lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <1514387627-27817-2-git-send-email-stanislav.nijnikov@wdc.com> Date: Wed, 27 Dec 2017 17:13:39 +0200 From: Stanislav Nijnikov <stanislav.nijnikov@....com> To: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org, gregkh@...uxfoundation.org Cc: alex.lemberg@....com, Stanislav Nijnikov <stanislav.nijnikov@....com> Subject: [PATCH v2 1/9] ufs: sysfs: device descriptor This patch introduces a sysfs group entry for the UFS device descriptor parameters. The group adds "device_descriptor" folder under the UFS driver sysfs entry (/sys/bus/platform/drivers/ufshcd/*). The parameters are shown as hexadecimal numbers. The full information about the parameters could be found at UFS specifications 2.1. Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@....com> --- Documentation/ABI/testing/sysfs-driver-ufs | 223 +++++++++++++++++++++++++++++ drivers/scsi/ufs/Makefile | 2 +- drivers/scsi/ufs/ufs-sysfs.c | 158 ++++++++++++++++++++ drivers/scsi/ufs/ufs-sysfs.h | 10 ++ drivers/scsi/ufs/ufs.h | 8 ++ drivers/scsi/ufs/ufshcd.c | 13 +- drivers/scsi/ufs/ufshcd.h | 4 + 7 files changed, 412 insertions(+), 6 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-driver-ufs create mode 100644 drivers/scsi/ufs/ufs-sysfs.c create mode 100644 drivers/scsi/ufs/ufs-sysfs.h diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs new file mode 100644 index 0000000..da39c63 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -0,0 +1,223 @@ +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the device type. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the device class. This is one of the UFS + device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the UFS storage subclass. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the protocol supported by an UFS device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows number of logical units. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows number of well known logical units. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows value that indicates whether the device is + enabled for boot. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows value that indicates whether the device + descriptor could be read after partial initialization phase + of the boot sequence. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows value that defines the power mode after + device initialization or hardware reset. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the high priority lun. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the secure removal type. This is one of + the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows whether the security lun is supported. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the background operations termination + latency. This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the initial active ICC level. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the specification version. This is one + of the UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the manufacturing date in BCD format. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the manufacturee ID. This is one of the + UFS device descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the maximum number of outstanding RTTs + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the frequency and method of the realtime + clock update. This is one of the UFS device descriptor + parameters. The full information about the descriptor + could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows which features are supported by the device. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be + found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the FFU timeout. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the device queue depth. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the device version. This is one of the + UFS device descriptor parameters. The full information + about the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows number of secure write protect areas + supported by the device. This is one of the UFS device + descriptor parameters. The full information about + the descriptor could be found at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the maximum amount of data that may be + written during the pre-soldering phase of the PSA flow. + This is one of the UFS device descriptor parameters. + The full information about the descriptor could be found + at UFS specifications 2.1. + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout +Date: August 2017 +Contact: Stanislav Nijnikov <stanislav.nijnikov@....com> +Description: This file shows the command maximum timeout for a change + in PSA state. This is one of the UFS device descriptor + parameters. The full information about the descriptor could + be found at UFS specifications 2.1. + The file is read only. