| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <daaa7e08af012047baed61a79ed5dc62e5738766.1513608243.git.fbarrat@linux.vnet.ibm.com>
Date: Mon, 18 Dec 2017 16:21:17 +0100
From: Frederic Barrat <fbarrat@...ux.vnet.ibm.com>
To: linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Cc: arnd@...db.de, gregkh@...uxfoundation.org, mpe@...erman.id.au,
andrew.donnellan@....ibm.com, alastair@....ibm.com
Subject: [PATCH 04/13] powerpc/powernv: Add platform-specific services for opencapi
Implement a few platform-specific calls which can be used by drivers:
- provide the Transaction Layer capabilities of the host, so that the
driver can find some common ground and configure the device and host
appropriately.
- provide the hw interrupt to be used for translation faults raised by
the NPU
- map/unmap some NPU mmio registers to get the fault context when the
NPU raises an address translation fault
The rest are wrappers around the previously-introduced opal calls.
Signed-off-by: Frederic Barrat <fbarrat@...ux.vnet.ibm.com>
---
arch/powerpc/include/asm/pnv-ocxl.h | 36 ++++++
arch/powerpc/platforms/powernv/Makefile | 1 +
arch/powerpc/platforms/powernv/ocxl.c | 187 ++++++++++++++++++++++++++++++++
3 files changed, 224 insertions(+)
create mode 100644 arch/powerpc/include/asm/pnv-ocxl.h
create mode 100644 arch/powerpc/platforms/powernv/ocxl.c
diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h
new file mode 100644
index 000000000000..b9ab3f0a9634
--- /dev/null
+++ b/arch/powerpc/include/asm/pnv-ocxl.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PVN_OCXL_H
+#define _ASM_PVN_OCXL_H
+
+#include <linux/pci.h>
+
+#define PNV_OCXL_TL_MAX_TEMPLATE 63
+#define PNV_OCXL_TL_BITS_PER_RATE 4
+#define PNV_OCXL_TL_RATE_BUF_SIZE ((PNV_OCXL_TL_MAX_TEMPLATE+1) * PNV_OCXL_TL_BITS_PER_RATE / 8)
+
+extern int pnv_ocxl_get_tl_cap(struct pci_dev *dev, long *cap,
+ char *rate_buf, int rate_buf_size);
+extern int pnv_ocxl_set_tl_conf(struct pci_dev *dev, long cap,
+ uint64_t rate_buf_phys, int rate_buf_size);
+
+extern int pnv_ocxl_get_xsl_irq(struct pci_dev *dev, int *hwirq);
+extern void pnv_ocxl_unmap_xsl_regs(void __iomem *dsisr, void __iomem *dar,
+ void __iomem *tfc, void __iomem *pe_handle);
+extern int pnv_ocxl_map_xsl_regs(struct pci_dev *dev, void __iomem **dsisr,
+ void __iomem **dar, void __iomem **tfc,
+ void __iomem **pe_handle);
+
+extern int pnv_ocxl_spa_setup(struct pci_dev *dev, void *spa_mem, int PE_mask,
+ void **platform_data);
+extern void pnv_ocxl_spa_release(void *platform_data);
+extern int pnv_ocxl_spa_remove_pe(void *platform_data, int pe_handle);
+
+#endif /* _ASM_PVN_OCXL_H */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 3732118a0482..6c9d5199a7e2 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
obj-$(CONFIG_PPC_MEMTRACE) += memtrace.o
obj-$(CONFIG_PPC_VAS) += vas.o vas-window.o vas-debug.o
obj-$(CONFIG_PPC_FTW) += nx-ftw.o
+obj-$(CONFIG_OCXL_BASE) += ocxl.o
diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c
new file mode 100644
index 000000000000..3378b75cf5e5
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/ocxl.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/pnv-ocxl.h>
+#include <asm/opal.h>
+#include "pci.h"
+
+#define PNV_OCXL_TL_P9_RECV_CAP 0x000000000000000Full
+/* PASIDs are 20-bit, but on P9, NPU can only handle 15 bits */
+#define PNV_OCXL_PASID_BITS 15
+#define PNV_OCXL_PASID_MAX ((1 << PNV_OCXL_PASID_BITS) - 1)
+
+
+static void set_templ_rate(unsigned int templ, unsigned int rate, char *buf)
+{
+ int shift, idx;
+
+ WARN_ON(templ > PNV_OCXL_TL_MAX_TEMPLATE);
+ idx = (PNV_OCXL_TL_MAX_TEMPLATE - templ) / 2;
+ shift = 4 * (1 - ((PNV_OCXL_TL_MAX_TEMPLATE - templ) % 2));
+ buf[idx] |= rate << shift;
+}
+
+int pnv_ocxl_get_tl_cap(struct pci_dev *dev, long *cap,
+ char *rate_buf, int rate_buf_size)
+{
+ if (rate_buf_size != PNV_OCXL_TL_RATE_BUF_SIZE)
+ return -EINVAL;
+ /*
+ * The TL capabilities are a characteristic of the NPU, so
+ * we go with hard-coded values.
