| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAfSe-uh60=k+vkBsQdfLBOZJT_pCfsgt-KRLRvs-bwGVLQqpA@mail.gmail.com>
Date: Mon, 18 Dec 2017 17:46:29 +0800
From: Chunyan Zhang <zhang.lyra@...il.com>
To: Chunyan Zhang <chunyan.zhang@...eadtrum.com>
Cc: Stephen Boyd <sboyd@...eaurora.org>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
linux-clk <linux-clk@...r.kernel.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Arnd Bergmann <arnd@...db.de>, Mark Brown <broonie@...nel.org>,
Xiaolong Zhang <xiaolong.zhang@...eadtrum.com>,
Ben Li <ben.li@...eadtrum.com>,
Orson Zhai <orson.zhai@...eadtrum.com>
Subject: Re: [PATCH V7 00/12] add clock driver for Spreadtrum platforms
Hi,
Since holidays are comming for many people, and then the next merge
window will come soon after holidays?
If you have any comments, please let me know, I hope this patchset can
be merged into the following merge window.
Wish you all a Merry Christmas and Happy New Year!
Thanks,
Chunyan
On 7 December 2017 at 20:57, Chunyan Zhang <chunyan.zhang@...eadtrum.com> wrote:
> From: Chunyan Zhang <zhang.chunyan@...aro.org>
>
> This series adds Spreadtrum clock support together with its binding
> documentation and devicetree data.
>
> Any comments would be greatly appreciated.
>
> Thanks,
> Chunyan
>
> Changes from V6: (https://lkml.org/lkml/2017/11/27/217)
> * Changed to use "//" format for the file header
> * Addressed Stephen's comments:
> - Put the common macros in clk-provider.h instead of clk_common.h, also removed
> the same macros from sunxi-ng/ccu_common.h and zte/clk.h;
> - Removed CLK_FIXED_RATE(), and moved the fixed rate clocks from driver to DT;
> - Use devm_of_clk_add_hw_provider() instead;
> - Removed sprd_regmap_{read|write}(), use regmap API directly;
> - Removed all full stop on error messages.
> * Use IS_ERR_OR_NULL() instead of IS_ERR() for checking regmap pointers;
>
> Changes from V5: (https://lkml.org/lkml/2017/11/20/21)
> * Rebased the whole patch-set to 4.15-rc1;
> * Fixed kbuild-test warnings;
> * Switched to use devm_clk_hw_register() instead of clk_hw_register();
> * Removed useless debug information from sc9860-clk.c.
>
> Changes from V4: (https://lkml.org/lkml/2017/11/10/30)
> * Added acked-by of Rob Herring;
> * Removed spin lock from Spreadtrum's gate, mux, div drivers, since we have
> switched to use regmap.
>
> Changes from V3: (https://lkml.org/lkml/2017/11/2/61)
> * Addressed comments from Julien Thierry:
> - Clean the if branch of sprd_mux_helper_get_parent()
> - Have the Gate clock macros and ops for both mode (i.e. sc_gate and gate) separate;
> - Have the Mux clock macros with/without table separate, and same changes
> for the composite clock.
> * Switched the function name from _endisable to _toggle;
> * Fixed Kbuild test error:
> - Added exporting sprd_clk_regmap_init() which would be used in other module(s);
> * Change the function sprd_clk_set_regmap() to the static one, and removed the
> declear from the include file;
> * Addressed comments from Rob:
> - Separate the dt-binding include file from the driver patch;
> - Documented more for the property "clocks"
> * Changed the syscon device names;
> * Changed the name of 'sprd_mux_internal' to 'sprd_mux_ssel'
>
>
> Changes from V2: (http://lkml.iu.edu/hypermail/linux/kernel/1707.1/01504.html)
> * Switch to use regmap to access registers;
> * Splited all clocks into 16 separated nodes, for each belongs to a single address area;
> * Rearranged the order of clock declaration in sc9860-clk.c, sorted them upon the address area;
> * Added syscon device tree nodes which will be quoted by the node of clocks which are in
> the same address area with the syscon device;
> * Revised the binding documentation according to the dt modification.