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 9310c6c..1fa74c1 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -3,6 +3,6 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o -obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o +obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o ufs-sysfs.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c new file mode 100644 index 0000000..63a8e68 --- /dev/null +++ b/drivers/scsi/ufs/ufs-sysfs.c @@ -0,0 +1,158 @@ +#include <linux/err.h> +#include <linux/string.h> + +#include "ufs.h" +#include "ufs-sysfs.h" +/* collision between the device descriptor parameter and the definition */ +#undef DEVICE_CLASS + +enum ufs_desc_param_size { + UFS_PARAM_BYTE_SIZE = 1, + UFS_PARAM_WORD_SIZE = 2, + UFS_PARAM_DWORD_SIZE = 4, + UFS_PARAM_QWORD_SIZE = 8, +}; + +static inline ssize_t ufs_sysfs_read_desc_param( + struct ufs_hba *hba, u8 desc_idn, u8 index, char *buf, u8 off, + enum ufs_desc_param_size param_size) +{ + int desc_len; + int ret; + u8 *desc_buf; + + if (ufshcd_map_desc_id_to_length(hba, desc_idn, &desc_len) || + off >= desc_len) + return -EINVAL; + desc_buf = kzalloc(desc_len, GFP_ATOMIC); + if (!desc_buf) + return -ENOMEM; + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, + desc_idn, index, 0, desc_buf, &desc_len); + if (ret) + return -EINVAL; + switch (param_size) { + case UFS_PARAM_BYTE_SIZE: + ret = sprintf(buf, "0x%02X\n", desc_buf[off]); + break; + case UFS_PARAM_WORD_SIZE: + ret = sprintf(buf, "0x%04X\n", + be16_to_cpu(*((u16 *)(desc_buf + off)))); + break; + case UFS_PARAM_DWORD_SIZE: + ret = sprintf(buf, "0x%08X\n", + be32_to_cpu(*((u32 *)(desc_buf + off)))); + break; + case UFS_PARAM_QWORD_SIZE: + ret = sprintf(buf, "0x%016llX\n", + be64_to_cpu(*((u64 *)(desc_buf + off)))); + break; + } + kfree(desc_buf); + + return ret; +} + +#define ufs_sysfs_desc_param_show(_name, _puname, _duname, _size) \ +static ssize_t _name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ufs_hba *hba = dev_get_drvdata(dev); \ + return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \ + 0, buf, _duname##_DESC_PARAM_##_puname, \ + UFS_PARAM_##_size##_SIZE); \ +} + +#define UFS_DESC_PARAM(_pname, _puname, _duname, _size) \ + ufs_sysfs_desc_param_show(_pname, _puname, _duname, _size) \ + static DEVICE_ATTR_RO(_pname) + +#define UFS_DEVICE_DESC_PARAM(_name, _uname, _size) \ + UFS_DESC_PARAM(_name, _uname, DEVICE, _size) + +UFS_DEVICE_DESC_PARAM(device_type, DEVICE_TYPE, BYTE); +UFS_DEVICE_DESC_PARAM(device_class, DEVICE_CLASS, BYTE); +UFS_DEVICE_DESC_PARAM(device_sub_class, DEVICE_SUB_CLASS, BYTE); +UFS_DEVICE_DESC_PARAM(protocol, PRTCL, BYTE); +UFS_DEVICE_DESC_PARAM(number_of_luns, NUM_LU, BYTE); +UFS_DEVICE_DESC_PARAM(number_of_wluns, NUM_WLU, BYTE); +UFS_DEVICE_DESC_PARAM(boot_enable, BOOT_ENBL, BYTE); +UFS_DEVICE_DESC_PARAM(descriptor_access_enable, DESC_ACCSS_ENBL, BYTE); +UFS_DEVICE_DESC_PARAM(initial_power_mode, INIT_PWR_MODE, BYTE); +UFS_DEVICE_DESC_PARAM(high_priority_lun, HIGH_PR_LUN, BYTE); +UFS_DEVICE_DESC_PARAM(secure_removal_type, SEC_RMV_TYPE, BYTE); +UFS_DEVICE_DESC_PARAM(support_security_lun, SEC_LU, BYTE); +UFS_DEVICE_DESC_PARAM(bkops_termination_latency, BKOP_TERM_LT, BYTE); +UFS_DEVICE_DESC_PARAM(initial_active_icc_level, ACTVE_ICC_LVL, BYTE); +UFS_DEVICE_DESC_PARAM(specification_version, SPEC_VER, WORD); +UFS_DEVICE_DESC_PARAM(manufacturing_date, MANF_DATE, WORD); +UFS_DEVICE_DESC_PARAM(manufacturer_id, MANF_ID, WORD); +UFS_DEVICE_DESC_PARAM(rtt_capability, RTT_CAP, BYTE); +UFS_DEVICE_DESC_PARAM(rtc_update, FRQ_RTC, WORD); +UFS_DEVICE_DESC_PARAM(ufs_features, UFS_FEAT, BYTE); +UFS_DEVICE_DESC_PARAM(ffu_timeout, FFU_TMT, BYTE); +UFS_DEVICE_DESC_PARAM(queue_depth, Q_DPTH, BYTE); +UFS_DEVICE_DESC_PARAM(device_version, DEV_VER, WORD); +UFS_DEVICE_DESC_PARAM(number_of_secure_wpa, NUM_SEC_WPA, BYTE); +UFS_DEVICE_DESC_PARAM(psa_max_data_size, PSA_MAX_DATA, DWORD); +UFS_DEVICE_DESC_PARAM(psa_state_timeout, PSA_TMT, BYTE); + +static struct attribute *ufs_sysfs_device_descriptor[] = { + &dev_attr_device_type.attr, + &dev_attr_device_class.attr, + &dev_attr_device_sub_class.attr, + &dev_attr_protocol.attr, + &dev_attr_number_of_luns.attr, + &dev_attr_number_of_wluns.attr, + &dev_attr_boot_enable.attr, + &dev_attr_descriptor_access_enable.attr, + &dev_attr_initial_power_mode.attr, + &dev_attr_high_priority_lun.attr, + &dev_attr_secure_removal_type.attr, + &dev_attr_support_security_lun.attr, + &dev_attr_bkops_termination_latency.attr, + &dev_attr_initial_active_icc_level.attr, + &dev_attr_specification_version.attr, + &dev_attr_manufacturing_date.attr, + &dev_attr_manufacturer_id.attr, + &dev_attr_rtt_capability.attr, + &dev_attr_rtc_update.attr, + &dev_attr_ufs_features.attr, + &dev_attr_ffu_timeout.attr, + &dev_attr_queue_depth.attr, + &dev_attr_device_version.attr, + &dev_attr_number_of_secure_wpa.attr, + &dev_attr_psa_max_data_size.attr, + &dev_attr_psa_state_timeout.attr, + NULL, +}; + +static const struct attribute_group ufs_sysfs_device_descriptor_group = { + .name = "device_descriptor", + .attrs = ufs_sysfs_device_descriptor, +}; + +static const struct attribute_group *ufs_sysfs_groups[] = { + &ufs_sysfs_device_descriptor_group, + NULL, +}; + +void ufs_sysfs_add_device_management(struct ufs_hba *hba) +{ + int ret; + + ret = sysfs_create_groups(&hba->dev->kobj, ufs_sysfs_groups); + if (ret) + dev_err(hba->dev, + "%s: sysfs groups creation failed (err = %d)\n", + __func__, ret); +} +EXPORT_SYMBOL(ufs_sysfs_add_device_management); + +void ufs_sysfs_remove_device_management(struct ufs_hba *hba) +{ + sysfs_remove_groups(&hba->dev->kobj, ufs_sysfs_groups); +} +EXPORT_SYMBOL(ufs_sysfs_remove_device_management); + +MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/scsi/ufs/ufs-sysfs.h new file mode 100644 index 0000000..369ba21 --- /dev/null +++ b/drivers/scsi/ufs/ufs-sysfs.h @@ -0,0 +1,10 @@ +#ifndef __UFS_SYSFS_H__ +#define __UFS_SYSFS_H__ + +#include <linux/sysfs.h> + +#include "ufshcd.h" + +void ufs_sysfs_add_device_management(struct ufs_hba *hba); +void ufs_sysfs_remove_device_management(struct ufs_hba *hba); +#endif diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index 54deeb7..6ae1e08 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -220,6 +220,14 @@ enum device_desc_param { DEVICE_DESC_PARAM_UD_LEN = 0x1B, DEVICE_DESC_PARAM_RTT_CAP = 0x1C, DEVICE_DESC_PARAM_FRQ_RTC = 0x1D, + DEVICE_DESC_PARAM_UFS_FEAT = 0x1F, + DEVICE_DESC_PARAM_FFU_TMT = 0x20, + DEVICE_DESC_PARAM_Q_DPTH = 0x21, + DEVICE_DESC_PARAM_DEV_VER = 0x22, + DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24, + DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25, + DEVICE_DESC_PARAM_PSA_TMT = 0x29, + DEVICE_DESC_PARAM_PRDCT_REV = 0x2A, }; /* diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a355d98..6e15cda 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -44,6 +44,7 @@ #include "ufshcd.h" #include "ufs_quirks.h" #include "unipro.h" +#include "ufs-sysfs.h" #define CREATE_TRACE_POINTS #include <trace/events/ufs.h> @@ -2894,11 +2895,10 @@ static int __ufshcd_query_descriptor(struct ufs_hba *hba, * The buf_len parameter will contain, on return, the length parameter * received on the response. */ -static int ufshcd_query_descriptor_retry(struct ufs_hba *hba, - enum query_opcode opcode, - enum desc_idn idn, u8 index, - u8 selector, - u8 *desc_buf, int *buf_len) +int ufshcd_query_descriptor_retry(struct ufs_hba *hba, + enum query_opcode opcode, + enum desc_idn idn, u8 index, u8 selector, + u8 *desc_buf, int *buf_len) { int err; int retries; @@ -2912,6 +2912,7 @@ static int ufshcd_query_descriptor_retry(struct ufs_hba *hba, return err; } +EXPORT_SYMBOL(ufshcd_query_descriptor_retry); /** * ufshcd_read_desc_length - read the specified descriptor length from header @@ -7704,10 +7705,12 @@ static inline void ufshcd_add_sysfs_nodes(struct ufs_hba *hba) { ufshcd_add_rpm_lvl_sysfs_nodes(hba); ufshcd_add_spm_lvl_sysfs_nodes(hba); + ufs_sysfs_add_device_management(hba); } static inline void ufshcd_remove_sysfs_nodes(struct ufs_hba *hba) { + ufs_sysfs_remove_device_management(hba); device_remove_file(hba->dev, &hba->rpm_lvl_attr); device_remove_file(hba->dev, &hba->spm_lvl_attr); } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 1332e54..6a0ec4b 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -841,6 +841,10 @@ static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info) } /* Expose Query-Request API */ +int ufshcd_query_descriptor_retry(struct ufs_hba *hba, + enum query_opcode opcode, + enum desc_idn idn, u8 index, u8 selector, + u8 *desc_buf, int *buf_len); int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, enum flag_idn idn, bool *flag_res); int ufshcd_hold(struct ufs_hba *hba, bool async); -- 2.7.4
Powered by blists - more mailing lists