linux-kernel - Re: [PATCH v2] ARM: dts: sunxi: Add sid for a83t

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 21 Dec 2017 23:39:21 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:     Kyle Evans <kevans91@....edu>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>,
        Russell King <linux@...linux.org.uk>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-sunxi <linux-sunxi@...glegroups.com>
Subject: Re: [PATCH v2] ARM: dts: sunxi: Add sid for a83t

On Thu, Dec 21, 2017 at 11:26 PM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> Hi,
>
> On Thu, Dec 21, 2017 at 09:19:24AM -0600, Kyle Evans wrote:
>> On Thu, Dec 21, 2017 at 8:55 AM, Maxime Ripard
>> <maxime.ripard@...e-electrons.com> wrote:
>> > Hi Kyle,
>> >
>> > On Tue, Dec 19, 2017 at 03:05:23PM -0600, kevans91@....edu wrote:
>> >> Allwinner a83t has a 1 KB sid block with efuse for security rootkey and
>> >> thermal calibration data, add node to describe it.
>> >>
>> >> a83t-sid is not currently supported by nvmem/sunxi-sid, but it is
>> >> supported in an external driver for FreeBSD.
>> >>
>> >> Signed-off-by: Kyle Evans <kevans91@....edu>
>> >
>> > The patch looks fine in itself, but we've had a number of issues with
>> > the register layout (and access patterns) in the past, so I'd rather
>> > have something that works in Linux too if possible.
>>
>> I have a patch that I think should make it work fine on Linux [1], but
>> I'm afraid I have little to no capability to test it myself and so I
>> did not add it as well.
>>
>> I do know that the rootkey is offset 0x200 into the given space [2],
>> as is the case with the H3, and that the readout quirk is not needed.
>> I wasn't 100% sure that the a83t has 2Kbit worth of efuse space as the
>> H3, but I do know that thermal data can be found at 0x34 and 0x38 in
>> this space.
>
> Then maybe we should leave it aside until someone takes some time on
> the A83t. The good news is that the binding itself looks fine, so as
> far as FreeBSD goes, there shouldn't be anything preventing you from
> using it I guess.
>
> Chen-Yu, what do you think?

Looks good to me.

ChenYu