| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1514872154.2743.135.camel@kernel.crashing.org>
Date: Tue, 02 Jan 2018 16:49:14 +1100
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
To: Joel Stanley <joel@....id.au>, Lee Jones <lee.jones@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Andrew Jeffery <andrew@...id.au>, Jeremy Kerr <jk@...abs.org>,
Rick Altherr <raltherr@...gle.com>,
Ryan Chen <ryan_chen@...eedtech.com>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH v7 2/5] clk: aspeed: Register core clocks
On Fri, 2017-12-22 at 13:15 +1030, Joel Stanley wrote:
> This registers the core clocks; those which are required to calculate
> the rate of the timer peripheral so the system can load a clocksource
> driver.
>
> Reviewed-by: Andrew Jeffery <andrew@...id.au>
> Signed-off-by: Joel Stanley <joel@....id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> ---
> v5:
> - Add Andrew's Reviewed-by
> v4:
> - Add defines to document the BIT() macros
> v3:
> - Fix ast2400 ahb calculation
> - Remove incorrect 'this is wrong' comment
> - Separate out clkin calc to be per platform
> - Support 48MHz clkin on ast2400
> ---
> drivers/clk/clk-aspeed.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 177 insertions(+)
>
> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
> index 7a86ee08ea4f..5adedda82d26 100644
> --- a/drivers/clk/clk-aspeed.c
> +++ b/drivers/clk/clk-aspeed.c
> @@ -13,7 +13,23 @@
>
> #define ASPEED_NUM_CLKS 35
>
> +#define ASPEED_RESET_CTRL 0x04
> +#define ASPEED_CLK_SELECTION 0x08
> +#define ASPEED_CLK_STOP_CTRL 0x0c
> +#define ASPEED_MPLL_PARAM 0x20
> +#define ASPEED_HPLL_PARAM 0x24
> +#define AST2500_HPLL_BYPASS_EN BIT(20)
> +#define AST2400_HPLL_STRAPPED BIT(18)
> +#define AST2400_HPLL_BYPASS_EN BIT(17)
> +#define ASPEED_MISC_CTRL 0x2c
> +#define UART_DIV13_EN BIT(12)
> #define ASPEED_STRAP 0x70
> +#define CLKIN_25MHZ_EN BIT(23)
> +#define AST2400_CLK_SOURCE_SEL BIT(18)
> +#define ASPEED_CLK_SELECTION_2 0xd8
> +
> +/* Globally visible clocks */
> +static DEFINE_SPINLOCK(aspeed_clk_lock);
>
> /* Keeps track of all clocks */
> static struct clk_hw_onecell_data *aspeed_clk_data;
> @@ -91,6 +107,160 @@ static const struct aspeed_gate_data aspeed_gates[] = {
> [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
> };
>
> +static const struct clk_div_table ast2400_div_table[] = {
> + { 0x0, 2 },
> + { 0x1, 4 },
> + { 0x2, 6 },
> + { 0x3, 8 },
> + { 0x4, 10 },
> + { 0x5, 12 },
> + { 0x6, 14 },
> + { 0x7, 16 },
> + { 0 }
> +};
> +
> +static const struct clk_div_table ast2500_div_table[] = {
> + { 0x0, 4 },
> + { 0x1, 8 },
> + { 0x2, 12 },
> + { 0x3, 16 },
> + { 0x4, 20 },
> + { 0x5, 24 },
> + { 0x6, 28 },
> + { 0x7, 32 },
> + { 0 }
> +};
> +
> +static struct clk_hw *aspeed_ast2400_calc_pll(const char *name, u32 val)
> +{
> + unsigned int mult, div;
> +
> + if (val & AST2400_HPLL_BYPASS_EN) {
> + /* Pass through mode */
> + mult = div = 1;
> + } else {
> + /* F = 24Mhz * (2-OD) * [(N + 2) / (D + 1)] */
> + u32 n = (val >> 5) & 0x3f;
> + u32 od = (val >> 4) & 0x1;
> + u32 d = val & 0xf;
> +
> + mult = (2 - od) * (n + 2);
> + div = d + 1;
> + }
> + return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
> + mult, div);
> +};
> +
> +static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
> +{
> + unsigned int mult, div;
> +
> + if (val & AST2500_HPLL_BYPASS_EN) {
> + /* Pass through mode */
> + mult = div = 1;
> + } else {
> + /* F = clkin * [(M+1) / (N+1)] / (P + 1) */
> + u32 p = (val >> 13) & 0x3f;
> + u32 m = (val >> 5) & 0xff;
> + u32 n = val & 0x1f;
> +
> + mult = (m + 1) / (n + 1);
> + div = p + 1;
> + }
