linux-kernel - [PATCH v2 2/2] dt/bindings: Add bindings for Layerscape external irqs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1513758631-19909-2-git-send-email-rasmus.villemoes@prevas.dk>
Date:   Wed, 20 Dec 2017 09:30:30 +0100
From:   Rasmus Villemoes <rasmus.villemoes@...vas.dk>
To:     Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Marc Zyngier <marc.zyngier@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
CC:     Andy Tang <andy.tang@....com>, Shawn Guo <shawnguo@...nel.org>,
        Alexander Stein <alexander.stein@...tec-electronic.com>,
        Rasmus Villemoes <rasmus.villemoes@...vas.dk>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH v2 2/2] dt/bindings: Add bindings for Layerscape external irqs

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@...vas.dk>
---
 .../interrupt-controller/fsl,ls-extirq.txt         | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
new file mode 100644
index 000000000000..7e4680866364
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -0,0 +1,37 @@
+* Freescale Layerscape external IRQs
+
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+the polarity of certain external interrupt lines.
+
+Required properties:
+- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Use the same format as specified by GIC in arm,gic.txt.
+- interrupt-parent: phandle of GIC.
+- syscon: phandle of Supplemental Configuration Unit (scfg) and offset
+  to the INTPCR register.
+- interrupts: Specifies the mapping to interrupt numbers in the parent
+  interrupt controller. Interrupts are mapped one-to-one to parent
+  interrupts.
+
+Optional properties:
+- bit-reverse: This boolean property should be set on the LS1021A if
+  the SCFGREVCR register has been set to all-ones (which is usually
+  the case), meaning that all reads and writes of SCFG registers are
+  implicitly bit-reversed. Other compatible platforms do not have such
+  a register.
+
+Example:
+	extirq: extirq {
+		compatible = "fsl,ls1021a-extirq";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		syscon = <&scfg 0x1ac>;
+		interrupts = <163 164 165 167 168 169>;
+		bit-reverse;
+	};
+
+
+	interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			      <&extirq GIC_SPI 1 IRQ_TYPE_LEVEL_LOW>;
-- 
2.7.4