lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171229114131.22296-2-vigneshr@ti.com>
Date:   Fri, 29 Dec 2017 17:11:30 +0530
From:   Vignesh R <vigneshr@...com>
To:     Lorenzo Pieralisi <lorenzo.pieralisi@....com>
CC:     Kishon Vijay Abraham I <kishon@...com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        <linux-omap@...r.kernel.org>, <linux-pci@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Vignesh R <vigneshr@...com>
Subject: [PATCH v2 1/2] PCI: dra7xx: Fix legacy INTD IRQ handling

Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
4 which is numbered 0-3. Therefore when INTD IRQ line is used with
pci-dra7xx driver following warning is seen:

       WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
       error: hwirq 0x4 is too large for dummy

Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
range into the 0-3 as done in other PCIe drivers.

Suggested-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reported-by: Chris Welch <Chris.Welch@...visolutions.com>
Signed-off-by: Vignesh R <vigneshr@...com>
---
 drivers/pci/dwc/pci-dra7xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 58aed0896468..892f93910012 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -226,6 +226,7 @@ static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
 
 static const struct irq_domain_ops intx_domain_ops = {
 	.map = dra7xx_pcie_intx_map,
+	.xlate = pci_irqd_intx_xlate,
 };
 
 static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
@@ -269,7 +270,7 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
 	case INTC:
 	case INTD:
 		generic_handle_irq(irq_find_mapping(dra7xx->irq_domain,
-						    ffs(reg)));
+						    ffs(reg) - 1));
 		break;
 	}
 
-- 
2.15.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