lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20171227164616.360247498@linuxfoundation.org> Date: Wed, 27 Dec 2017 17:46:28 +0100 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Maxime Chevallier <maxime.chevallier@...le.fr>, Mark Brown <broonie@...nel.org> Subject: [PATCH 4.14 55/74] spi: a3700: Fix clk prescaling for coefficient over 15 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Maxime Chevallier <maxime.chevallier@...le.fr> commit 251c201bf4f8b5bf4f1ccb4f8920eed2e1f57580 upstream. The Armada 3700 SPI controller has 2 ranges of prescaler coefficients. One ranging from 0 to 15 by steps of 1, and one ranging from 0 to 30 by steps of 2. This commit fixes the prescaler coefficients that are over 15 so that it uses the correct range of values. The prescaling coefficient is rounded to the upper value if it is odd. This was tested on Espressobin with spidev and a locigal analyser. Signed-off-by: Maxime Chevallier <maxime.chevallier@...le.fr> Signed-off-by: Mark Brown <broonie@...nel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/spi/spi-armada-3700.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -79,6 +79,7 @@ #define A3700_SPI_BYTE_LEN BIT(5) #define A3700_SPI_CLK_PRESCALE BIT(0) #define A3700_SPI_CLK_PRESCALE_MASK (0x1f) +#define A3700_SPI_CLK_EVEN_OFFS (0x10) #define A3700_SPI_WFIFO_THRS_BIT 28 #define A3700_SPI_RFIFO_THRS_BIT 24 @@ -220,6 +221,13 @@ static void a3700_spi_clock_set(struct a prescale = DIV_ROUND_UP(clk_get_rate(a3700_spi->clk), speed_hz); + /* For prescaler values over 15, we can only set it by steps of 2. + * Starting from A3700_SPI_CLK_EVEN_OFFS, we set values from 0 up to + * 30. We only use this range from 16 to 30. + */ + if (prescale > 15) + prescale = A3700_SPI_CLK_EVEN_OFFS + DIV_ROUND_UP(prescale, 2); + val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG); val = val & ~A3700_SPI_CLK_PRESCALE_MASK;
Powered by blists - more mailing lists