume [ 38.336990] zero gadget: zero_resume [ 38.337690] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 38.391188] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 38.456360] zero gadget: resume [ 38.457049] zero gadget: zero_resume [ 38.457943] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 38.514143] dummy_udc dummy_udc.0: set_address = 2 [ 38.545411] usb 1-1: Dual-Role OTG device on HNP port [ 38.555107] zero gadget: HNP inactive [ 38.556053] zero gadget: high-speed config #3: source/sink [ 38.556054] zero gadget: source/sink disabled [ 38.556054] dummy_udc dummy_udc.0: enabled ep1in-bulk (ep1in-bulk) maxpacket 512 stream disabled [ 38.556054] dummy_udc dummy_udc.0: enabled ep2out-bulk (ep2out-bulk) maxpacket 512 stream disabled [ 38.556054] zero gadget: source/sink enabled, alt intf 0 [ 38.569428] usbtest 1-1:3.0: Linux gadget zero [ 38.570373] usbtest 1-1:3.0: high-speed {control in/out bulk-in bulk-out} tests (+alt) [ 38.577500] usbcore: registered new device driver usbip-host [ 38.589009] udc usbip-vudc.0: registering UDC driver [g_mass_storage] [ 38.591200] Mass Storage Function, version: 2009/09/11 [ 38.592360] LUN: removable file: (no medium) [ 38.593442] no file given for LUN0 [ 38.594589] g_mass_storage usbip-vudc.0: failed to start g_mass_storage: -22 [ 38.600881] udc usbip-vudc.0: releasing 'usbip-vudc.0' [ 38.604397] ================================================================== [ 38.605034] BUG: KASAN: double-free or invalid-free in (null) [ 38.605034] [ 38.605034] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc3 #468 [ 38.605034] Call Trace: [ 38.605034] dump_stack+0x2f/0x3e [ 38.605034] print_address_description+0xc2/0x3b7 [ 38.605034] kasan_report_double_free+0x50/0x8c [ 38.605034] kasan_slab_free+0x60/0x1ef [ 38.605034] ? ftrace_likely_update+0x5c/0xc4 [ 38.605034] ? kobj_kset_leave+0x193/0x1dc [ 38.605034] ? lock_acquired+0x8d2/0x8d2 [ 38.605034] ? ftrace_likely_update+0x5c/0xc4 [ 38.605034] ? trace_preempt_on+0x489/0x4d7 [ 38.605034] ? static_obj+0x40/0x40 [ 38.605034] ? kobject_put+0xf5/0x642 [ 38.605034] ? trace_hardirqs_off+0x17/0x1f [ 38.605034] ? kfree+0x419/0x5e7 [ 38.605034] kfree+0x43c/0x5e7 [ 38.605034] usb_add_gadget_udc_release+0x693/0x6ca [ 38.605034] usb_add_gadget_udc+0x29/0x35 [ 38.605034] vudc_probe+0x7e8/0x8fb [ 38.605034] ? put_vudc_device+0x4f/0x4f [ 38.605034] platform_drv_probe+0xa8/0x15e [ 38.605034] ? platform_drv_remove+0xac/0xac [ 38.605034] really_probe+0x5b7/0xc52 [ 38.605034] ? driver_allows_async_probing+0x72/0x72 [ 38.605034] driver_probe_device+0x20b/0x295 [ 38.605034] __device_attach_driver+0x2e8/0x301 [ 38.605034] bus_for_each_drv+0x125/0x1f0 [ 38.605034] ? subsys_find_device_by_id+0x306/0x306 [ 38.605034] ? _raw_spin_unlock_irqrestore+0xd9/0xfa [ 38.605034] __device_attach+0x1cc/0x339 [ 38.605034] ? device_bind_driver+0xdb/0xdb [ 38.605034] device_initial_probe+0x1f/0x28 [ 38.605034] bus_probe_device+0xd0/0x260 [ 38.605034] device_add+0xd68/0x1264 [ 38.605034] ? put_device+0x37/0x37 [ 38.605034] ? lockdep_init_map+0x5e/0x6b [ 38.605034] ? __raw_spin_lock_init+0x37/0xf5 [ 38.605034] platform_device_add+0x5a9/0x72e [ 38.605034] ? arch_setup_pdev_archdata+0x5/0xd [ 38.605034] init+0xfa/0x412 [ 38.605034] ? usbip_host_init+0x1b2/0x1b2 [ 38.605034] do_one_initcall+0x143/0x2d3 [ 38.605034] ? start_kernel+0xa20/0xa20 [ 38.605034] kernel_init_freeable+0x31f/0x469 [ 38.605034] ? rest_init+0x3d0/0x3d0 [ 38.605034] kernel_init+0x13/0x1fe [ 38.605034] ? rest_init+0x3d0/0x3d0 [ 38.605034] ret_from_fork+0x24/0x30 [ 38.605034] [ 38.605034] Allocated by task 1: [ 38.605034] kasan_kmalloc+0xec/0x1bb [ 38.605034] kmem_cache_alloc_trace+0x474/0x48d [ 38.605034] usb_add_gadget_udc_release+0x1de/0x6ca [ 38.605034] usb_add_gadget_udc+0x29/0x35 [ 38.605034] vudc_probe+0x7e8/0x8fb [ 38.605034] platform_drv_probe+0xa8/0x15e [ 38.605034] really_probe+0x5b7/0xc52 [ 38.605034] driver_probe_device+0x20b/0x295 [ 38.605034] __device_attach_driver+0x2e8/0x301 [ 38.605034] bus_for_each_drv+0x125/0x1f0 [ 38.605034] __device_attach+0x1cc/0x339 [ 38.605034] device_initial_probe+0x1f/0x28 [ 38.605034] bus_probe_device+0xd0/0x260 [ 38.605034] device_add+0xd68/0x1264 [ 38.605034] platform_device_add+0x5a9/0x72e [ 38.605034] init+0xfa/0x412 [ 38.605034] do_one_initcall+0x143/0x2d3 [ 38.605034] kernel_init_freeable+0x31f/0x469 [ 38.605034] kernel_init+0x13/0x1fe [ 38.605034] ret_from_fork+0x24/0x30 [ 38.605034] [ 38.605034] Freed by task 1: [ 38.605034] kasan_slab_free+0xf0/0x1ef [ 38.605034] kfree+0x43c/0x5e7 [ 38.605034] usb_udc_release+0xe3/0xef [ 38.605034] device_release+0x86/0x27e [ 38.605034] kobject_put+0x58d/0x642 [ 38.605034] put_device+0x2a/0x37 [ 38.605034] usb_add_gadget_udc_release+0x670/0x6ca [ 38.605034] usb_add_gadget_udc+0x29/0x35 [ 38.605034] vudc_probe+0x7e8/0x8fb [ 38.605034] platform_drv_probe+0xa8/0x15e [ 38.605034] really_probe+0x5b7/0xc52 [ 38.605034] driver_probe_device+0x20b/0x295 [ 38.605034] __device_attach_driver+0x2e8/0x301 [ 38.605034] bus_for_each_drv+0x125/0x1f0 [ 38.605034] __device_attach+0x1cc/0x339 [ 38.605034] device_initial_probe+0x1f/0x28 [ 38.605034] bus_probe_device+0xd0/0x260 [ 38.605034] device_add+0xd68/0x1264 [ 38.605034] platform_device_add+0x5a9/0x72e [ 38.605034] init+0xfa/0x412 [ 38.605034] do_one_initcall+0x143/0x2d3 [ 38.605034] kernel_init_freeable+0x31f/0x469 [ 38.605034] kernel_init+0x13/0x1fe [ 38.605034] ret_from_fork+0x24/0x30 [ 38.605034] [ 38.605034] The buggy address belongs to the object at ffff880014627700 [ 38.605034] which belongs to the cache kmalloc-2048 of size 2048 [ 38.605034] The buggy address is located 0 bytes inside of [ 38.605034] 2048-byte region [ffff880014627700, ffff880014627f00) [ 38.605034] The buggy address belongs to the page: [ 38.605034] page:000000005c87db2c count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 [ 38.605034] flags: 0x4000000000008100(slab|head) [ 38.605034] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800f000f [ 38.605034] raw: dead000000000100 dead000000000200 ffff880019c02300 0000000000000000 [ 38.605034] page dumped because: kasan: bad access detected [ 38.605034] [ 38.605034] Memory state around the buggy address: [ 38.605034] ffff880014627600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 38.605034] ffff880014627680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 38.605034] >ffff880014627700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 38.605034] ^ [ 38.605034] ffff880014627780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 38.605034] ffff880014627800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 38.605034] ================================================================== [ 38.605034] Disabling lock debugging due to kernel taint [ 38.707221] gadget: usb_udc_nop_release [ 38.708318] usbip-vudc: probe of usbip-vudc.0 failed with error -22 [ 38.712171] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 38.717118] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.719599] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.838347] mousedev: PS/2 mouse device common for all mice [ 38.840879] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 38.846046] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 38.848275] usbcore: registered new interface driver bcm5974 [ 38.849433] usbcore: registered new interface driver synaptics_usb [ 38.856809] usbcore: registered new interface driver iforce [ 38.864876] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 38.869226] usbcore: registered new interface driver xpad [ 38.871508] usbcore: registered new interface driver aiptek [ 38.873214] usbcore: registered new interface driver gtco [ 38.884088] usbcore: registered new interface driver usbtouchscreen [ 38.897394] rtc_cmos 00:00: RTC can wake from S4 [ 38.899431] rtc rtc0: alarm rollover: day [ 38.901722] rtc rtc0: rtc_cmos: dev (0:0) [ 38.902583] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 38.904438] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 38.923748] i2c /dev entries driver [ 38.926213] i2c-parport-light: adapter type unspecified [ 