| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 22 Dec 2017 12:21:52 +0800
From: Peng Li <lipeng321@...wei.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxarm@...wei.com>, <salil.mehta@...wei.com>,
<lipeng321@...wei.com>
Subject: [PATCH V5 net-next 13/17] net: hns3: add support to update flow control settings after autoneg
When auto-negotiation is enabled, the MAC flow control settings is
based on the flow control negotiation result. And it should be configured
after a valid link has been established. This patch adds support to update
flow control settings after auto-negotiation has completed.
Signed-off-by: Peng Li <lipeng321@...wei.com>
Signed-off-by: Fuyun Liang <liangfuyun1@...wei.com>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 36 ++++++++++++++++++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 +++
3 files changed, 41 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0f55ee6..bb31212 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4707,6 +4707,42 @@ static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
return 0;
}
+int hclge_cfg_flowctrl(struct hclge_dev *hdev)
+{
+ struct phy_device *phydev = hdev->hw.mac.phydev;
+ u16 remote_advertising = 0;
+ u16 local_advertising = 0;
+ u32 rx_pause, tx_pause;
+ u8 flowctl;
+
+ if (!phydev->link || !phydev->autoneg)
+ return 0;
+
+ if (phydev->advertising & ADVERTISED_Pause)
+ local_advertising = ADVERTISE_PAUSE_CAP;
+
+ if (phydev->advertising & ADVERTISED_Asym_Pause)
+ local_advertising |= ADVERTISE_PAUSE_ASYM;
+
+ if (phydev->pause)
+ remote_advertising = LPA_PAUSE_CAP;
+
+ if (phydev->asym_pause)
+ remote_advertising |= LPA_PAUSE_ASYM;
+
+ flowctl = mii_resolve_flowctrl_fdx(local_advertising,
+ remote_advertising);
+ tx_pause = flowctl & FLOW_CTRL_TX;
+ rx_pause = flowctl & FLOW_CTRL_RX;
+
+ if (phydev->duplex == HCLGE_MAC_HALF) {
+ tx_pause = 0;
+ rx_pause = 0;
+ }
+
+ return hclge_cfg_pauseparam(hdev, rx_pause, tx_pause);
+}
+
static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
u32 *rx_en, u32 *tx_en)
{
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index cda520c..28cc063 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -602,4 +602,5 @@ int hclge_set_vf_vlan_common(struct hclge_dev *vport, int vfid,
void hclge_mbx_handler(struct hclge_dev *hdev);
void hclge_reset_tqp(struct hnae3_handle *handle, u16 queue_id);
+int hclge_cfg_flowctrl(struct hclge_dev *hdev);
#endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 7069e94..3745153 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -183,6 +183,10 @@ static void hclge_mac_adjust_link(struct net_device *netdev)
ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex);
if (ret)
netdev_err(netdev, "failed to adjust link.\n");
+
+ ret = hclge_cfg_flowctrl(hdev);
+ if (ret)
+ netdev_err(netdev, "failed to configure flow control.\n");
}
int hclge_mac_start_phy(struct hclge_dev *hdev)
--
1.9.1
Powered by blists - more mailing lists