>
> Changes from V1: (https://lkml.org/lkml/2017/6/17/356)
> * Address Stephen's comments:
> - Switch to use platform device driver instead of the DT probing mechanism.
> - Move the common clock macro out from vendor directory, but need to remove those
> overlap code from other vendors (such as sunxi-ng) once this get merged.
> - Add support to be built as a module.
> - Add 'sprd_' prefix for all spin locks used in these drivers.
> - Mark input parameter of sprd_x with const.
> - Remove unreasonable dependencies to CONFIG_64BIT.
> - Add readl() after writing the same register.
> - Remove CLK_IS_BASIC which is no longer used.
> - Remove unnecessery CLK_IGNORE_UNUSED when defining a clock.
> - Change to expose all clock index.
> - Use clk_ instead of ccu.
> - Add Kconfig for sprd clocks.
> - Move the fixed clocks out from the soc node.
> - Switch to use 64-bit math in pll driver instead of 32-bit math.
> * Revise binding documentation according to dt modification.
> * Rename sc9860.c to sc9860-clk.c
>
>
> Chunyan Zhang (12):
> drivers: move clock common macros out from vendor directories
> clk: sprd: Add common infrastructure
> clk: sprd: add gate clock support
> clk: sprd: add mux clock support
> clk: sprd: add divider clock support
> clk: sprd: add composite clock support
> clk: sprd: add adjustable pll support
> dt-bindings: Add Spreadtrum clock binding documentation
> clk: sprd: Add dt-bindings include file for SC9860
> clk: sprd: add clocks support for SC9860
> arm64: dts: add syscon for whale2 platform
> arm64: dts: add clocks for SC9860
>
> Documentation/devicetree/bindings/clock/sprd.txt | 63 +
> arch/arm64/boot/dts/sprd/sc9860.dtsi | 115 ++
> arch/arm64/boot/dts/sprd/whale2.dtsi | 62 +-
> drivers/clk/Kconfig | 1 +
> drivers/clk/Makefile | 1 +
> drivers/clk/sprd/Kconfig | 14 +
> drivers/clk/sprd/Makefile | 11 +
> drivers/clk/sprd/common.c | 96 ++
> drivers/clk/sprd/common.h | 38 +
> drivers/clk/sprd/composite.c | 60 +
> drivers/clk/sprd/composite.h | 51 +
> drivers/clk/sprd/div.c | 90 +
> drivers/clk/sprd/div.h | 75 +
> drivers/clk/sprd/gate.c | 111 ++
> drivers/clk/sprd/gate.h | 59 +
> drivers/clk/sprd/mux.c | 76 +
> drivers/clk/sprd/mux.h | 74 +
> drivers/clk/sprd/pll.c | 266 +++
> drivers/clk/sprd/pll.h | 108 ++
> drivers/clk/sprd/sc9860-clk.c | 1974 ++++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu_common.h | 29 -
> drivers/clk/zte/clk.h | 18 -
> include/dt-bindings/clock/sprd,sc9860-clk.h | 404 +++++
> include/linux/clk-provider.h | 38 +
> 24 files changed, 3785 insertions(+), 49 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
> create mode 100644 drivers/clk/sprd/Kconfig
> create mode 100644 drivers/clk/sprd/Makefile
> create mode 100644 drivers/clk/sprd/common.c
> create mode 100644 drivers/clk/sprd/common.h
> create mode 100644 drivers/clk/sprd/composite.c
> create mode 100644 drivers/clk/sprd/composite.h
> create mode 100644 drivers/clk/sprd/div.c
> create mode 100644 drivers/clk/sprd/div.h
> create mode 100644 drivers/clk/sprd/gate.c
> create mode 100644 drivers/clk/sprd/gate.h
> create mode 100644 drivers/clk/sprd/mux.c
> create mode 100644 drivers/clk/sprd/mux.h
> create mode 100644 drivers/clk/sprd/pll.c
> create mode 100644 drivers/clk/sprd/pll.h
> create mode 100644 drivers/clk/sprd/sc9860-clk.c
> create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h
>
> --
> 2.7.4
>
Powered by blists - more mailing lists