38.927584] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF [ 38.948953] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 38.951051] usbcore: registered new interface driver dvb_usb_af9015 [ 38.952585] usbcore: registered new interface driver dvb_usb_af9035 [ 38.954287] usbcore: registered new interface driver dvb_usb_anysee [ 38.955935] usbcore: registered new interface driver dvb_usb_az6007 [ 38.957602] usbcore: registered new interface driver dvb_usb_ce6230 [ 38.959103] usbcore: registered new interface driver dvb_usb_ec168 [ 38.960557] usbcore: registered new interface driver dvb_usb_gl861 [ 38.962235] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 38.963948] usbcore: registered new interface driver dvb_usb_dvbsky [ 38.965605] usbcore: registered new interface driver zd1301 [ 38.972706] usbcore: registered new interface driver b2c2_flexcop_usb [ 38.974098] au0828: au0828 driver loaded [ 38.975291] usbcore: registered new interface driver au0828 [ 38.976769] usbcore: registered new interface driver hdpvr [ 38.978845] usbcore: registered new interface driver pvrusb2 [ 38.979913] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 38.981510] pvrusb2: Debug mask is 31 (0x1f) [ 38.982712] usbcore: registered new interface driver stk1160 [ 38.984203] usbcore: registered new interface driver em28xx [ 38.985361] em28xx: Registered (Em28xx v4l2 Extension) extension [ 38.986581] em28xx: Registered (Em28xx Audio Extension) extension [ 38.988175] usbcore: registered new interface driver go7007 [ 38.989583] usbcore: registered new interface driver go7007-loader [ 38.991566] usbcore: registered new interface driver Abilis Systems as10x usb driver [ 38.993084] smssdio: Siano SMS1xxx SDIO driver [ 38.993979] smssdio: Copyright Pierre Ossman [ 38.995927] usbcore: registered new interface driver radioshark [ 38.997583] usbcore: registered new interface driver dsbr100 [ 38.999218] usbcore: registered new interface driver radio-si470x [ 39.001313] usbcore: registered new interface driver radio-usb-si4713 [ 39.003309] usbcore: registered new interface driver radio-mr800 [ 39.004969] usbcore: registered new interface driver radio-keene [ 39.007890] usbcore: registered new interface driver radio-raremono [ 39.010501] pps pps0: new PPS source ktimer [ 39.011424] pps pps0: ktimer PPS source registered [ 39.012451] pps_parport: parallel port PPS client [ 39.013815] Driver for 1-wire Dallas network protocol. [ 39.016370] usbcore: registered new interface driver DS9490R [ 39.024651] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 39.026602] w1_f0d_init() [ 39.028266] __power_supply_register: Expected proper parent device for 'test_ac' [ 39.030907] __power_supply_register: Expected proper parent device for 'test_battery' [ 39.035560] __power_supply_register: Expected proper parent device for 'test_usb' [ 39.051717] applesmc: supported laptop not found! [ 39.052844] applesmc: driver init failed (ret=-19)! [ 39.070220] pc87360: PC8736x not detected, module not inserted [ 39.083280] device-mapper: uevent: version 1.0.3 [ 39.088222] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 39.093830] device-mapper: multipath round-robin: version 1.2.0 loaded [ 39.095267] device-mapper: multipath queue-length: version 0.2.0 loaded [ 39.096663] device-mapper: multipath service-time: version 0.3.0 loaded [ 39.098917] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 39.100090] device-mapper: raid: Loading target version 1.13.0 [ 39.179422] ISDN subsystem Rev: 1.1.2.3/ [ 39.179437] 1.1.2.2/ [ 39.180364] none/ [ 39.180829] 1.1.2.2/ [ 39.181300] 1.1.2.2 [ 39.181751] [ 39.184330] CAPI 2.0 started up with major 68 (no middleware) [ 39.185562] dss1_divert module successfully installed [ 39.186578] HiSax: Linux Driver for passive ISDN cards [ 39.187574] HiSax: Version 3.5 (kernel) [ 39.188341] HiSax: Layer1 Revision 2.46.2.5 [ 39.189198] HiSax: Layer2 Revision 2.30.2.4 [ 39.189999] HiSax: TeiMgr Revision 2.20.2.3 [ 39.190817] HiSax: Layer3 Revision 2.22.2.3 [ 39.191670] HiSax: LinkLayer Revision 2.59.2.4 [ 