+ *
+ * The receiving rate of each template is encoded on 4 bits.
+ *
+ * On P9:
+ * - templates 0 -> 3 are supported
+ * - templates 0, 1 and 3 have a 0 receiving rate
+ * - template 2 has receiving rate of 1 (extra cycle)
+ */
+ memset(rate_buf, 0, rate_buf_size);
+ set_templ_rate(2, 1, rate_buf);
+ *cap = PNV_OCXL_TL_P9_RECV_CAP;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_get_tl_cap);
+
+int pnv_ocxl_set_tl_conf(struct pci_dev *dev, long cap,
+ uint64_t rate_buf_phys, int rate_buf_size)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ int rc;
+
+ if (rate_buf_size != PNV_OCXL_TL_RATE_BUF_SIZE)
+ return -EINVAL;
+
+ rc = opal_npu_tl_set(phb->opal_id, dev->devfn, cap,
+ rate_buf_phys, rate_buf_size);
+ if (rc) {
+ dev_err(&dev->dev, "Can't configure host TL: %d\n", rc);
+ return -EINVAL;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_set_tl_conf);
+
+int pnv_ocxl_get_xsl_irq(struct pci_dev *dev, int *hwirq)
+{
+ int rc;
+
+ rc = of_property_read_u32(dev->dev.of_node, "ibm,opal-xsl-irq", hwirq);
+ if (rc) {
+ dev_err(&dev->dev,
+ "Can't translation xsl interrupt for device\n");
+ return rc;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_get_xsl_irq);
+
+void pnv_ocxl_unmap_xsl_regs(void __iomem *dsisr, void __iomem *dar,
+ void __iomem *tfc, void __iomem *pe_handle)
+{
+ iounmap(dsisr);
+ iounmap(dar);
+ iounmap(tfc);
+ iounmap(pe_handle);
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_unmap_xsl_regs);
+
+int pnv_ocxl_map_xsl_regs(struct pci_dev *dev, void __iomem **dsisr,
+ void __iomem **dar, void __iomem **tfc,
+ void __iomem **pe_handle)
+{
+ u64 reg;
+ int i, j, rc = 0;
+ void __iomem *regs[4];
+
+ /*
+ * opal stores the mmio addresses of the DSISR, DAR, TFC and
+ * PE_HANDLE registers in a device tree property, in that
+ * order
+ */
+ for (i = 0; i < 4; i++) {
+ rc = of_property_read_u64_index(dev->dev.of_node,
+ "ibm,opal-xsl-mmio", i, ®);
+ if (rc)
+ break;
+ regs[i] = ioremap(reg, 8);
+ if (!regs[i]) {
+ rc = -EINVAL;
+ break;
+ }
+ }
+ if (rc) {
+ dev_err(&dev->dev, "Can't map translation mmio registers\n");
+ for (j = i - 1; j >= 0; j--)
+ iounmap(regs[j]);
+ } else {
+ *dsisr = regs[0];
+ *dar = regs[1];
+ *tfc = regs[2];
+ *pe_handle = regs[3];
+ }
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_map_xsl_regs);
+
+struct spa_data {
+ u64 phb_opal_id;
+ u32 bdfn;
+};
+
+int pnv_ocxl_spa_setup(struct pci_dev *dev, void *spa_mem, int PE_mask,
+ void **platform_data)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct spa_data *data;
+ u32 bdfn;
+ int rc;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ bdfn = (dev->bus->number << 8) | dev->devfn;
+ rc = opal_npu_spa_setup(phb->opal_id, bdfn, virt_to_phys(spa_mem),
+ PE_mask);
+ if (rc) {
+ dev_err(&dev->dev, "Can't setup Shared Process Area: %d\n", rc);
+ kfree(data);
+ return rc;
+ }
+ data->phb_opal_id = phb->opal_id;
+ data->bdfn = bdfn;
+ *platform_data = (void *) data;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_spa_setup);
+
+void pnv_ocxl_spa_release(void *platform_data)
+{
+ struct spa_data *data = (struct spa_data *) platform_data;
+ int rc;
+
+ rc = opal_npu_spa_setup(data->phb_opal_id, data->bdfn, 0, 0);
+ WARN_ON(rc);
+ kfree(data);
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_spa_release);
+
+int pnv_ocxl_spa_remove_pe(void *platform_data, int pe_handle)
+{
+ struct spa_data *data = (struct spa_data *) platform_data;
+ int rc;
+
+ rc = opal_npu_spa_clear_cache(data->phb_opal_id, data->bdfn, pe_handle);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pnv_ocxl_spa_remove_pe);
--
2.14.1
Powered by blists - more mailing lists