> +
> + return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
> + mult, div);
> +}
> +
> +static void __init aspeed_ast2400_cc(struct regmap *map)
> +{
> + struct clk_hw *hw;
> + u32 val, freq, div;
> +
> + /*
> + * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by
> + * strapping
> + */
> + regmap_read(map, ASPEED_STRAP, &val);
> + if (val & CLKIN_25MHZ_EN)
> + freq = 25000000;
> + else if (val & AST2400_CLK_SOURCE_SEL)
> + freq = 48000000;
> + else
> + freq = 24000000;
> + hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
> + pr_debug("clkin @%u MHz\n", freq / 1000000);
> +
> + /*
> + * High-speed PLL clock derived from the crystal. This the CPU clock,
> + * and we assume that it is enabled
> + */
> + regmap_read(map, ASPEED_HPLL_PARAM, &val);
> + WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured");
> + aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val);
> +
> + /*
> + * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK)
> + * 00: Select CPU:AHB = 1:1
> + * 01: Select CPU:AHB = 2:1
> + * 10: Select CPU:AHB = 4:1
> + * 11: Select CPU:AHB = 3:1
> + */
> + regmap_read(map, ASPEED_STRAP, &val);
> + val = (val >> 10) & 0x3;
> + div = val + 1;
> + if (div == 3)
> + div = 4;
> + else if (div == 4)
> + div = 3;
> + hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
> + aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
> +
> + /* APB clock clock selection register SCU08 (aka PCLK) */
> + hw = clk_hw_register_divider_table(NULL, "apb", "hpll", 0,
> + scu_base + ASPEED_CLK_SELECTION, 23, 3, 0,
> + ast2400_div_table,
> + &aspeed_clk_lock);
> + aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
> +}
> +
> +static void __init aspeed_ast2500_cc(struct regmap *map)
> +{
> + struct clk_hw *hw;
> + u32 val, freq, div;
> +
> + /* CLKIN is the crystal oscillator, 24 or 25MHz selected by strapping */
> + regmap_read(map, ASPEED_STRAP, &val);
> + if (val & CLKIN_25MHZ_EN)
> + freq = 25000000;
> + else
> + freq = 24000000;
> + hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
> + pr_debug("clkin @%u MHz\n", freq / 1000000);
> +
> + /*
> + * High-speed PLL clock derived from the crystal. This the CPU clock,
> + * and we assume that it is enabled
> + */
> + regmap_read(map, ASPEED_HPLL_PARAM, &val);
> + aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2500_calc_pll("hpll", val);
> +
> + /* Strap bits 11:9 define the AXI/AHB clock frequency ratio (aka HCLK)*/
> + regmap_read(map, ASPEED_STRAP, &val);
> + val = (val >> 9) & 0x7;
> + WARN(val == 0, "strapping is zero: cannot determine ahb clock");
> + div = 2 * (val + 1);
> + hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
> + aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
> +
> + /* APB clock clock selection register SCU08 (aka PCLK) */
> + regmap_read(map, ASPEED_CLK_SELECTION, &val);
> + val = (val >> 23) & 0x7;
> + div = 4 * (val + 1);
> + hw = clk_hw_register_fixed_factor(NULL, "apb", "hpll", 0, 1, div);
> + aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
> +};
> +
> static void __init aspeed_cc_init(struct device_node *np)
> {
> struct regmap *map;
> @@ -132,6 +302,13 @@ static void __init aspeed_cc_init(struct device_node *np)
> return;
> }
>
> + if (of_device_is_compatible(np, "aspeed,ast2400-scu"))
> + aspeed_ast2400_cc(map);
> + else if (of_device_is_compatible(np, "aspeed,ast2500-scu"))
> + aspeed_ast2500_cc(map);
> + else
> + pr_err("unknown platform, failed to add clocks\n");
> +
> aspeed_clk_data->num = ASPEED_NUM_CLKS;
> ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data);
> if (ret)
Powered by blists - more mailing lists