39.192748] HiSax: Total 1 card defined [ 39.193815] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) [ 39.194800] HiSax: Niccy driver Rev. 1.21.2.4 [ 39.195688] Niccy: No PCI card found [ 39.196536] HiSax: Card NICCY not installed ! [ 39.197505] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $ [ 39.199396] usbcore: registered new interface driver st5481_usb [ 39.200638] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0) [ 39.202555] usbcore: registered new interface driver hfc_usb [ 39.203788] isdnloop: (loop0) virtual card added [ 39.206525] sdhci: Secure Digital Host Controller Interface driver [ 39.207699] sdhci: Copyright(c) Pierre Ossman [ 39.209369] usbcore: registered new interface driver ushc [ 39.219301] ledtrig-cpu: registered to indicate activity on CPUs [ 39.230498] hidraw: raw HID events driver (C) Jiri Kosina [ 39.253267] usbcore: registered new interface driver usbhid [ 39.254380] usbhid: USB HID core driver [ 39.376579] usbcore: registered new interface driver snd-usb-audio [ 39.391511] usbcore: registered new interface driver snd-usb-usx2y [ 39.393161] usbcore: registered new interface driver snd-usb-us122l [ 39.394787] usbcore: registered new interface driver snd-usb-caiaq [ 39.396464] usbcore: registered new interface driver snd-usb-hiface [ 39.398121] usbcore: registered new interface driver snd-bcd2000 [ 39.399653] usbcore: registered new interface driver snd_usb_podhd [ 39.401190] usbcore: registered new interface driver snd_usb_variax [ 39.420847] u32 classifier [ 39.421487] input device check on [ 39.422386] NET: Registered protocol family 15 [ 39.424215] NET: Registered protocol family 4 [ 39.425497] NET: Registered protocol family 5 [ 39.426757] NET: Registered protocol family 9 [ 39.427919] X25: Linux Version 0.2 [ 39.455704] NET: Registered protocol family 6 [ 39.495667] NET: Registered protocol family 11 [ 39.496894] NET: Registered protocol family 3 [ 39.497891] can: controller area network core (rev 20170425 abi 9) [ 39.500803] NET: Registered protocol family 29 [ 39.501734] can: netlink gateway (rev 20170425) max_hops=1 [ 39.503785] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 39.508407] DECnet: Routing cache hash table of 128 buckets, 11Kbytes [ 39.510799] NET: Registered protocol family 12 [ 39.512052] NET: Registered protocol family 35 [ 39.515971] NET: Registered protocol family 37 [ 39.524992] batman_adv: B.A.T.M.A.N. advanced 2017.4 (compatibility version 15) loaded [ 39.527605] start plist test [ 39.645724] end plist test [ 39.663504] ... APIC ID: 00000000 (0) [ 39.664021] ... APIC VERSION: 01050014 [ 39.664021] 0000000000000000000000000000000000000000000000000000000000000000 [ 39.664021] 0000000000000000000000000000000000000000000000000000000000004000 [ 39.669724] number of MP IRQ sources: 15. [ 39.670597] number of IO-APIC #0 registers: 24. [ 39.671604] testing the IO APIC....................... [ 39.672717] IO APIC #0...... [ 39.673409] .... register #00: 00000000 [ 39.674253] ....... : physical APIC id: 00 [ 39.688353] ....... : Delivery Type: 0 [ 39.689264] ....... : LTS : 0 [ 39.690162] .... register #01: 00170011 [ 39.690969] ....... : max redirection entries: 17 [ 39.691986] ....... : PRQ implemented: 0 [ 39.692930] ....... : IO APIC version: 11 [ 39.693891] .... register #02: 00000000 [ 39.694758] ....... : arbitration: 00 [ 39.695661] .... IRQ redirection table: [ 39.696526] IOAPIC 0: [ 39.697090] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.698562] pin01, enabled , edge , high, V(23), IRR(0), S(0), logical , D(01), M(1) [ 39.700008] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1) [ 39.701614] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.703114] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.704636] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.706162] pin06, enabled , edge , high, V(21), IRR(0), S(0), logical , D(01), M(1) [ 39.707649] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.709195] pin08, enabled , edge , high, V(24), IRR(0), S(0), logical , D(01), M(1) [ 