[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqJwt1FfdiOCRnMSKWmAW668XqGvKsuZqKrXfkNnt3MPRQ@mail.gmail.com>
Date: Wed, 27 Dec 2017 11:24:01 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Andy Shevchenko <andy.shevchenko@...il.com>,
Mark Rutland <mark.rutland@....com>,
Javier Martinez Canillas <javier@...hile0.org>,
David Lechner <david@...hnology.com>,
Divagar Mohandass <divagar.mohandass@...el.com>,
Peter Rosin <peda@...ntia.se>,
Linux I2C <linux-i2c@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/5] dt-bindings: at24: consistently document the
compatible property
On Wed, Dec 27, 2017 at 7:50 AM, Bartosz Golaszewski <brgl@...ev.pl> wrote:
> Current description of the compatible property for at24 is quite vague.
>
> State explicitly that any "<manufacturer>,<model>" pair is accepted as
> long as one of the listed strings is used as fallback.
>
> Signed-off-by: Bartosz Golaszewski <brgl@...ev.pl>
> ---
> Documentation/devicetree/bindings/eeprom/at24.txt | 37 +++++++++--------------
> 1 file changed, 15 insertions(+), 22 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
> index cbc80e194ac6..b5ce5a247554 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.txt
> +++ b/Documentation/devicetree/bindings/eeprom/at24.txt
> @@ -2,28 +2,21 @@ EEPROMs (I2C)
>
> Required properties:
>
> - - compatible : should be "<manufacturer>,<type>", like these:
> -
> - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
> - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
> - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
> -
> - "catalyst,24c32"
> -
> - "microchip,24c128"
> -
> - "ramtron,24c64"
> -
> - "renesas,r1ex24002"
> -
> - The following manufacturers values have been deprecated:
> - "at", "at24"
> -
> - If there is no specific driver for <manufacturer>, a generic
> - device with <type> and manufacturer "atmel" should be used.
> - Possible types are:
> - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
> - "24c128", "24c256", "24c512", "24c1024", "spd"
> + - compatible: must be a "<manufacturer>,<model>" pair with one of the
Also, why do you add "must" here and then fix it with "Must" in patch
3? Just get it right here.
Rob
Powered by blists - more mailing lists