[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171221220757.24672-1-malat@debian.org>
Date: Thu, 21 Dec 2017 23:07:56 +0100
From: Mathieu Malaterre <malat@...ian.org>
To: Tomi Valkeinen <tomi.valkeinen@...com>
Cc: Lennart Sorensen <lsorense@...lub.uwaterloo.ca>,
Mathieu Malaterre <malat@...ian.org>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
linux-fbdev@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3] Fix loading of module radeonfb on PowerMac
When the linux kernel is build with (typical kernel ship with Debian
installer):
CONFIG_FB_OF=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_FB_RADEON=m
The offb driver takes precedence over module radeonfb. It is then
impossible to load the module, error reported is:
[ 96.551486] radeonfb 0000:00:10.0: enabling device (0006 -> 0007)
[ 96.551526] radeonfb 0000:00:10.0: BAR 0: can't reserve [mem 0x98000000-0x9fffffff pref]
[ 96.551531] radeonfb (0000:00:10.0): cannot request region 0.
[ 96.551545] radeonfb: probe of 0000:00:10.0 failed with error -16
This patch reproduce the behavior of the module radeon, so as to make it
possible to load radeonfb when offb is first loaded.
It should be noticed that `offb_destroy` is never called which explain the
need to skip error detection on the radeon side.
Signed-off-by: Mathieu Malaterre <malat@...ian.org>
Link: https://bugs.debian.org/826629#57
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119741
Suggested-by: Lennart Sorensen <lsorense@...lub.uwaterloo.ca>
---
v2: Only fails when CONFIG_PCC is not set
v3: Only fails when CONFIG_FB_OF is not set, CONFIG_PCC was too broad. Since the conflicts in region is due to OFfb explicitly refers to it.
drivers/video/fbdev/aty/radeon_base.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 4d77daeecf99..221879196531 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -2259,6 +2259,22 @@ static const struct bin_attribute edid2_attr = {
.read = radeon_show_edid2,
};
+static int radeon_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return -ENOMEM;
+
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+ remove_conflicting_framebuffers(ap, KBUILD_MODNAME, false);
+ kfree(ap);
+
+ return 0;
+}
static int radeonfb_pci_register(struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -2312,19 +2328,27 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
rinfo->fb_base_phys = pci_resource_start (pdev, 0);
rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
+ ret = radeon_kick_out_firmware_fb(pdev);
+ if (ret)
+ return ret;
+
/* request the mem regions */
ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
if (ret < 0) {
+#ifndef CONFIG_FB_OF
printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
pci_name(rinfo->pdev));
goto err_release_fb;
+#endif
}
ret = pci_request_region(pdev, 2, "radeonfb mmio");
if (ret < 0) {
+#ifndef CONFIG_FB_OF
printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
pci_name(rinfo->pdev));
goto err_release_pci0;
+#endif
}
/* map the regions */
@@ -2509,10 +2533,12 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
iounmap(rinfo->mmio_base);
err_release_pci2:
pci_release_region(pdev, 2);
+#ifndef CONFIG_FB_OF
err_release_pci0:
pci_release_region(pdev, 0);
err_release_fb:
framebuffer_release(info);
+#endif
err_disable:
err_out:
return ret;
--
2.11.0
Powered by blists - more mailing lists