39.710697] pin09, enabled , level, high, V(20), IRR(0), S(0), logical , D(01), M(1) [ 39.712208] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.713756] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.715352] pin0c, enabled , edge , high, V(22), IRR(0), S(0), logical , D(01), M(1) [ 39.716914] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.718454] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.719906] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.721518] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.723081] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.724499] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.725992] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.740814] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.742433] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.744135] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.745809] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 39.747306] IRQ to pin mappings: [ 39.747922] IRQ0 -> 0:2 [ 39.748469] IRQ1 -> 0:1 [ 39.749004] IRQ3 -> 0:3 [ 39.749588] IRQ4 -> 0:4 [ 39.750169] IRQ5 -> 0:5 [ 39.750732] IRQ6 -> 0:6 [ 39.751288] IRQ7 -> 0:7 [ 39.751830] IRQ8 -> 0:8 [ 39.752456] IRQ9 -> 0:9 [ 39.753380] IRQ10 -> 0:10 [ 39.765742] IRQ11 -> 0:11 [ 39.766295] IRQ12 -> 0:12 [ 39.766806] IRQ13 -> 0:13 [ 39.767351] IRQ14 -> 0:14 [ 39.767862] IRQ15 -> 0:15 [ 39.768364] .................................... done. [ 39.769583] AVX version of gcm_enc/dec engaged. [ 39.770489] AES CTR mode by8 optimization enabled [ 39.800328] sched_clock: Marking stable (39800018449, 0)->(41378765436, -1578746987) [ 39.807257] page_owner is disabled [ 39.834572] rtc_cmos 00:00: setting system clock to 2017-12-17 04:11:07 UTC (1513483867) [ 39.838240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 39.839393] EDD information not available. [ 39.841615] ALSA device list: [ 39.842259] No soundcards found. [ 39.845233] debug: unmapping init [mem 0xffffffff8772f000-0xffffffff878f7fff] [ 39.847655] Write protecting the kernel read-only data: 65536k [ 39.863808] debug: unmapping init [mem 0xffff880003b64000-0xffff880003bfffff] [ 39.865626] debug: unmapping init [mem 0xffff880004f8d000-0xffff880004ffffff] [ 39.912590] mount (221) used greatest stack depth: 28016 bytes left [ 39.931300] stty (222) used greatest stack depth: 27888 bytes left /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found [ 39.949178] S00fbsetup (224) used greatest stack depth: 27824 bytes left Please wait: booting... [ 40.001170] grep (230) used greatest stack depth: 27664 bytes left Starting udev /etc/rcS.d/S03udev: line 72: can't create /proc/sys/kernel/hotplug: nonexistent directory [ 40.312712] udevd (238) used greatest stack depth: 27264 bytes left Elapsed time: 40 qemu-img create -f qcow2 disk-yocto-ivb41-57-0 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-1 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-2 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-3 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-4 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-5 256G qemu-img create -f qcow2 disk-yocto-ivb41-57-6 256G kvm=( qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel $kernel -initrd /osimage/yocto/yocto-trinity-x86_64.cgz -m 512 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=disk-yocto-ivb41-57-0,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-1,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-2,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-3,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-4,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-5,media=disk,if=virtio -drive file=disk-yocto-ivb41-57-6,media=disk,if=virtio -serial stdio -display none -monitor null ) append=( root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw branch=linux-devel/devel-hourly-2017121623 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-12170213/gcc-6/50c4c4e268a2d7a3e58ebb698ac74da0de40ae36/vmlinuz-4.15.0-rc3 drbd.minor_count=8 ) "${kvm[@]}" -append "${append[*]}"