| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANc+2y5itUahW9s9buhUxkM-tYQQqT3EU4JYGZaZk_a6rpN+Bg@mail.gmail.com>
Date: Mon, 18 Dec 2017 18:56:30 +0530
From: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>
To: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Cc: Ralf Baechle <ralf@...ux-mips.org>, linux-mips@...ux-mips.org,
open list <linux-kernel@...r.kernel.org>,
Sebastian Reichel <sre@...nel.org>, linux-pm@...r.kernel.org
Subject: Re: [PATCH v2 08/13] power: reset: Add a driver for the Microsemi
Ocelot reset
Hi Alexandre,
On 8 December 2017 at 21:16, Alexandre Belloni
<alexandre.belloni@...e-electrons.com> wrote:
> The Microsemi Ocelot SoC has a register allowing to reset the MIPS core.
> Unfortunately, the syscon-reboot driver can't be used directly (but almost)
> as the reset control may be disabled using another register.
>
> Cc: Sebastian Reichel <sre@...nel.org>
> Cc: linux-pm@...r.kernel.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
> ---
> drivers/power/reset/Kconfig | 7 ++++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/ocelot-reset.c | 86 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 94 insertions(+)
> create mode 100644 drivers/power/reset/ocelot-reset.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index ca0de1a78e85..2372f8e1040d 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -113,6 +113,13 @@ config POWER_RESET_MSM
> help
> Power off and restart support for Qualcomm boards.
>
> +config POWER_RESET_OCELOT_RESET
> + bool "Microsemi Ocelot reset driver"
> + depends on MSCC_OCELOT || COMPILE_TEST
> + select MFD_SYSCON
> + help
> + This driver supports restart for Microsemi Ocelot SoC.
> +
> config POWER_RESET_PIIX4_POWEROFF
> tristate "Intel PIIX4 power-off driver"
> depends on PCI
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index aeb65edb17b7..df9d92291c67 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
> obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
> obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
> obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
> new file mode 100644
> index 000000000000..1fb14bf17191
> --- /dev/null
> +++ b/drivers/power/reset/ocelot-reset.c
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Microsemi MIPS SoC reset driver
> + *
> + * License: Dual MIT/GPL
> + * Copyright (c) 2017 Microsemi Corporation
> + */
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/notifier.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/regmap.h>
> +
> +struct ocelot_reset_context {
> + struct regmap *chip_regs;
> + struct regmap *cpu_ctrl;
> + struct notifier_block restart_handler;
> +};
> +
> +#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
> +#define CORE_RST_PROTECT BIT(2)
> +
> +#define CHIP_REGS_SOFT_RST 0x8
> +#define SOFT_CHIP_RST BIT(0)
> +
> +static int ocelot_restart_handle(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + struct ocelot_reset_context *ctx = container_of(this, struct
> + ocelot_reset_context,
> + restart_handler);
> +
> + /* Make sure the core is not protected from reset */
> + regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
> + CORE_RST_PROTECT, 0);
> +
> + regmap_write(ctx->chip_regs, CHIP_REGS_SOFT_RST, SOFT_CHIP_RST);
> +
> + pr_emerg("Unable to restart system\n");
> + return NOTIFY_DONE;
> +}
> +
> +static int ocelot_reset_probe(struct platform_device *pdev)
> +{
> + struct ocelot_reset_context *ctx;
> + struct device *dev = &pdev->dev;
> + int err;
> +
> + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->chip_regs = syscon_node_to_regmap(of_get_parent(dev->of_node));
> + if (IS_ERR(ctx->chip_regs))
> + return PTR_ERR(ctx->chip_regs);
> +
> + ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
> + if (IS_ERR(ctx->cpu_ctrl))
> + return PTR_ERR(ctx->cpu_ctrl);
> +
> + ctx->restart_handler.notifier_call = ocelot_restart_handle;
> + ctx->restart_handler.priority = 192;
> + err = register_restart_handler(&ctx->restart_handler);
> + if (err)
> + dev_err(dev, "can't register restart notifier (err=%d)\n", err);
> +
> + return err;
> +}
> +
> +static const struct of_device_id ocelot_reset_of_match[] = {
> + { .compatible = "mscc,ocelot-chip-reset" },
> + {}
> +};
> +
> +static struct platform_driver ocelot_reset_driver = {
> + .probe = ocelot_reset_probe,
> + .driver = {
> + .name = "ocelot-chip-reset",
> + .of_match_table = ocelot_reset_of_match,
> + },
> +};
> +builtin_platform_driver(ocelot_reset_driver);
> --
> 2.15.1
>
>
Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>
Regards,
PrasannaKumar
Powered by blists - more mailing lists